newwear T3 Smart Watch User Manual
- June 10, 2024
- newwear
Table of Contents
T3 Smart Watch
User Manual
Please read the instructions carefully and keep safe.
Watch client download
Scan the QR code below to download and install the watch client.
http://plus.crrepa.com/app-download/dafit
Full touch
Slide down into the control center, slide up to check the message, slide left
into the main function interface, and slide right into the express center;
Button
POWER key
Press short: tum on/off/return to the dial interface.
Long press: on/off
SPORT key
Press short: to highlight the screen/ enter the main menu/return to the
previous interface.
Press: to enter sports mode.
Watch charging and activation
It can be activated by charging before using the watch for the first time;
The magnetic
charger used is attached to the metal contact on the back of the watch, and
the other end of the charging cable is connected to the 5V1A USB charging head
or computer USB interface.
Connect the watch
Open the mobile client to set personal information.
Open the mobile client to set personal information.
Click your device in the list of scanned devices.
Complete binding
Go to Watch-Settings-About, check the MAC address of the bracelet, and you can
determine your device by the MAC address in the device list;
After the watch is successfully bound, every time the client is opened in the
future, the watch will automatically connect with the mobile phone, and the
data can be synchronized by pulling down the client data page.
Dial setting
Press and hold the dial interface for 1.5 seconds to switch the dials of
different styles in the watch;
After the Bluetooth connection is successful, you can enterAPP- Dial
Selection-Custom Dial; After the Bluetooth connection is successful, you can
go to APP- Dial Selection-More Dial Selection.
Daily data
You can record the total number of steps in the day, the number of walking
steps, calories, exercise duration and other data in each period of the day.
More detailed data can be viewed in the mobile APP;
Sleep monitoring
You can record and display the total sleep duration and the duration of deep
sleep and shallow sleep.
More detailed information analysis data records can be viewed on the mobile
APP;
Heart rate monitoring
Before monitoring the heart rate, first make sure that the watch is properly
worn on the wrist (the best position is one finger wide above the wrist bone).
For the heart rate detection, it is required to wear it tightly so as to avoid
light leakage, and then enter the heart rate detection. During the detection
process, the wrist is required to remain stationary, and the dynamic heart
rate value will be displayed after a few seconds.
Enter the heart
rate icon interface to measure the current heart rate value; Display the
current value of the heart rate interface and the heart rate status of each
period of the day; More detailed information analysis and data records can be
viewed on the APP side;
Take exercise
Click on the
exercise interface to enter the exercise interface, which supports walking,
running, riding, skipping, badminton, basketball, football, swimming,
climbing, tennis, football, golf, yoga, fitness and dancing. More detailed
information analysis and data records can be viewed on the mobile APP;
Blood pressure
Before blood pressure monitoring, first make sure that the watch is properly
worn on the wrist (the best position is one finger wide above the wrist bone).
For blood pressure testing, it is required to wear it tightly to avoid light
leakage, and then enter the blood pressure testing. During the testing
process, the wrist is required to keep still and wait for the blood pressure
value to be displayed.
Enter the blood pressure icon interface to measure the current blood pressure
value and the measured data of the last seven times;
More detailed information analysis and data records can be viewed on the APP
side;
Blood oxygen
Before blood oxygen monitoring, first make sure that the watch is properly
worn on the wrist (the best position is one finger wide above the wrist bone).
Blood oxygen testing requires that the watch be worn tightly to avoid light
leakage and cannot be effectively detected.Then,enter the blood oxygen
testing. During the testing process, the wrist is required to keep still and
wait for the blood oxygen value to be displayed. Enter the blood oxygen icon
interface to measure the current blood oxygen value;
Display the current value of blood oxygen interface and the measurement data
of the last seven times; More detailed information analysis and data records
can be viewed on the APP side;
Weather
The weather interface will display the current weather temperature and slide
up to display the weather information of the next six days;
The weather information needs to be connected to the APP to get data. if the
connection is opened for a long time, the weather information will not be
updated;
Camera
After connecting the mobile APP, the watch can control the mobile phone camera
to take pictures;
After turning on the camera on the mobile phone, press and hold on the watch
camera control page to trigger the camera shutter of the mobile phone;
Music control
After connecting the mobile APP, the watch can control the music player of the
mobile phone;
When the mobile phone plays music, you can use the watch to control the mobile
phone to play/pause the previous song, the next song and adjust the volume.
Alarm clock
The alarm clock of the watch can be set on the APP side and the watch side,
and up to 8 alarms can be set.
After the set time arrives, the watch will display the alarm clock icon and
vibrate;
Message push
The watch can receive and display the notification push and incoming call
reminder on the mobile phone, and can refuse the call. The push option switch
is set in the APP terminal.
The watch message page can store the last 5 message records;
Other functions
Other functions of the watch include: Breathing exercise, pressure detection,
stopwatch, alarm clock, timer, do not disturb mode, power-saving mode,
brightness, vibration, factory settings, restart, shutdown, APP download QR
code, etc.
Sedentary reminder
After connecting the APP, turn on the sedentary reminder;
After sitting for 1 hour, the watch will prompt you to get up and walk;
Frequently asked questions and answers
Why can’t you wear a watch to take a hot bath?
– When bathing, the temperature is relatively high, which will produce a lot
of water vapor;
Why can’t the bracelet receive the message push?
Android phone settings:
– 1.Confirm that the message push switch is turned on on the mobile APP;
– 2.Confirm that the message can be displayed normally on the notification bar
of the mobile phone, and the watch message is pushed by obtaining the message
of the notification bar of the mobile phone; If there is no message in the
notification bar of the mobile phone, the watch will not be able to receive
push; (You need to find the notification settings in the mobile phone
settings, and turn on the notification switches of WeChat, QQ, phone, SMS and
mobile client)
– 3.Open the watch’s accessibility settings. (Find the auxiliary function in
the phone settings, and open the customer auxiliary function settings on the
watch side)
Apple mobile phone set:
– 1.Confirm that the message push switch is turned on at the mobile client;
– 2.Confirm that the mobile phone message can be displayed normally in the
notification bar;
(You need to find the notification settings in the mobile phone settings, and
turn on the notification switches of WeChat, QQ, phone, SMS and mobile client)
Scan QR & download APP
http://plus.crrepa.com/app-download/dafit
FCC Wamning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference In a residential Installation. This equipment generates. uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, mayeause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment Into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation Is subject to
the following two conditions: Willis device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be Installed and operated with
minimum distance Ocm between the radiator and your body.