Nexlev GS-02 Handheld Garment Steamer Instruction Manual
- March 16, 2024
- Nexlev
Table of Contents
**Nexlev GS-02 Handheld Garment Steamer Instruction Manual
**
Product Introduction
Dear Users:
Thank you for choosing our Hand Hold Travel Garment Steamer.
- This machine is mainly used to garment steam function, and the cleaning function is auxiliary. its appearance design is beautiful and the use is simple, economical, safe. This machine is suitable for many kinds of occasions, such as family, clothing industry, wedding industry, curtain, sofa, hotel, etc.
- For silk, wool, chemical fiber, cotton and blended fabric ironing all have unique efficacy,
anti-wrinkle quickly and doesn’t hurt the fabric. And it also has the function of cleaning,
anti-incrustation, dedusting. Moreover the maintenance and the repair is also easy and convenient.
Security and Protection
-
Thermostat: When the tank is lack of water, the thermostat will keep temperature by
controlling the current in the rated temperature. -
Thermal cut-off: when the thermostat is damaged or fails in the host, then protected by
thermal fuse protection device -
When the machine temperature rises to the warning temperature, the thermal fuse will
promptly cut off the host power supply, in order to avoid danger
warning
- Do not eject the steam directly towards people or animal, or scald may be caused.
- Only use the detachable accessories when there is no steam and they are cooled down to avoid scalds.
- Don’t put this product into water or other liquid, nor rinse under the tap.
- Do not operate the machine unless you read this manual thoroughly.
- Please do not dismantle and repair the machine.
Product View
Product Installation
pour water into water tank
Press both sides of the water tank, then take the tank from the main body, pull the stopper and pour water into tank, but please don’t more than the highest water level.（see picture 1-2）
install the accessories
When you need, hold the Machine handle, with the other hand install fur brush
to iron head,
and installed correctly.(see picture 3-4）
After the completion of adding water, plug in power, the Indicator light is
blue( it is heating ). wait for about 30s, the blue indicator light goes out ,
the preheating is finished, the machine is ready for use, press the steam
switch to use it
Note: During the process of using ,if the steam indicator changes to blue
color again, do not care about it , This is caused by the normal operation of
temperature control
If you want to continues steam output, please slide down the steam lock
switch. If you want to
stop, please restore the steam lock switch
when finished using, turn off the power button and pull out the plug, keep the
product cool
down then store it in a dry place, where kids will not touch.
Notice
- Do not operate the machine unless you read this manual thoroughly.
- According to the instruction to use the machine, please don’t use it for any other purpose.
- The water for the machine shall be domestic potable water. If your fabric is important, purified water is recommended.
- Before using this machine to ensure that the working voltage of machine are in conformity with the voltage of power supply in your home. Please use the 30 mA leakage protection switch, and it must use the rated current greater than 6A of the socket.
- Before using this machine, please full out the power cord. Please don’t share a power supply with other large power appliances. Please don’t use line board to avoid overload to prevent fire hazard.
- Before using this machine, please add water, and don’t exceed the maximum water level. Installed to accessories, and then turn on the power switch.
- Please don’t add detergent or other liquid to the water tank.
- This appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
- Children being supervised not to play with the appliance
- The machine is used in normal, the iron brush should steer clear of people ,animals and household appliances and other equipment. You should turn off the power switch when it isn’t use, avoid to hurt or damage for people or others.
- During operation , please don’t touch the steam outlet on the iron head.
- Use dry soft cloth and neutral detergent to clean the machine surface and don’t use solvents such as gasoline, alcohol, banana oil, etc.
- Do not soak the machine, power cord or plug in water or other solution.
- Please do not place the machine in harsh environmentsfor a long time , such as moisture, strong sunlight or corrosive gases, etc.
- Keep the machine away from flammable or explosive objects.
- If find any damage on the equipment especially the machine body and power cord, stop using the machine. Please do not repair by yourself, you should inform the company of the maintenance service center of the professional personnel to repair.
- The machine can only be used indoors.
- When using the product, please pay attention to the danger of steam spitting.
- You should pull out the power plug in clean or other operation.
- Burns careful, pay attention to the danger of steam.
- Always turn off and unplug before refilling , draining, cleaning, moving, or when not in use.
- If the supply cord is damaged, it must be replaced by the manufacturer , its service agent or similarly qualified persons in order to avoid hazard.
- Care should be taken when using appliance due to the emission of steam.
The Technical Parameters
The technical parameters
| Product name | Handheld travel garment steamer |
|---|---|
| Rated power | 1500 W |
| voltage | 220-240 V~ |
| frequency | 50/60 HZ |
| Tank capacity | 300 ml |
Circuit Diagram
Product Maintenance And Fault Recovery
- Clean and Maintenance
- Turn off the power switch and pull out the plug.After cooling for over an hour you may start
cleaning and maintenance.
- Please empty the water tank when finish using to avoid the incrustation.
- Dry the product with a towel, stored in a dry space.
- Please ensure the steam outlet is clean, free of dirty , and there is no obstruction
| Fault | Solution |
|---|---|
| The machine does not produce steam |
- Check whether the water level and water tank are properly loaded.
- Check whether the indicator is green.
- Make the machine in a vertical position.
The water leaked from the tank|
- Ensure that water is not more than the highest water level.
- Please ensure that the water tank and stopper is installed in place.
- According to the instructions, keep to vertical of the machine.
When the steam engine works, there is a loud hum or a pumping sound.| * check the water level, if there is no water or low water level, please fill water promptly.