SCAG Z SZL-36H-18FR Power Equipment Instruction Manual
- May 15, 2024
- SCAG
Table of Contents
SCAG Z SZL-36H-18FR Power Equipment
Product Specifications
-
Model: SZL Liberty Z
-
Available Models: SZL-36H-18FR, SZL-36H-20KT, SZL-36H-20PX, SZL-42H-21FR, SZL-42H-22KT, SZL-42H-22PX, SZL-42H-24SR, SZL-48H-21FR, SZL-48H-22KT, SZL-48H-22PX, SZL-48H-24SR, SZL-52H-23FR, SZL-52H-24KT, SZL-52H-24PX, SZL-52H-24SR, SZL-61H-24FR, SZL-61H-25PX, SZL-61H-26KT, SZL-61H-27SR
-
Serial Number Ranges:
-
* **SZL-36H-18FR** : X0100001 to X0199999 - SZL-36H-20KT : X0200001 to X0299999
- SZL-36H-20PX : X0300001 to X0399999
-
-
Part Number: 06404
-
Printed Date: 11/2023
-
Country of Origin: USA
Product Usage Instructions
Operating Instructions
Follow these steps to operate the SZL Liberty Z efficiently:
- Step 1 : Ensure the serial number of your model falls within the specified range.
- Step 2 : Check all parts listed in the manual are present and properly assembled.
- Step 3 : Start the engine according to the manufacturer’s instructions.
- Step 4 : Engage the cutter deck and adjust the cutting height if needed.
- Step 5 : Move the mower in a controlled manner over the grass area.
- Step 6 : After use, clean the mower and store it in a dry place.
Maintenance Instructions
To ensure the longevity and optimal performance of your SZL Liberty Z, perform the following maintenance tasks regularly:
- Task 1 : Check and tighten any loose bolts or nuts.
- Task 2 : Clean the cutter deck and blades after each use.
- Task 3 : Change the engine oil and replace the air filter as recommended by the manufacturer.
- Task 4 : Sharpen blades at least once a season.
FAQ
- Q: How often should I sharpen the blades of my SZL Liberty Z mower?
- A: It is recommended to sharpen the blades at least once a season or more frequently if you notice decreased cutting efficiency.
- Q: Can I use the SZL Liberty Z mower on wet grass?
- A: It is not advisable to mow wet grass as it can result in an uneven cut and potentially damage the mower. Wait for the grass to dry before mowing for optimal results.
ILLUSTRATED PARTS LIST
- 36H CUTTER DECK
| Ref. No. | Part No. | Qty | Description |
|---|---|---|---|
| 1 | 485805 | 1 | |
| 2 | 483422 | 2 | |
| 3 | 04112-06 | 1 | |
| 4 | 04063-01 | 2 | |
| 5 | 483324 | 2 | |
| 6 | 04021-09 | 3 | |
| 7 | 04041-38 | 2 | |
| 8 | 483453-03 | 2 | |
| 9 | 462944 | 1 | |
| 10 | 483375 | 1 | |
| 11 | 463333 | 1 | |
| 12 | 43708 | 1 | |
| 13 | 424615 | 1 | |
| 14 | 427325 | 1 | |
| 15 | 04011-29 | 3 | |
| 16 | 04001-30 | 1 | |
| 17 | 461950 | 2 | |
| 18 | 483304 | 1 | |
| 19 | 483303 | 2 | |
| 20 | 43693 | 1 | |
| 21 | 462014 | 1 | |
| 22 | 43694 | 1 | |
| 23 | 43695 | 1 | |
| 24 | 04001-121 | 2 | |
| 25 | 04030-07 | 2 | |
| 26 | 04043-06 | 2 | |
| 27 | 482878 | 2 | |
| 28 | 04001-175 | 8 | |
| 29 | 04001-77 | 1 | |
| 30 | 04041-11 | 1 | |
| 31 | 482295 | 2 | |
| 32 | 04117-01 | 1 | |
| 33 | 451926 | 1 | |
| 34 | 04001-09 | 1 | |
| 35 | 462031 | 1 | |
| 36 | 04021-10 | 2 | |
| 37 | 482245 | 1 | |
| 38 | 04001-154 | 1 | |
| 39 | 04001-12 | 1 | |
| 40 | 427319 | 1 | |
| 41 | 04030-03 | 8 | |
| 42 | 04021-22 | 8 | |
| 43 | 04019-04 | 2 | |
| 44 | 04001-31 | 1 | |
| 45 | 04001-136 | 1 | |
| 46 | 43711 | 1 | |
| 47 | 04043-04 | 4 | |
| 48 | 424367 | 2 | |
| 49 | 43063 | 1 | |
| 50 | 04043-11 | 1 |
42H CUTTER DECK
| Ref. No. | Part No. | Qty | Description |
|---|---|---|---|
| 1 | 484695 | 1 | Belt, Cutter Deck |
| 2 | 424615 | 1 | Bracket, Belt Guide |
| 3 | 04021-09 | 3 | Locknut, 3/8 – 16 Elastic Stop |
| 4 | 04043-04 | Washer, Flat 3/8 – .391 x .938 x .105 HD | |
| 5 | 424367 | 3 | Dust Shield |
| 6 | 04112-06 | 3 | Locknut, 3/4 – 16 Spiralock |
| 7 | 04063-01 | 3 | Key, 1/4 x 1/4 x 1-1/4″ |
| 8 | 483213 | 2 | Pulley, 4.50″ Idler |
| 9 | 486910 | 3 | Pulley, 4.62″ |
| 10 | 483422 | 1 | Pulley, 5.00″ Idler |
| 11 | 428614 | 2 | Belt Cover |
| 12 | 04001-154 | 1 | Bolt, Hex Head 5/16 – 18 x 4.75″ |
| 13 | 04021-10 | Locknut, 5/16 – 18 Elastic Stop | |
| 14 | 482245 | 1 | Spring, Discharge Chute |
| 15 | 483496 | 1 | Discharge Chute |
| 16 | 04001-12 | Bolt, Hex Head 5/16 – 18 x 1.75″ | |
| 17 | 43711 | 2 | Spacer |
| 18 | 424479 | 1 | Brace, Pulley |
| 19 | 04043-11 | 1 | Flat Washer, 3/8 – .438 x 1.500 x .1793 HD |
| 20 | 483453-03 | 2 | Bearing, Plastic |
| 21 | 04001-31 | 1 | Bolt, Hex Head 3/8 – 16 x 2.50″ |
| 22 | 43708 | 1 | Pivot Idler |
| 23 | 04001-135 | 1 | Bolt, Hex Head 3/8 -16 x 1.75″ |
| 24 | 04019-04 | Nut, 3/8 – 16 Serrated Flange | |
| 25 | 43063 | 1 | Spacer |
| 26 | 483375 | 1 | Spring, Deck Idler |
| 27 | 04021-22 | 12 | Locknut, 5/16 – 18 Elastic Stop Gr. 8 |
| 28 | 463435 | 1 | Cutter Deck w/Decals, SZL-42H |
| 29 | 04041-38 | 3 | Flat Washer, 3/8 – .406 x 2.25 x .1875 |
| 30 | 04001-77 | 2 | Bolt, Hex Head 3/8 – 16 x 3.50″ |
| 31 | 04001-30 | 1 | Bolt, Hex Head 3/8 – 16 x 4.00″ |
| 32 | 04001-175 | 12 | Bolt, Hex Head 5/16 – 18 x 1.50″ Gr. 8 |
| 33 | 04003-26 | 1 | Bolt, Carriage 3/8 – 16 x 4.00″ |
| 34 | 481632 | 1 | Wheel, Anti-Scalp |
| 35 | 04017-27 | 1 | Bolt, Hex Head 3/8 – 16 x 1.00″ Serrated Flange |
| 36 | 04021-05 | 1 | Locknut, 3/8 – 16 Center Lock |
| 37 | 427865 | 1 | Bracket, Anti-Scalp |
| 38 | 482295 | 2 | Wheel, Anti-Scalp |
| 39 | 04117-01 | 1 | Locknut, 5/16 – 18 Flg. HH |
| 40 | 451926 | 1 | Shaft Weldment |
| 41 | 04001-09 | 1 | Bolt, Hex Head 5/16 – 18 x 1.00″ |
| 42 | 483014 | 3 | Cutter Blade, 14.75″ |
| 43 | 04043-06 | 3 | Washer, Flat 5/8 – .688 x 1.75 x .134 HD |
| 44 | 04030-07 | 3 | Lockwasher, 5/8 Spring |
| 45 | 04001-121 | 3 | Bolt, Hex Head 5/8 – 11x 1.50 |
| 46 | 461950 | 3 | Spindle Assembly |
| 47 | 43695 | 3 | Shaft, Spindle |
| 48 | 43694 | 3 | Protector, Bearing |
| 49 | 483303 | 6 | Bearing, Ball |
| 50 | 43696 | 3 | Spindle Housing |
| 51 | 43693 | 3 | Spacer, Bearing |
| 52 | 463436 | 1 | Idler Arm Assy. (incl. #20) |
48H, 52H & 61H CUTTER DECKS
| Part No. | Qty | Description | 48 | 52 | 61 | |
|---|---|---|---|---|---|---|
| 1 | 485350 | 1 | Belt, Cutter Deck – 48H | x | ||
| 485424 | 1 | Belt, Cutter Deck – 52H | x | |||
| 486027 | 1 | Belt, Cutter Deck – 61H | x | |||
| 2 | 424615 | 1 | Bracket, Belt Guide | x | x | x |
| 3 | 04021-09 | 4 | Nut, 3/8-16 x 16 Elastic Stop | x | x | x |
| 4 | 04043-04 | 6 | Flatwasher, 3/8-.391 x .938 x .105 | x | x | x |
| 5 | 424367 | 3 | Dust Shield | x | x | x |
| 6 | 04112-06 | 3 | Nut, 3/4-16 Spiral Lock | x | x | x |
| 7 | 04063-01 | 3 | Key, 1/4 x 1/4 x 1-1/4″ | x | x | x |
| 8 | 483422 | 3 | Pulley, 5″ Idler | x | x | x |
| 9 | 483323 | 3 | Pulley, 5.13″ OD – 25mm Bore | x | ||
| 483324 | 3 | Pulley, 5.73″ OD – 25mm Bore | x | |||
| 484026 | 3 | Pulley, 6.32″ OD – 25mm Bore | x | |||
| 10 | 426729 | 2 | Belt Cover, SZL | x | x | |
| 425260 | 2 | Belt Cover, SZL61H | x | |||
| 11 | 424479 | 1 | Brace, Pulley | x | x | x |
| 12 | 43711 | 2 | Spacer | x | x | x |
| 13 | 424548 | 1 | Support, Idler Pivot – 48H | x | ||
| 424547 | 1 | Support, Idler Pivot – 52H | x | |||
| 425264 | 1 | Support, Idler Pivot – 61H | x | |||
| 14 | 04021-22 | 12 | Nut, 5/16-18 Elastic Stop Grade 8 | x | x | x |
| 15 | 04030-03 | 12 | Lockwasher, 5/16″ | x | x | x |
| 16 | 483453-03 | 2 | Bearing, 1″ ID | x | x | x |
| 17 | 462037 | 1 | Idler Arm Assembly (incl. 16) | x | x | x |
| 18 | 04001-31 | 1 | Bolt, Hex Head 3/8-16 x 2-1/2″ | x | x | x |
| 19 | 43708 | 1 | Pivot, Idler | x | x | x |
| 20 | 483375 | 1 | Spring, Cutter Deck Idler | x | x | x |
| 21 | 04001-136 | 1 | Bolt, Hex Head 3/8-16 x 1-1/2″ Gr.8 | x | x | x |
| 22 | 04019-04 | 4 | Nut, 3/8-16 Serrated Flange | x | x | x |
| 23 | 04021-07 | 4 | Nut, 1/2-13 Elastic Stop | x | x | x |
| 24 | 48114-04 | 4 | Grease Fitting, 1/4-28 Self Tap | x | x | x |
| 25 | 462769 | 1 | Pusharm Assembly, LH (incl. 24) | x | x | x |
| 462770 | 1 | Pusharm Assembly, RH (incl. 24) | x | x | x | |
| 26 | 43985 | 2 | Spacer, Pusharm – Deck | x | x | x |
| 27 | 43986 | 2 | Spacer, Pusharm – Axle | x | x | x |
| 28 | 04040-07 | 2 | Flatwasher, 1/2-.531 x 1.062 x .095 | x | x | x |
| 29 | 04001-145 | 2 | Bolt, Hex Head 1/2-13 x 3-1/2″ | x | x | x |
| 30 | 04001-52 | 2 | Bolt, Hex Head 1/2-13 x 2-1/2″ | x | x | x |
| 31 | 04011-29 | 2 | Screw, 1/4-20 x .375″ | x | x | |
| 04013-05 | 4 | Screw, 3/8-16 x 3/4″ | x | |||
| 32 | 461950 | 3 | Spindle Assembly | x | x | x |
| 33 | 483304 | 1 | Debris Shield | x | x | x |
| Part No. | Qty | Description | 48 | 52 | 61 | |
| --- | --- | --- | --- | --- | --- | --- |
| 34 | 483303 | 2 | Bearing | x | x | x |
| 35 | 43693 | 1 | Spacer | x | x | x |
| 36 | 462014 | 1 | Spindle Housing (incl. 34, 35) | x | x | x |
| 37 | 43694 | 1 | Protector, Bearing | x | x | x |
| 38 | 43695 | 1 | Shaft, Spindle | x | x | x |
| 39 | 04001-121 | 3 | Bolt, Hex Head 5/8-11 x 1-1/2″ | x | x | x |
| 40 | 04030-07 | 3 | Lockwasher, 5/8″ | x | x | x |
| 41 | 04043-06 | 3 | Flatwasher, 5/8-.688 x 1.75 x .134 HD | x | x | x |
| 42 | 482877 | 3 | Cutter Blade, 16-1/2″ | x | ||
| 482878 | 3 | Cutter Blade, 18″ | x | |||
| 482879 | 3 | Cutter Blade, 21″ | x | |||
| 43 | 04001-175 | 12 | Bolt, Hex Head 5/16-18 x 1-1/2″ Gr.8 | x | x | x |
| 44 | 04003-26 | 1 | Bolt, Carriage 3/8-16 x 4″ | x | x | x |
| 45 | 481632 | 1 | Wheel, Anti-Scalp | x | x | x |
| 46 | 04017-27 | 2 | Bolt, Hex Head Serr. Flange 3/8-16 x 1″ | x | x | x |
| 47 | 04021-05 | 1 | Nut, 3/8-16 Center Lock | x | x | x |
| 48 | 427865 | 1 | Bracket, Anti-Scalp | x | x | x |
| 49 | 04001-77 | 3 | Bolt, Hex Head 3/8-16 x 3-1/2″ | x | x | x |
| 50 | 04041-38 | 2 | Flatwasher, 3/8-.406 x 2.250 x .188 | x | x | x |
| 51 | 451926 | 1 | Shaft Weldment, Guide Roller | x | x | x |
| 52 | 482295 | 2 | Wheel, Anti-Scalp | x | x | x |
| 53 | 04001-09 | 1 | Bolt, Hex Head 5/16-18 x 1″ | x | x | x |
| 54 | 04117-01 | 1 | Nut, 5/16-18 Flange Elastic Stop | x | x | x |
| 55 | 463334 | 1 | Cutter Deck w/Decals | x | ||
| 463335 | 1 | Cutter Deck w/Decals | x | |||
| 463336 | 1 | Cutter Deck w/Decals | x | |||
| 56 | 462031 | 1 | Discharge Chute | x | ||
| 462032 | 1 | Discharge Chute | x | |||
| 462213 | 1 | Discharge Chute | x | |||
| 57 | 482245 | 1 | Spring, Discharge Chute | x | x | x |
| 58 | 04021-10 | 3 | Nut, 5/16-18 Elastic Stop | x | x | x |
| 59 | 04001-154 | 1 | Bolt, Hex Head 5/16-18 x 4-3/4″ | x | x | x |
| 60 | 04001-12 | 2 | Bolt, Hex Head 5/16-18 x 1-3/4″ | x | x | x |
36H & 42H CUTTER DECK CONTROLS
| Ref. No. | Part No. | Qty | Description |
|---|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
| 428142
04117-02
04001-32
43086
04061-07
04040-07
04021-07
431072
452962
04041-08
04050-02
48114-04
428143
485351
431087
04117-04
44220
04001-183
427302
427303
04040-09
04021-09
462887
485718
| 1
4
4
4
4
6
4
4
2
2
2
4
1
1
6
6
6
4
2
1
4
1
1
1
| Link, Deck Lift – LH Nut, 3/8-16 Elastic Stop
Bolt, Hex Head 3/8-16 x 1-1/4″ Bushing
Cotter Pin, 3/16 x 1″
Flatwasher, 1/2-.531 x 1.062 x .095 Nut, 1/2-13 Elastic Stop
Joint, Swivel
Lift Bellcrank Weldment
Flatwasher, 3/4-.769 x 1.250 x .0598 Retaining Ring, .750 “E”
Grease Fitting, 1/4-28 Self Tap Link, Deck Lift – RH
Pin Assembly, Deck Height Bushing, Deck latch
Nut, 1/2-13 Elastic Stop Rod, Deck lift
Bolt, Hex Head 1/2-13 x 1-3/4 Pull Arm, Deck
Lateral Link
Flatwasher, 5/18 – .656 x 1.312 x .095 Nut, 3/8-16 Elastic Stop
Lever Assembly (incl. Grip) Grip
48H, 52H & 61H CUTTER DECK CONTROLS
| Ref. No. | Part No. | Qty | Description |
|---|---|---|---|
| 1 | 428142 | 1 | Link, Deck Lift – LH |
| 2 | 04117-02 | 4 | Nut, 3/8-16 Elastic Stop |
| 3 | 04001-32 | 4 | Bolt, Hex Head 3/8-16 x 1-1/4″ |
| 4 | 43086 | 4 | Bushing |
| 5 | 04061-07 | 4 | Cotter Pin, 3/16 x 1″ |
| 6 | 04040-07 | 2 | Flatwasher, 1/2-.531 x 1.062 x .095 |
| 7 | 04021-07 | 6 | Nut, 1/2-13 Elastic Stop |
| 8 | 431072 | 4 | Joint, Swivel |
| 9 | 452962 | 2 | Lift Bellcrank Weldment |
| 10 | 04041-08 | 2 | Flatwasher, 3/4-.769 x 1.250 x .0598 |
| 11 | 04050-02 | 2 | Retaining Ring, .750 “E” |
| 12 | 48114-04 | 8 | Grease Fitting, 1/4-28 Self Tap |
| 13 | 428143 | 1 | Link, Deck Lift – RH |
| 14 | 485351 | 1 | Pin Assembly, Deck Height |
| 15 | 43986 | 2 | Spacer, Pusham – Axle |
| 16 | 462769 | 1 | Pusharm Assembly, LH (incl. 12) |
| 17 | 462770 | 1 | Pusharm Assembly, RH (incl. 12) |
| 18 | 43985 | 2 | Spacer, Pusharm – Deck |
| 19 | 424489 | 2 | Bracket, Pusharm |
| 20 | 04001-145 | 2 | Bolt, Hex Head 1/2-13 x 3-1/2″ |
| 21 | 04001-52 | 2 | Bolt, Hex Head 1/2-13 x 2-1/2″ |
| 22 | 04001-49 | 8 | Bolt, Hex Head 5/16-18 x 3″ |
| 23 | 04021-10 | 8 | Nut, 5/16-18 Elastic Stop |
| 24 | 44220 | 4 | Rod, Deck Lift |
| 25 | 04040-09 | 4 | Washer, Flat, 5/8 – .656 x 1.312 x .095 |
| 26 | 04021-19 | 2 | Nut, 1/2-13 Center Lock |
| 27 | 462887 | 1 | Lever Assembly (incl. Grip) |
| 485718 | 1 | Grip | |
| 28 | 04021-09 | 1 | Nut, 3/8-16 E;astic Stop |
36H & 42H SHEET METAL COMPONENTS
| Ref. No. | Part No. | Qty | Description |
|---|---|---|---|
| 1 | 486499 | 1 | Seat, SZL |
| 2 | 483559 | 1 | Cable, Seat Stop |
| 3 | 04001-59 | 2 | Bolt, Hex Head 1/4-20 x 1-1/4″ |
| 4 | 04019-02 | 4 | Nut, 1/4-20 Serrated Flange |
| 5 | 463384 | 1 | Seat-Plate W/Decal |
| 6 | 04117-02 | 2 | Nut, Flanged Elastic Stop, 3/8-16 |
| 7 | 04001-09 | 4 | Bolt, Hex Head 5/16-18 x 1″ |
| 8 | 04030-03 | 4 | Lockwasher, 5/16″ |
| 9 | 04040-15 | 4 | Flatwasher, 5/16-.375 x .875 x .083 |
| 10 | 04001-19 | 10 | Bolt, Hex Head 3/8-16 x 1″ |
| 11 | 04041-07 | 2 | Flatwasher, 3/8-.391 x .938 x .105 |
| 12 | 483372 | 2 | Spring, Seat |
| 13 | 427341 | 1 | Seat Stop |
| 14 | 04003-12 | 2 | Bolt, Carriage 5/16-18 x 3/4″ |
| 15 | 04001-18 | 4 | Bolt, Hex Head 3/8-16 x 3/4″ |
| 16 | 04117-01 | 2 | Nut, 5/16-18 Elastic Stop |
| 17 | 427961 | 1 | Plate, Anti-Rotation |
| 18 | 428187 | 1 | Plate, Spacer |
| 19 | 04019-04 | 6 | Nut, 3/8-16 Serrated Flange |
| 20 | 428131 | 1 | Skid Plate, SZL-36 |
| 21 | 426727 | 2 | Bracket, Switch |
| 22 | 04117-03 | 4 | Nut, 1/4-20 Flange Elastic Stop |
| 23 | 04003-02 | 4 | Bolt, Carriage 1/4-20 x 3/4″ |
| 24 | 04132-01 | 2 | Threaded Insert, 3/8-16 |
| 25 | 04132-01 | 3 | Threaded Insert, 3/8-16 |
| 26 | 481284 | 1 | Bumper, Rubber |
| 27 | 428183 | 1 | Battery Hold Down |
| 28 | 428186 | 1 | Battery Box |
| 29 | 463349 | 1 | Frame Assembly, SZL-36H & SZL42H |
| 30 | 485207 | 2 | Caster Wheel Assembly (incl. 31, 32, 33, 34) |
| 31 | 485243 | 4 | Bearing |
| 32 | 43974 | 2 | Spacer, Wheel Bearings |
| 33 | 483417 | 2 | Tire, 11 x 4 x 5 |
| 34 | 485242 | 2 | Rim Assembly (incl. 31, 32) |
| 35 | 04021-07 | 2 | Nut, 1/2-13 Elastic Stop |
| 36 | 04001-80 | 2 | Bolt, Hex Head 1/2-13 x 6-1/2″ |
| 37 | 463183 | 2 | Caster Assembly (INCL 30,35,36) |
| 453060 | 2 | Yoke Weldment, Caster | |
| 38 | 424636 | 2 | Spacer, Yoke |
| 39 | 483466 | 4 | Bearing |
| 40 | 04041-38 | 2 | Flatwasher, 3/8-.406 x 2.25 x .188 |
| 41 | 04030-04 | 8 | Lockwasher, 3/8″ |
| 42 | 04040-11 | 2 | Flatwasher, 7/16-.500 x 1.25 x .83 |
| 43 | 43736 | 2 | Spacer, Caster Bearing |
| 44 | 428141 | 1 | Plate, Backing |
| 45 | 427875 | 1 | Plate, Decal |
| 46 | 427868 | 1 | Bumper, Front |
| 47 | 04090-03 | 6 | Pop, Rivet 3/16 x .402 |
| 48 | 04011-29 | 4 | Screw, 1/4-20 x .375 Shakeproof |
48H, 52H & 61H SHEET METAL COMPONENTS
| Part No. | Qty | Description | |
|---|---|---|---|
| 1 | 486602 | 1 | Seat, SZL w/Armrests Armrest, RH (48H, 52H, 61H) Armrest, LH |
(48H, 52H, 61H)
Cable, Seat Stop
Bolt, Hex Head 1/4-20 x 1-1/4″ Nut, 1/4-20 Serrated Flange Seat Plate w/Decal
Bolt, Hex Head 3/8-16 x 1″ Bolt, Hex Head 5/16-18 x 1″ Lockwasher, 5/16″
Flatwasher, 5/16-.375 x .875 x .083
Flatwasher, 3/8-.391 x .938 x .105
Spring, Seat
Bolt, Hex Head 5/16-18 x 3/4″ Serrated Flange
Channel, Hose Battery Hold Down
Nut, 5/16-18 Flange Elastic Stop Bolt, Hex Head 3/8-16 x 3/4″ Bolt, Carriage 5/16-18 x 3/4″ Nut, 3/8-16 Elastic Stop
Nut, 5/16-18 Flange Elastic Stop Bracket, Switch
Nut, 1/4-20 Flange Elastic Stop Plate, Anti-Rotation
Plate, Anti-Rotation – Warner (SZL-48) Plate, Spacer
Screw, #10-32 x .56 Guard, Belt – LH
Nut, 3/8-16 Serrated Flange Skid Plate, SZL
Mainframe w/Decals – SZL48H/52H Mainframe w/Decals – SZL61H Caster Assembly (INCL 30,31,36) Yoke Weldment, Caster
Nut, 1/2-13 Elastic Stop
| 486633| 1
| 486634| 1
2| 483559| 1
3| 04001-59| 2
4| 04019-02| 4
5| 463384| 1
6| 04001-19| 8
7| 04001-09| 4
8| 04030-03| 4
9| 04040-15| 4
10| 04041-07| 2
11| 483372| 2
12| 04017-16| 2
13| 426768| 1
14| 428184| 1
15| 04117-01| 2
16| 04001-18| 4
17| 04003-12| 4
18| 04021-09| 2
19| 04117-01| 2
20| 426727| 2
21| 04117-03| 4
22| 427961
428752
| 1
1
23| 428187| 1
24| 04011-11| 6
25| 426767| 1
26| 04019-04| 6
27| 428132| 1
28| 463421
463422
| 1
1
29| 463184
453010
| 2
2
30| 04021-07| 2
| Part No.| Qty| Description
---|---|---|---
31| 485939| 2| Caster Wheel Assembly (incl. 32, 33,
| | | 34, 35)
32| 485243| 4| Bearing
33| 431052| 1| Spacer, Wheel Bearing
34| 485941| 1| Tire, 11 x 6 x 5
35| 485940| 1| Rim Assembly (incl. 32, 33)
36| 04001-134| 2| Bolt, Hex Head 1/2-13 x 6-1/2″
37| 483466| 4| Bearing
38| 424636| 2| Spacer, Yoke
39| 04003-02| 4| Bolt, Carriage 1/4-20 x 3/4″
40| 04117-02| 2| Nut, 3/8-16 Flange Elastic Stop
41| 04041-38| 2| Flatwasher, 3/8-.406 x 2.25 x .188
42| 04030-04| 2| Lockwasher, 3/8″
43| 426785| 1| Guard, Belt – RH
44| 04024-03| 2| U-Nut, 5/16 Push-On
45| 04019-03| 2| Nut, 5/16-18 Serrated Flange
46| 04040-11| 2| Flatwasher, 7/16-.500 x 1.25 x .83
47| 427868| 1| Bumper, Front
48| 04090-03| 4| Rivet, 3/16 x .402
49| 427875| 1| Plate, Decal
50| 04011-29| 4| Screw, 1/4-20 x .375
51| 43736| 2| Spacer, Caster Bearing
52| 428141| 1| Plate, Backing
53| 486633| 1| Armrest, SZL LH
| 486634| | Armrest, SZL RH
54| 04110-06| 6| U-nut, 1/4-14
55| 04011-32| 6| Screw, Self Tapping 1/4-14 x 1″
56| 04003-12| 7| Bolt, Carriage 5/16-18 x 3/4″
57| 453255| 1| Mounting Weldment, Axle – Tuff Torq
| 453454| 1| Mounting Weldment, Axle – Hydro-Gear
36H & 42H DRIVE SYSTEM COMPONENTS – HYDRO-GEAR AXLES
| Part No. | Qty | Description | |
|---|---|---|---|
| 1 | *485192 | 1 | Engine, Kawasaki – FR600V (INCL. 3,4,5) |
| *487153 | 1 | Engine, Briggs & Stratton PXi2000 | |
| *487203 | 1 | Engine, Briggs & Stratton PXi2200 | |
| *485219 | 1 | Engine, Kawasaki – FR651V (INCL. 3,4,5) | |
| 2 | * | 1 | Oil Drain, Kawasaki |
| 3 | 484210 | 2 | Gasket, Exhaust |
| 4 | 04025-04 | 4 | Nut, M8 x 1.25 Hex Special |
| 5 | 04033-01 | 4 | Lockwasher, M8 Metric Spring |
| 6 | 485193 | 1 | Muffler, Kawasaki FR600V |
| 487151 | 1 | Muffler, Briggs & Stratton PXi | |
| 485225 | 1 | Muffler, Kawasaki FR651V | |
| 7 | 04030-03 | 2 | Washer, Lock 5/16 Spring |
| 8 | 04117-01 | 4 | Nut, 5/16-18 Flanged Elastic Stop |
| 9 | 04001-04 | 2 | Bolt, Hex Head, 1/4-20 x 1½” |
| 10 | 04030-04 |
04031-03
| 4
1
| Washer, Lock 3/8 Spring
Washer, Lock 5/16 Ext Tooth (ground)
11| 431073| 1| Spacer, Idler Arm
12| 04117-02| 1| Nut, 3/8-16 Flange Elastic Stop
13| 483600| 1| Spring, Brake Return
14| 04003-02| 2| Bolt, Carriage 1/4-20 x 3/4″
15| 04001-32| 4| Bolt, Hex Head 3/8-16 x 1¼”
16| 04021-10| 14| Nut, 5/16-18 Elastic Stop
17| 452847| 1| Shaft Weldment, Control Arm
18| 04001-06| 1| Bolt, Hex Head 1/4-20 x 5/8″
19| 04063-01| 1| Key, 1/4 x 1/4 x 1-1/4″
20| 485956| 1| Pulley, 4-1/2″ – 1″ Bore
21| 462715| 1| Clutch, GT1- 1″ Bore
22| 04041-28| 1| Flatwasher, 7/16-.496 x 1.75 x .25
23| 04030-05| 1| Lockwasher, 7/16″
24| 04102-12| 1| Bolt, 7/16-20 x 3-1/4″ w/Patch
25| 427283| 2| Lever, Dump Valve
26| 04062-02| 4| Hair Pin Cotter, .080 x 1.19
27| 04021-05| 1| Nut, 3/8-16 Center Lock
28| 485801
485802
| 2
2
| Wheel Assembly, 20 x 8.0-10 (36H)
Rim W/Valve Stem 10 x 5.0 (36H)
| 485803| 2| Tire, 20 x 8.0-10 (36H)
| 485948| 2| Wheel Assembly, 20 x 10-10 (42H)
| 485949| 2| Rim W/Valve Stem 10 x 7.0 (42H)
| 485950| 2| Tire, 20 x 10-10 (42H)
29| 04001-136| 1| Bolt, Hex Head 3/8-16 x 1-1/2″
30| 04132-01| 8| Threaded insert, Hex Head (Pressed)
31| 04028-02| 8| Wheel Nut, 1/2-20 x 13/16
32| 04001-13| 8| Bolt, Hex Head 3/8-16 x 1-1/2″
33| 486787| 1| Transaxle, LH- ZT-2800
34| 486788| 1| Transaxle, RH- ZT2800
35| 483112| 1| Spring, Transmission Drive
36| 04069-01| 4| Pin, Rue Cotter – 3/8″
37| 431039| 1| Spacer, Axle
38| 04001-39| 4| Bolt, Hex Head 5/16-18 x 2-1/4
39| 04040-15| 4| Flatwasher, 5/16-.375 x .875 x .083
40| 44225| 2| Rod, Brake
41| 43876| 2| Joint, Swivel
42| 04001-46| 2| Bolt, Hex Head 1/4-20 x 1-1/2
43| 04030-04| 6| Lockwasher, 3/8″
44| 04041-07| 7| Flatwasher, 3/8-.391 x .938 x .105
45| 04021-08| 5| Nut, 1/4-20 Elastic Stop Nut
| Part No.| Qty| Description
---|---|---|---
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
| 485808
04001-51
04043-04
486045
04001-54
431049
48224
463017
43720
04019-04
04001-11
04117-02
463186
482102
483453-05
43969
04001-31
44231
04107-08
485794
04001-10
04001-12
04001-02
04001-19
463163
485835
462941
04001-17
43833
484193
463023
483538
04021-09
| 1
1
2
1
1
2
2
1
1
4
1
1
1
1
8
1
1
1
2
2
2
2
2
4
2
2
2
4
4
2
1
1
2
| Belt, Transmission SZL-36/42 Bolt, Hex Head 3/8-16 x 3-3/4″ Flatwasher, 3/8-.391 x .938 x .105 Pulley, 3-1/2″ Idler
Bolt, Hex Head 3/8-16 x 3″ Pivot Idler
Bearing
Idler Arm Assembly (incl. 52, 83) Spacer, Idler Arm
Nut, 3/8-16 Serrated Flange Bolt, Hex Head 5/16-18
Nut, 3/8-16 Flange Elastic Stop Brake Lever Assembly (INCL 59,60) Grip, Brake Handle
Bearing
Pivot, Brake Lever
Bolt, Hex Head 3/8-16 x 2-1/2″ Rod, Upper Brake Linkage Bolt, Hex Head 3/8-16 x 3.0 Linkage Assembly, Steering Bolt, Hex Head 5/16-18 x 1-1/4
Bolt, Hex Head 5/16-18 x 1-3/4″ Bolt, Hex Head 1/4-20 x 1-3/4″ Bolt, Hex Head 3/8-16 x 1″ Handlebar W/ Grip, SZL-36 Lever, Control Arm
Control Arm Weldment, SZL-36 (INCL 60) Bolt, Hex Head 5/16-18 x 1-1/2″
Spacer, Pump Dampener Dampener
Bellcrank Assembly, Brake (INCL 60) Spring, Brake
Nut, 3/8-16 x 16 Elastic Stop
48H, 52H & 61H DRIVE SYSTEM COMPONENTS – TUFF TORQ AXLES
| Part No. | Qty | Description | |
|---|---|---|---|
| 1 | *485219 | 1 | Engine, Kawasaki – FR651V |
| *487203 | 1 | Engine, Briggs & Stratton PXi2200 | |
| 487171 | 1 | Engine, Scag LC2P77F | |
| *485971 | 1 | Engine, Kohler – 22KT | |
| *485972 | 1 | Engine, Kohler – 24KT | |
| *487204 | 1 | Engine, Briggs & Stratton PXi2400 | |
| *485220 | 1 | Engine, Kawasaki – FR691V | |
| *487205 | 1 | Engine, Briggs & Stratton PXi2500 | |
| *486809 | 1 | Engine, Kawasaki – FR730V | |
| *486021 | 1 | Engine, Kohler – 26KT | |
| 487173 | 1 | Engine, Scag LC2P82F | |
| 2 | 2 | Gasket, Exhaust | |
| 3 | 485225 | 1 | Muffler, Kawasaki FR651V |
| 487151 | 1 | Muffler, Briggs & Stratton PXi | |
| 487170 | 1 | Muffler, Scag LC2P77F/82F | |
| 485336 | 1 | Muffler, Kohler | |
| 4 | * | 1 | Oil Drain, Kawasaki |
| 482510 | 1 | Oil Drain, Hose Assy. | |
| 5 | 04025-04 | 4 | Nut, M8-1.25 Hex Flange |
| 6 | 43674 | 1 | Spacer |
| 7 | 483112 | 1 | Spring, Transmission Drive |
| 8 | 04021-05 | 2 | Nut, 3/8-16 Center Lock |
| 9 | 04117-02 | 2 | Nut, 3/8-16 Flange Elastic Stop |
| 10 | 483600 | 1 | Spring, Brake Return |
| 11 | 431073 | 1 | Spacer, Idler Arm |
| 12 | 04001-46 | 2 | Bolt, 3/8-16 x 2¼” |
| 13 | 04003-02 | 2 | Bolt, Carriage 1/4-20 x 3/4″ |
| 14 | 04021-10 | 18 | Nut, 5/16-18 Elastic Stop |
| 15 | 04001-32 | 4 | Bolt, 3/8-16 x 1-1/4″ |
| 16 | 452620 | 1 | Shaft Weldment, Control Arm |
| 17 | 04001-06 | 1 | Bolt, Hex Head 1/4-20 x 5/8″ |
| 18 | 04021-08 | 3 | Nut, 1/4-20 Elastic Stop |
| 19 | 04063-01 | 1 | Key, 1/4 x 1/4 x 1-1/4″ (48H, 52H) |
| 04063-42 | 1 | Key, 1/4 x 1/4 x 3″ (61H) | |
| 20 | 487032 | 1 | Pulley, 4-1/2″ – 1″ Bore |
| 487394 | 1 | Pulley, 4-1/4″ – 1-1/8″ Bore (61H) | |
| 21 | 487077 | 1 | Clutch |
| 462228 | 1 | Clutch, GT2 (61H) | |
| 22 | 04030-05 | 1 | Flatwasher, 7/16-.496 x 1.75 x .25 |
| 23 | 04102-12 | 1 | Lockwasher, 7/16″ |
| 24 | 04102-12 | 1 | Bolt, 7/16-20 x 3 1/4″ w/Patch |
| 04102-03 | 1 | Bolt, 7/16-20 x 2 1/4″ w/Patch (61H) | |
| 25 | 04117-01 | 12 | Nut, 5/16-18 Flange Elastic Stop |
| 26 | 04001-39 | 1 | Bolt, Hex Head 5/16-18 x 2-1/4″ |
| 27 | 04030-04 | 4 | Washer, Lock 3/8 Spring |
| 04031-03 | 1 | Washer, Lock 5/16 Ext Tooth (ground) | |
| 28 | 483390 | 2 | Wheel Assembly |
| 481868 | 1 | Rim w/Valve Stem | |
| 483389 | 1 | Tire, 20 x 10-8 | |
| 485948 | 1 | Wheel Assembly (61H) | |
| 485949 | 1 | Rim w/Valve Stem (61H) | |
| 485948 | 1 | Tire, 20 x 10-10 (61H) | |
| Part No. | Qty | Description | |
| --- | --- | --- | --- |
| 29 | 04028-02 | 8 | Wheel Nut, 1/2-20 x 13/16 |
| 30 | 04001-49 | 8 | Bolt, Hex Head 5/16-18 x 3″ |
| 31 | 428348 | 2 | Bracket, Pusharm |
| 32 | 486650 | 1 | Transaxle – Tuff Torq, LH – SZL |
| 33 | 486651 | 1 | Transaxle – Tuff Torq, RH – SZL |
| 34 | 428891 | 1 | Stiffener, Axle |
| 35 | 04001-39 | 4 | Bolt, Hex Head 5/16-18 x 2-1/4″ |
| 36 | 04040-15 | 6 | Flatwasher, 5/16-.375 x .875 x .083 |
| 37 | 44244 | 1 | Rod, Brake – LH |
| 44245 | 1 | Rod, Brake – RH | |
| 38 | 43876 | 2 | Joint, Swivel |
| 39 | 04069-01 | 4 | Pin, Rue Cotter – 3/8″ |
| 40 | 04001-39 | 1 | Bolt, Hex Head 5/16-18 x 2-1/4″ |
| 41 | 04001-21 | 2 | Bolt, Hex Head 3/8-16 x 1-3/4″ |
| 42 | 463187 | 1 | Brake Lever Assembly (incl. 43, 44) |
| 43 | 482102 | 1 | Grip, Brake Handle |
| 44 | 483453-05 | 8 | Bearing |
| 45 | 43969 | 1 | Pivot, Brake Lever |
| 46 | 04001-31 | 1 | Bolt, Hex Head 3/8-16 x 2-1/2″ |
| 47 | 44231 | 1 | Rod, Upper Brake Linkage |
| 48 | 486649 | 1 | Belt, Tuff Torq Transmission-SZL |
| 49 | 04001-51 | 1 | Bolt, Hex Head 3/8-16 x 3-3/4″ |
| 50 | 04043-04 | 3 | Flatwasher, 3/8-.391 x .938 x .105 HD |
| 51 | 486045 | 1 | Pulley, 3-1/2″ Idler |
| 52 | 04001-54 | 1 | Bolt, Hex Head 3/8-16 x 3″ |
| 53 | 431049 | 2 | Pivot Idler |
| 54 | 463017 | 1 | Idler Arm Assembly (incl. 55, 84) |
| 55 | 48224 | 2 | Bearing |
| 56 | 43720 | 1 | Spacer, Pump Idler |
| 57 | 04001-45 | 1 | Bolt, Hex Head 3/816 x 2″ |
| 58 | 04019-04 | 2 | Nut, 3/8-16 Serrated Flange |
| 59 | 04019-02 | 4 | Nut, 1/4-20 Serrated Flange |
| 60 | 453255 | 1 | Mounting Weldment, Tuff Torq Axle – Front |
| 61 | 04107-05 | 2 | Bolt, Hex Head 3/8-16 x 2-1/2″ Special Lock |
| 62 | 04110-04 | 2 | U-Nut, 3/8-16 |
| 63 | 04021-09 | 6 | Nut, 3/8-16 Elastic Stop |
| 64 | 486691 | 2 | Linkage, Pump |
| 65 | 04001-32 | 8 | Bolt, Hex Head 3/8-16 x 1-1/4″ |
| 66 | 462797 | 2 | Control Arm Assembly (incl. 44) |
| 67 | 463019 | 1 | Bellcrank Assembly (incl. 44) |
| 68 | 04001-02 | 2 | Bolt, Hex Head 1/4-20 x 1-3/4″ |
| 69 | 04001-12 | 2 | Bolt, Hex Head 5/16-18 x 1-3/4″ |
| 70 | 422372 | 2 | Bar, Control Lever |
| 71 | 462740 | 1 | Handlebar w/Grip |
| 484376 | 1 | Grip, Control Lever | |
| 72 | 462741 | 1 | Handlebar w/Grip |
| 484376 | 1 | Grip, Control Lever | |
| 73 | 483538 | 1 | Spring, Brake |
| 74 | 484193 | 2 | Dampener, Steering |
| 75 | 43602 | 4 | Spacer, Damper |
| 76 | 04001-11 | 4 | Bolt, Hex Head 5/16-18 |
Available through individual engine manufacturer.
Serial Number Range for SZL-61H models produced with Tuff Torq TZ-450 Axles:
SZL-61H-24FR| with a serial number of| X1600001 to X1799999
SZL-61H-25PX| with a serial number of| X1800001 to X1999999
SZL-61H-26KT| with a serial number of| X2000001 to X2199999
SZL-61H-27SR| with a serial number of| X2200001 to X2399999
Always use the entire serial number listed on the serial number tag when
referring to this product.
61H DRIVE SYSTEM COMPONENTS – HYDRO-GEAR AXLES
| Part No. | Qty | Description | |
|---|---|---|---|
| 1 | *487205 | 1 | Engine, Briggs & Stratton PXi2500 |
| *486809 | 1 | Engine, Kawasaki – FR730V | |
| *486021 | 1 | Engine, Kohler – 26KT | |
| 487173 | 1 | Engine,Scag LC2P82F | |
| 2 | * | 2 | Gasket, Exhaust |
| 3 | 485225 | 1 | Muffler, Kawasaki FR |
| 485336 | 1 | Muffler, Kohler | |
| 487151 | 1 | Muffler, Briggs & Stratton PXi | |
| 487170 | 1 | Muffler, Scag LC2P77F/82F | |
| 4 | * | 1 | Oil Drain, Kawasaki |
| 482510 | 1 | Oil Drain, Hose Assy. | |
| 5 | 04025-04 | 4 | Nut, M8-1.25 Hex Flange |
| 6 | 43674 | 1 | Spacer |
| 7 | 483112 | 1 | Spring, Transmission Drive |
| 8 | 04021-05 | 2 | Nut, 3/8-16 Center Lock |
| 9 | 04117-02 | 2 | Nut, 3/8-16 Flange Elastic Stop |
| 10 | 483600 | 1 | Spring, Brake Return |
| 11 | 431073 | 1 | Spacer, Idler Arm |
| 12 | 04001-46 | 2 | Bolt, 3/8-16 x 2¼” |
| 13 | 04003-02 | 2 | Bolt, Carriage 1/4-20 x 3/4″ |
| 14 | 04021-10 | 18 | Nut, 5/16-18 Elastic Stop |
| 15 | 04001-32 | 4 | Bolt, 3/8-16 x 1-1/4″ |
| 16 | 452620 | 1 | Shaft Weldment, Control Arm |
| 17 | 04001-06 | 1 | Bolt, Hex Head 1/4-20 x 5/8″ |
| 18 | 04021-08 | 3 | Nut, 1/4-20 Elastic Stop |
| 19 | 04063-42 | 1 | Key, 1/4 x 1/4 x 3″ (SZL-61) |
| 20 | 486326 | 1 | Pulley, 4-1/2″ – 1.125″ Bore (SZL-61) |
| 21 | 462228 | 1 | Clutch, GT2 (SZL-61) |
| 22 | 04041-28 | 1 | Flatwasher, 7/16-.496 x 1.75 x .25 |
| 23 | 04030-05 | 1 | Lockwasher, 7/16″ |
| 24 | 04102-12 | 1 | Bolt, 7/16-20 x 2 1/4″ w/ Patch (SZL-61) |
| 25 | 426592 | 2 | Lever, Dump Valve |
| 26 | 04062-02 | 5 | Hair Pin Cotter, .080 x 1.19 |
| 27 | 04030-04 | 4 | Washer, Lock 3/8 Spring |
| 04031-03 | 1 | Washer, Lock 5/16 Ext Tooth (ground) | |
| 28 | 485948 | 2 | Wheel Assembly (SZL-61) |
| 485949 | 1 | Rim w/Valve Stem (SZL-61) | |
| 485948 | 1 | Tire, 20 x 10-10 (SZL-61) | |
| 29 | 04028-02 | 8 | Wheel Nut, 1/2-20 x 13/16 |
| 30 | 04001-49 | 8 | Bolt, Hex Head 5/16-18 x 3″ |
| 31 | 424489 | 2 | Bracket, Pusharm |
| 32 | 486791 | 1 | Transaxle, LH – SZL-61 |
| 33 | 486792 | 1 | Transaxle, RH – SZL-61 |
| 34 | 43984 | 1 | Spacer |
| 35 | 04001-39 | 4 | Bolt, Hex Head 5/16-18 x 2-1/4″ |
| 36 | 04040-15 | 6 | Flatwasher, 5/16-.375 x .875 x .083 |
| 37 | 44218 | 2 | Rod, Brake |
| 38 | 43876 | 2 | Joint, Swivel |
| Part No. | Qty | Description | |
| --- | --- | --- | --- |
| 39 | 04069-01 | 4 | Pin, Rue Cotter – 3/8″ |
| 40 | 04041-07 | 7 | Flatwasher, 3/8-.391 x .938 x .105 |
| 41 | 04030-04 | 6 | Lockwasher, 3/8″ |
| 42 | 463187 | 1 | Brake Lever Assembly (incl. 43, 44) |
| 43 | 482102 | 1 | Grip, Brake Handle |
| 44 | 483453-05 | 8 | Bearing |
| 45 | 43969 | 1 | Pivot, Brake Lever |
| 46 | 04001-31 | 1 | Bolt, Hex Head 3/8-16 x 2-1/2″ |
| 47 | 44219 | 1 | Rod, Upper Brake Linkage |
| 48 | 485349 | 1 | Belt, Transmission-SZL |
| 49 | 04001-51 | 1 | Bolt, Hex Head 3/8-16 x 3-3/4″ |
| 50 | 04043-04 | 3 | Flatwasher, 3/8-.391 x .938 x .105 HD |
| 51 | 486045 | 1 | Pulley, 3-1/2″ Idler |
| 52 | 04001-54 | 1 | Bolt, Hex Head 3/8-16 x 3″ |
| 53 | 431049 | 2 | Pivot Idler |
| 54 | 463017 | 1 | Idler Arm Assembly (incl. 55, 84) |
| 55 | 48224 | 2 | Bearing |
| 56 | 43720 | 1 | Spacer, Pump Idler |
| 57 | 04001-45 | 1 | Bolt, Hex Head 3/816 x 2″ |
| 58 | 04019-04 | 2 | Nut, 3/8-16 Serrated Flange |
| 59 | 04001-14 | 1 | Bolt, Hex Head 1/4-20 x 1″ |
| 60 | 04019-02 | 1 | Nut, 1/4-20 Serrated Flange |
| 61 | 04107-05 | 2 | Bolt, Hex Head 3/8-16 x 2-1/2″ Special Lock |
| 62 | 04110-04 | 2 | U-Nut, 3/8-16 |
| 63 | 04021-09 | 6 | Nut, 3/8-16 Elastic Stop |
| 64 | 485312 | 2 | Linkage, Pump |
| 65 | 04001-32 | 8 | Bolt, Hex Head 3/8-16 x 1-1/4″ |
| 04001-21 | 4 | Bolt, Hex Head 3/8-16 x 1-3/4″(used when | |
| armrests are installed) | |||
| 66 | 462797 | 2 | Control Arm Assembly (incl. 44) |
| 67 | 463019 | 1 | Bellcrank Assembly (incl. 44) |
| 68 | 04001-02 | 2 | Bolt, Hex Head 1/4-20 x 1-3/4″ |
| 69 | 04001-12 | 2 | Bolt, Hex Head 5/16-18 x 1-3/4″ |
| 70 | 422372 | 2 | Bar, Control Lever |
| 71 | 462740 | 1 | Handlebar w/Grip |
| 484376 | 1 | Grip, Control Lever | |
| 72 | 462741 | 1 | Handlebar w/Grip |
| 484376 | 1 | Grip, Control Lever | |
| 73 | 483538 | 1 | Spring, Brake |
| 74 | 484193 | 2 | Dampener, Steering |
| 75 | 43602 | 4 | Spacer, Damper |
| 76 | 04001-11 | 4 | Bolt, Hex Head 5/16-18 |
| 77 | 453454 | 1 | Mounting Weldment, Axle – Hydro-Gear |
Available through individual engine manufacturers.
Serial Number Range for SZL-61H models produced with produced with Hydro-Gear ZT-3100 Axles:
SZL-61H-24FR| with a serial number of| X1600001 to X1799999
SZL-61H-25PX| with a serial number of| X1800001 to X1999999
SZL-61H-26KT| with a serial number of| X2000001 to X2199999
SZL-61H-27SR| with a serial number of| X2200001 to X2399999
Always use the entire serial number listed on the serial number tag when
referring to this product.
36 & 42 ELECTRICAL SYSTEM
| Ref. No. | Part No. | Qty | Description |
|---|---|---|---|
| 1 | 483642 | 1 | Double Fuse Assembly (incl. 2, 3, 4, 5) |
| 2 | 482588 | 2 | Clip, Wire |
| 3 | 483571 | 1 | Cover, Double |
| 4 | 48298 | 2 | Fuse, 20 Amp |
| 5 | 483629 | 2 | Fuse Holder |
| 6 | 48126 | 4 | Rubber Boot |
| 7 | 04020-02 | 2 | Nut, 1/4-20 UNC |
| 8 | 48029-14 | 1 | Battery Cable, Black 31.50 |
| 9 | 04001-08 | 4 | Bolt, Hex Head 5/16-18 x 3/4″ |
| 10 | 04019-03 | 1 | Nut, 5/16-18 Serrated Flange |
| 11 | 428183 | 1 | Battery Hold Down |
| 12 | 481284 | 1 | Bumper, Rubber |
| 13 | 04001-44 | 6 | Bolt, Hex Head 1/4-20 x 1/2″ |
| 14 | 485212* | 1 | Battery, 12v – 230CCA |
| 15 | 483278 | 1 | Solenoid, Sealed |
| 16 | 04011-14 | 2 | Screw, Self-Tapping 1/4-20 x 3/4 |
| 17 | 48029-29 | 2 | Battery Cable, Red 18.0 w/Braid |
| 18 | 04031-03 | 1 | Lockwasher, 5/16″ Ext. |
| 19 | 04002-06 | 1 | Bolt, Hex Head M8 x 1-1/4 x 16 |
| 20 | 483529 | 1 | Wire Harness Adapter, Kawasaki |
| 21 | 04001-32 | 4 | Bolt, Hex Head 3/8-16 x 1¼” |
| 22 | 04117-01 | 2 | Nut, 5/16-18 Flange Elastic Stop |
| 23 | 427961 | 1 | Plate, Anti-Rotation |
| 24 | 04041-28 | 1 | Flatwasher, 7/16-.496 x 1.75 x .25 |
| 25 | 04030-05 | 1 | Lockwasher, 7/16″ |
| 26 | 04102-12 | 1 | Bolt, 7/16-20 x 3¼” w/Patch |
| 27 | 483958 | 1 | Diode, 600V 6 Amp |
| 28 | 485956 | 1 | Pulley, 4-1/2″ – 1″ Bore |
| 29 | 04063-01 | 1 | Key, 1/4 x 1/4 x 1-1/4″ |
| 30 | 04117-03 | 4 | Nut, 1/4-20 Flange Elastic Stop |
| 31 | 426727 | 2 | Bracket, Switch |
| 32 | 04003-12 | 2 | Bolt, Carriage 5/16-18 x 3/4″ |
| 33 | 486518 | 1 | Wire Harness |
| 34 | 04030-03 | 4 | Lockwasher, 5/16″ |
| 35 | 04040-15 | 4 | Flatwasher, 5/16-.375 x .875 x .083 |
| 36 | 483474 | 1 | Switch, Double Pole – Twist |
| 37 | 483473 | 3 | Switch, Double Pole – Plunger |
| 38 | 04003-02 | 4 | Bolt, Carriage 1/4-20 x 3/4″ |
| 39 | 463189 | 1 | Console Tank w/Decals, SZL-36 |
| 40 | 462069 | 1 | Key Fob Assembly |
| 41 | 483472 | 1 | Ignition Switch |
| 42 | 04021-26 | 2 | Nut, #10-24 Elastic Stop |
| 43 | 483645 | 1 | Throttle Control, Kawasaki / Briggs & Stratton |
| 44 | 04003-43 | 2 | Bolt, Carriage #10-24 x 1/2″ |
| 45 | 483646 | 1 | Choke Control, Kawasaki / Briggs & Stratton |
| 46 | 04030-02 | 4 | Lockwasher, 1/4″ |
| 47 | 04040-14 | 4 | Flatwasher, 1/4-.312 x .750 x .065 |
| 48 | 462942 | 1 | Instrument Panel w/Decal, SZL-36 |
| 49 | 484565 | 1 | Hourmeter, Inductive |
| 50 | 485833 | 1 | Switch, PTO |
| 51 | 04030-04 | 6 | Washer, Lock 3/8 Spring |
| 52 | 04001-19 | 2 | Bolt, Hex Head 3/8-16 x 1″ |
| 53 | 04132-01 | 2 | Threaded Insert, 3/8-16 |
Not available through Scag Power Equipment. Purchase locally.
48, 52 & 61 ELECTRICAL SYSTEM
| Part No. | Qty | Description | |
|---|---|---|---|
| 1 | 04001-44 | 5 | Bolt, Hex Head 1/4-20 x 1/2″ |
| 2 | 04020-02 | 2 | Nut, 1/4-20 UNC |
| 3 | 48029-29 | 1 | Cable, Battery – 18″ Red |
| 4 | 04002-06 | 1 | Screw, M8-1.25 X 16 Shakeproof |
| 04011-14 | Screw, 1/4″ – 20 x .75″ (Kohler) | ||
| 5 | 48029-14 | 1 | Cable, Battery – 31-1/2″ Black |
| 6 | *485212 | 1 | Battery, 12v – 230CCA |
| 7 | 48126 | 4 | Rubber Boot |
| 8 | 485506 | 1 | Pad, Battery – Rubber |
| 9 | 485505 | 2 | Pad, Battery – Rubber |
| 10 | 04011-14 | 2 | Screw, 1/4-20 x 3/4″ Shakeproof |
| 11 | 483278 | 1 | Solenoid, Sealed |
| 12 | 04001-08 | 3 | Bolt, Hex Head 5/16-18 x 3/4″ |
| 13 | 04030-03 | 3 | Lockwasher, 5/16″ |
| 14 | 04040-15 | 3 | Flatwasher, 5/16-.375 x .875 x .083 |
| 15 | 428184 | 1 | Battery Hold Down |
| 16 | 04017-15 | 2 | Bolt, Hex Head 5/16-18 x 1/2″ Serrated Flange |
| 17 | 04117-01 | 4 | Nut, 5/16-18 Elastic Stop |
| 18 | 486518 | 1 | Wire Harness |
| 19 | 04003-12 | 5 | Bolt, Carriage 5/16-18 x 3/4″ |
| 20 | 483474 | 1 | Switch, Double Pole – Twist |
| 21 | 04001-32 | 4 | Bolt, Hex Head 3/8-16 x 1-1/4″ |
| 22 | 483629 | 2 | Fuse Holder |
| 23 | 427961 | 1 | Plate, Anti-Rotation |
| 428752 | 1 | Plate, Anti-Rotation – Warner (SZL-48H) | |
| 24 | 487077 | 1 | Clutch, Warner (SZL-48H, SZL-52H) |
| 484063 | 1 | Clutch, GT2 (SZL-61H) | |
| 25 | 04041-28 | 1 | Flatwasher, 7/16-.496 x 1.75 x .25 |
| (not used on SZL-48) | |||
| 26 | 04030-05 | 1 | Lockwasher, 7/16″ |
| 27 | 04102-12 | 1 | Bolt, Hex Head 7/16-20 x 3¼” w/Patch |
| 28 | 487032 | 1 | Pulley, 4-1/2″ Dia. – 1″ Bore (SZL-48H, SZL-52H) |
| 487394 | 1 | Pulley, 4-1/2″ Dia. – 1″ Bore (SZL-61H) | |
| 29 | 04063-01 | 1 | Key, 1/4 x 1/4 x 1-1/4″ (SZL-48H, SZL-52H) |
| 04063-42 | 1 | Key, 1/4 x 1/4 x 3″ (SZL-61H) | |
| 30 | 483958 | 1 | Diode (part of wire harness) |
| 31 | 04117-03 | 4 | Nut, 1/4-20 Flange Elastic Stop |
| 32 | 426727 | 2 | Bracket, Switch |
| 33 | 483473 | 3 | Switch, Double Pole – Plunger |
| 34 | 04003-02 | 4 | Bolt, Carriage 1/4-20 x 3/4″ |
| Part No. | Qty | Description | |
| --- | --- | --- | --- |
| 35 | 04003-04 | 1 | Bolt, Carriage 5/16-181 x 1″ |
| 36 | 04019-03 | 1 | Nut, 5/16-18 Serrated Flange |
| 37 | 428185 | 1 | Mounting Bracket, Fuel Tank Front |
| 38 | 04031-03 | 1 | Lockwasher, 5/16″ Ext. |
| 39 | 04041-38 | 1 | Flatwasher, 3/8-.406 x 2.25 x .188 |
| 40 | 463191 | 1 | Console Tank, SZL |
| 41 | 483472 | 1 | Ignition Switch |
| 42 | 462069 | 1 | Key Fob Assembly |
| 483609 | 1 | Key w/Shroud Only | |
| 43 | 484565 | 1 | Hourmeter, Inductive |
| 44 | 485833 | 1 | Switch, PTO Sealed |
| 45 | 483434 | Throttle Cable – Kohler | |
| 483645 | 1 | Throttle Cable – Kawasaki, Briggs, Scag | |
| 46 | 04021-26 | 2 | Nut, #10-24 Elastic Stop |
| 47 | 04003-43 | 2 | Bolt, Carriage #10-24 x 1/2″ |
| 48 | 483435 | 1 | Choke Control – Kohler |
| 483646 | 1 | Choke Control – Kawasaki, Briggs, Scag | |
| 49 | 483529 | 1 | Wire Harness Adapter, Kawasaki Only |
| 50 | 04030-02 | 3 | Lockwasher, 1/4″ |
| 51 | 04040-14 | 3 | Flatwasher, 1/4-.312 x .750 x .065 |
| 52 | 462793 | 1 | Instrument Panel w/Decal |
| 53 | 04024-03 | 2 | Nut, 5/16 Push-On |
| 54 | 483642 | 1 | Double Fuse Assembly (incl. 22, 55, 56, 57) |
| 55 | 482588 | 2 | Clip, Wire |
| 56 | 483571 | 1 | Cover, Double |
| 57 | 48298 | 2 | Fuse, 20 Amp |
| 58 | 48029-29 | 1 | Cable, Battery – 18″ Red (Kawasaki) |
| 48029-13 | 1 | Cable, Battery – 25″ Red (Kohler) | |
| 59 | 04021-10 | 1 | Nut, 5/16-18 Elastic Stop |
| 60 | 04030-04 | 4 | Washer, Lock 3/8 Spring |
| 04031-03 | 1 | Washer, Lock 5/16 Ext Tooth (ground) |
Not available through Scag Power Equipment. Purchase locally.
FUEL SYSTEM
For California Only
SZL-36 & 42 Models Only SZL-48 52 & 61 Models Only
| Ref. No. | Part No. | Qty | Description |
|---|---|---|---|
| 1 | 484286 | 1 | Fuel Cap |
| *484297 | 1 | Fuel Cap, C.A.R.B. | |
| 2 | 484279-03 | 1 | Fuel Neck Insert |
| 3 | 484333 | 1 | Remote Vent, No Valve |
| 4 | 484285 | 1 | Grommet, Kelch |
| 5 | 485393 | 1 | Fuel Gauge (requires #6) |
| 6 | 485394 | 1 | Grommet, Fuel Gauge |
| 7 | 485391 | 1 | Valve, Fuel Shut Off |
| 8 | 482571 | 1 | Bushing, .56 Dia. Viton |
| 9 | 463188 | 1 | Fuel Tank Assembly (incl. 1, 2, 3, 4, 5, 6, 7, 8) SZL-36, 42 |
| 463190 | 1 | Fuel Tank Assembly (incl. 3, 4, 5, 6, 7, 8) SZL-48, 52 & 61 | |
| 10 | 04001-08 | 4 | Bolt, Hex Head 5/16-18 x 3/4″ |
| 11 | 04030-03 | 4 | Lockwasher, 5/16″ |
| 12 | 04040-15 | 4 | Flatwasher, 5/16-.375 x .875 x .083 |
| 13 | **428185 | 1 | Mounting Bracket, Fuel Tanks Front |
| 14 | **04019-03 | 1 | Nut, 5/16-18 Serrated Flange |
| 15 | **04003-12 | 1 | Bolt, Carriage 5/16-18 x 3/4″ |
| 16 | 48059-01 | 2 | Clamp, Fuel Hose 1/4″ |
| 17 | 483617 | – | Hose, Non-perm Fuel – 1/4″ Dia. (order by inch) |
| 18 | 04003-02 | 2 | Bolt, Carriage 1/4-20 x 3/4″ |
| 19 | 48059-02 | 2 | Clamp, Fuel Hose 7/32″ ID |
| 20 | 484347 | 2 | Hose, 1/4″ Vapor Return (order by inch) |
| 21 | 484343-01 | 1 | Mender, 1/4 x 3/16 w/.02 Hole |
| 22 | 48059-05 | 2 | Clamp, Vapor Hose -3/16″ |
| 23 | 484345 | – | Hose, Vapor (order by inch) |
| *24 | 484345 | – | Hose, Vapor (order by inch) |
| *25 | 484345 | – | Hose, Vapor (order by inch) |
| *26 | 48059-05 | 2 | Clamp, Vapor Hose – 3/16″ |
| *27 | 484287 | 1 | Carbon Canister, 400cc |
| 484366 | 1 | Dust Filter (not shown. Incl. with #27) | |
| *28 | 48136-17 | 17 | Clamp, 3-1/2″ Max. Dia. |
| *29 | **426326 | 1 | Bracket, Canister Mount |
| *30 | 04019-02 | 1 | Nut, 1/4-20 Serrated Flange |
- California Only
- Excludes SZL-36
HYDRO-GEAR TRANSAXLE (ZT-2800 36″/42″)
Ref. No.| ****
Part No.
| ****
Description
---|---|---
1| HG53246| Screw, Hex Washer
2| HG54730| Plug, External Hex Vent 9/16-18
3| HG73096| Kit, Side Cover LH
| HG73095| Kit, Side Cover RH
4| HG50132| Washer, Flat, .51 x 1 x .03
5| HG51083| Pin, Jackshaft
6| HG52583| Gear, 11T
7| HG52110| Gear, 45T
8| HG72749| Kit, Bearing
9| HG53336| Spacer, .75 x 1.32 x .257
10| HG52108| Gear, 54T
11| HG73073| Kit, Main Housing LH, Charge, Control
| HG73069| Kit, Main Housing RH, Charge, Control
12| HG55232| Seal, Lip, .375 x .75 x .25
13| HG51628| Ring, Retaining External .375
14| HG52136| Rod, Bypass .375 x 2.88
15| HG51627| Ring, Retaining .75, Internal
16| HG52370| Arm, Bypass (LH)
| HG51910| Arm, Bypass (RH)
17| HG51630| Ring, Retaining .375, External
18| HG72979| Kit, Fan/Pulley
19| HG50329| Ring, Retaining Internal
20| HG51161| Seal, Lip, 17 x 40 x 7
21| HG50951| Washer, Flat, 1.23 x 1.57 x .04
22| HG73047| Kit, Input Shaft
23| HG71569| Kit, Shaft Axle
24| HG53656| Bearing, 25.4 x 52 x 15 Ball (6205R)
25| HG53514| Washer, Flat, 1.355 x 2.035 x .021
26| HG53699| Seal, Lip, TC4, 1 x 2.06 x .38
27| HG50859| Ring, Retaining 2.25 Internal
28| HG71446| Kit, Hub 4 Bolt
29| HG72320| Kit, Hub Puller
30| HG53501| Cap, Axle
31| HG71598| Kit, RTN Bidirectional (LH)
| HG71595| Kit, RTN Bidirectional (RH)
32| HG51605| Spring, Extension
33| HG52114| Filter, Spin-on 2.6 x 3
34| HG51616| Bolt, 5/16-24 x 7/8 (w/patch)
35| HG44130| Washer, Flat .34 x .88 x .06
36| HG51946| Arm, Return Left (LH)
| HG51945| Arm, Neutral Right (RH)
37| HG54315| Spacer, .32 ID x 1.005 OD x .1495 THK
38| HG51140| Seal, Lip 18 x 32 x 7
39| HG54501| Tube, Charge Triple O-Ring
40| HG72274| Kit, Charge
41| HG72291| Kit, Gerotor Seal
Ref. No.| ****
Part No.
| ****
Description
---|---|---
42| HG71854| Kit, Filter Guard (LH)
| HG73041| Kit, Filter Guard (RH)
43| HG51048| Swashplate, Trunnion
44| HG50551| Bearing, Thrust 30 x 52 x 13
45| HG70723| Kit, Block 7 Piston
46| HG51462| Bearing, Thrust 35 x 62 x 18
47| HG72882| Kit, 16cc Cylinder Block Assembly
48| HG71436| Kit, Charge Relief
49| HG72515| Kit, Center Section, LH Charge
| HG72516| Kit, Center Section, RH Charge
50| HG52150| Shaft, Motor
51| HG51069| Washer, Flat, .71 x 1.16 x .04
52| HG52109| Gear, 14T
53| HG44145| Ring, Retaining, Motor Shaft
54| HG44371| Washer, Flat, .63 x 1 x .05
55| HG73121| Kit, Inboard, RH Rot B / LH Rot A (LH)
| HG73120| Kit, Inboard, RH Rot A / LH Rot B (RH)
56| HG53973| Handle, Actuating
57| HG53019| Ring, Retaining – External .438
58| HG73107| Kit, Seal (ZT-2800) (INCL. 12,13,14,15,17,19
| | 20,38,39,41,53,57)
59| *HG50928| Tube, Sealant
60| HG50132| Washer, .51 x 1.00 .03 Flat
61| HG54974| Plug 3/4 – 16
62| HG55380| Fitting 9/16 – 18, Breather
63| HG55072| Expansion Tank LH, Internal
| HG55071| Expansion Tank RH, Internal
TUFF TORQ TRANSAXLE – LH (TZ-450C-X 48″)
Ref. No.| ****
Part No.
| ****
Description
---|---|---
TT-3| TT187Q0899000| Tuff Tech Oil (3 Liter Bottle)
1| 486650| Tz-450c-X Transaxle (Pre-Filled)
2| TT187Q1624150| Upper Housing X
3| TT187Q2124360| Lower Housing Fy
4| TT187Q1624450| Square Seal
5| TT187Q2124550| Top Cover A
6| TT187Q1624440| Bypass Piping
7| TT168T2024250| Vent Valve
8| TT19216324360| Magnet 28 3.5
9| TT22857400080| Screw 4.08
10| TT1A632099320| Drain Bolt Kit
11| TT22190-100000| Washer Seal 10
12| TT187Q1629410| Washer 4.5101
13| TT187Q1629710| Control Lever L
14| TT187Q1629100| Seal, Tc253506
15| TT187Q1629800| Control Shaft
16| TT187Q1629810| Control Shaft Short
17| TT19215489090| Snap Ring
18| TT187Q1629860| Torsion Spring
19| TT22137120000| Washer 12
20| TT187T0134390| Oil Seal 153507
21| TT22252000350| Snap Ring C 35
22| TT17808002080| Ring 1.2
23| TT1A646034770| Bearing
24| TT187Q1636200| Brake Shaft
25| TT187Q2125100| Pump Shaft C
26| TT26450060162| Socket Bolt 616
27| TT24311000120| O-Ring 1a P12
28| TT187Q1629510| Bypass Lever
29| TT187Q1629310| Bypass Shaft
30| TT19215425200| Pump Spring
31| TT187Q1636370| Brake Fork 20 Cr
32| TT187Q1629450| Control Bush Lfb2510
33| TT1A632010650| M10 65 Bolt
39| TT187Q2124740| Check Stopper Pfg
40| TT187Q1625150| Cylinder Block Kit / Order Repair Kit
41| TT19215434240| Bushing 25.4
42| TT22351050032| Spring Pin 5 32
43| TT187Q1634050| Seal Tc284008
45| TT187Q1684530| Swashplate
46| TT187Q0610070| Lock Nut 10
47| TT26106060452| Bolt 645
48| TT187T0029940| Fulcrum
49| TT26450080352| Bolt 8 35
50| TT187Q2124450| Centercase Cp / Order Repair Kit
51| TT26106120652| Bolt 1265
52| TT168T2025080| Cylinder Block Kit(Motor / Order
| | Repair Kit
54| TT187Q1624500| Motor Housing
55| TT187T0034750| Thrust Bearing
56| TT187Q1625430| Motor Gear S
57| TT187Q1625300| Motor Shaft
58| TT187Q1633520| Bearing 6201 Cn
Ref. No.| ****
Part No.
| ****
Description
---|---|---
63| TT24311240100| 0-Ring 1a P10a
64| TT26476080302| Tapping Bolt 830
70| TT187Q2124800| Bracket Assy Fts
71| TT187Q1629350| Bypass Guide
72| TT187Q1629370| Bypass Pin
73| TT187Q1629390| Bypass Spring
74| TT22351030018| Pin 3.0 18
75| TT1A646088410| Pin 2.5 9.8
76| TT1A646088450| Charge Spring
77| TT187Q0826100| Pump Case
78| TT1A646031100| Rotor Set
80| TT187Q1624300| Final Plate
81| TT26106100302| Bolt 10 30
82| TT187Q2136150| Brake Arm
83| TT26476080202| Tapping Screw 8 20
84| TT187Q1633380| Final Pinion Collar
85| TT187Q2133400| Final Pinion Shaft
86| TT187Q1633150| Reduction Gear S
88| TT187Q2133420| Reduction Collar
89| TT187Q2133420| Washer 14.1 X 30 X 3.5
90| TT187Q1633710| Final Gear Sv
91| TT187Q1634060| Clip
92| TT19215434240| Axle Bush
94| TT187Q1634150| Axle Shaft T
95| TT187Q0834370| Washer
96| TT187Q0634410| Nut Cap
97| TT187Q0634120| Lock Nut 3/4-16
98| TT187Q2134300| Flange Spacer
99| TT1A646099500| Sealant
100| TT187Q2134800| Flange Assy.
101| TT24311000160| O-Ring 1a P16
102| TT187P0113190| Dipstick Assy.
104| TT1A632026450| Filter
105| TT24351240400| O-Ring 1a 24040
106| TT1A637024380| Cap 40
111| TT187Q2125700| Pulley,5.5
112| TT187Q1683060| Fan
113| TT19216829860| Lock Nut 10
200| TT187Q2199050| Seal Kit Tz-450
201| TT187Q2199140| Repair Kit Tz-450 C
*202| TT187Q2199300| Tz 450 Oil Change Kit
TUFF TORQ TRANSAXLE – RH (TZ-450C-Y 48″)
Ref. No.| ****
Part No.
| ****
Description
---|---|---
TT-3| TT187Q0899000| Tuff Tech Oil (3 Liter Bottle)
1| 486651| Tz-450c-Y Transaxle (Pre-Filled)
2| TT187Q1624160| Upper Housing X
3| TT187Q2124351| Lower Housing Fy
4| TT187Q1624450| Square Seal
5| TT187Q2124550| Top Cover A
6| TT187Q1624440| Bypass Piping
7| TT168T2024250| Vent Valve
8| TT19216324360| Magnet 28 3.5
9| TT22857400080| Screw 4.08
10| TT1A632099320| Drain Bolt Kit
11| TT22190-100000| Washer Seal 10
12| TT187Q1629410| Washer 4.5101
13| TT187Q1629720| Control Lever L
14| TT187Q1629100| Seal, Tc253506
15| TT187Q1629800| Control Shaft
16| TT187Q1629810| Control Shaft Short
17| TT19215489090| Snap Ring
18| TT187Q1629860| Torsion Spring
19| TT22137120000| Washer 12
20| TT187T0134390| Oil Seal 153507
21| TT22252000350| Snap Ring C 35
22| TT17808002080| Ring 1.2
23| TT1A646034770| Bearing
24| TT187Q1636200| Brake Shaft
25| TT187Q2125100| Pump Shaft C
26| TT26450060162| Socket Bolt 616
27| TT24311000120| O-Ring 1a P12
28| TT187Q1629510| Bypass Lever
29| TT187Q1629310| Bypass Shaft
30| TT19215425200| Pump Spring
31| TT187Q1636370| Brake Fork 20 Cr
32| TT187Q1629450| Control Bush Lfb2510
33| TT1A632010650| M10 65 Bolt
39| TT187Q2124740| Check Stopper Pfg
40| TT187Q1625150| Cylinder Block Kit / Order Repair Kit
41| TT19215434240| Bushing 25.4
42| TT22351050032| Spring Pin 5 32
43| TT187Q1634050| Seal Tc284008
45| TT187Q1684530| Swashplate
46| TT187Q0610070| Lock Nut 10
47| TT26106060452| Bolt 645
48| TT187T0029940| Fulcrum
49| TT26450080352| Bolt 8 35
50| TT187Q2124450| Centercase Cp / Order Repair Kit
51| TT26106120652| Bolt 1265
52| TT168T2025080| Cylinder Block Kit(Motor / Order
| | Repair Kit
54| TT187Q1624500| Motor Housing
55| TT187T0034750| Thrust Bearing
56| TT187Q1625430| Motor Gear S
57| TT187Q1625300| Motor Shaft
58| TT187Q1633520| Bearing 6201 Cn
Ref. No.| ****
Part No.
| ****
Description
---|---|---
63| TT24311240100| 0-Ring 1a P10a
64| TT26476080302| Tapping Bolt 830
70| TT187Q2124800| Bracket Assy Fts
71| TT187Q1629350| Bypass Guide
72| TT187Q1629370| Bypass Pin
73| TT187Q1629390| Bypass Spring
74| TT22351030018| Pin 3.0 18
75| TT1A646088410| Pin 2.5 9.8
76| TT1A646088450| Charge Spring
77| TT187Q0826100| Pump Case
78| TT1A646031100| Rotor Set
80| TT187Q1624300| Final Plate
81| TT26106100302| Bolt 10 30
82| TT187Q2136150| Brake Arm
83| TT26476080202| Tapping Screw 8 20
84| TT187Q1633380| Final Pinion Collar
85| TT187Q2133400| Final Pinion Shaft
86| TT187Q1633150| Reduction Gear S
88| TT187Q2133420| Reduction Collar
89| TT187Q2133420| Washer 14.1 X 30 X 3.5
90| TT187Q1633710| Final Gear Sv
91| TT187Q1634060| Clip
92| TT19215434240| Axle Bush
94| TT187Q1634150| Axle Shaft T
95| TT187Q0834370| Washer
96| TT187Q0634410| Nut Cap
97| TT187Q0634120| Lock Nut 3/4-16
98| TT187Q2134300| Flange Spacer
99| TT1A646099500| Sealant
100| TT187Q2134800| Flange Assy.
101| TT24311000160| O-Ring 1a P16
102| TT187P0113190| Dipstick Assy.
104| TT1A632026450| Filter
105| TT24351240400| O-Ring 1a 24040
106| TT1A637024380| Cap 40
111| TT187Q2125700| Pulley,5.5
112| TT187Q1683060| Fan
113| TT19216829860| Lock Nut 10
200| TT187Q2199050| Seal Kit Tz-450
201| TT187Q2199140| Repair Kit Tz-450 C
*202| TT187Q2199300| Tz 450 Oil Change Kit
Available through Scag Power Equipment
HYDRO-GEAR TRANSAXLE (ZT-2800 48″ / 52″)
Ref. No.| ****
Part No.
| ****
Description
---|---|---
1| HG53246| Screw, Hex Washer
2| HG54730| Plug, External Hex Vent 9/16-18
3| HG73096| Kit, Side Cover LH
| HG73095| Kit, Side Cover RH
4| HG50132| Washer, Flat, .51 x 1 x .03
5| HG51083| Pin, Jackshaft
6| HG52583| Gear, 11T
7| HG52110| Gear, 45T
8| HG72749| Kit, Bearing
9| HG53336| Spacer, .75 x 1.320 x .257
10| HG52108| Gear, 54T
11| HG73073| Kit, Main Housing LH, Charge, Control
| HG73069| Kit, Main Housing RH, Charge, Control
12| HG55232| Seal, Lip .375 x .75 x .25
13| HG51628| Ring, Retaining External .375
14| HG52136| Rod, Bypass .375 x 2.88
15| HG51627| Ring, Retaining .750, Internal
16| HG52370| Arm, Bypass LH
| HG51910| Arm, Bypass RH
17| HG51630| Ring, Retaining .375 External
18| HG51161| Seal, Lip 17 x 40 x 7
19| HG72972| Kit, Fan/Pulley
20| HG50329| Ring Retaining Internal
21| HG50951| Washer, Flat, 1.23 x 1.57 x .04
22| HG73047| Kit, Input Shaft
23| HG71569| Kit, Shaft Axle
24| HG53656| Bearing, 25.4 x 52 x 15 Ball (6205R)
25| HG53699| Seal, Lip, TC4, 1 x 2.06 x .38
26| HG71405| Kit, Hub, 4 Bolt
27| HG72320| Kit, Hub Puller
28| HG53088| Cap, axle
29| HG50859| Ring, Retaining 2.25 Internal
30| HG53514| Washer, Flat, 1.355 x 2.035 x .21
31| HG71598| Kit, Rtn Bidirectional LH
| HG71595| Kit, Rtn Bidirectional RH
32| HG51605| Spring, Extension
33| HG52114| Filter, Spin-on 2.6 x 3
34| HG44130| Washer Flat, .34 x .88 x .06
35| HG51616| SHCS, 5/16-24 x 7/8 (w/ patch)
36| HG54315| Spacer, .320 ID x 1.005 OD x .1495 Thk
37| HG51946| Arm, Return Left (LH)
| HG51945| Arm, Return Right (RH)
38| HG51140| Seal, Lip 18 x 32 x 7
39| HG54501| Tube, Charge Triple O-ring
40| HG72274| Kit, Charge
41| HG51462| Bearing, Thrust 35 x 62 x 18
Ref. No.| ****
Part No.
| ****
Description
---|---|---
42| HG72882| Kit, 16cc Cylinder Block Assembly Screw, Hex Washer 1/4-20 x .75
Kit, Gerotor Seal
Guard, Filter, LH Guard, Filter, RH Swashplate, Trunnion
Bearing, Thrust 30 x 52 x 13 Kit, Block 7 Piston
Kit, Inboard, RH Rot B / LH Rot A (LH) Kit, Inboard, RH Rot A / LH Rot B (RH) Kit, Charge Relief
Kit, Center Section, LH Charge Kit, Center Section, RH Charge Gear, 14T
Washer, Flat, .63 x 1 x .5 Retaining Ring, Motor Shaft Washer, Flat, .71 x 1.16 x .04 Shaft, Motor
Ring, Retaining – External .438 Handle, Actuating
Kit, Seal (ZT-2800) (INCL.12,13,15,17,18,20, 38,39,44,54,57)
Tube, Sealant Plug 3/4 – 16
Fitting, 9/16 – 18 Breather Expansion Tank LH, Internal Expansion Tank RH, Internal
43| HG50752
44| HG72291
45| HG71854
| HG73041
46| HG51048
47| HG50551
48| HG70723
49| HG73121
| HG73120
50| HG71436
51| HG72515
| HG72516
52| HG52109
53| HG44371
54| HG44145
55| HG51069
56| HG52150
57| HG53019
58| HG53973
59| HG73107
60| *HG50928
61| HG54974
62| HG55380
63| HG55072
| HG55071
HYDRO-GEAR TRANSAXLE (ZT-3100 61″)
Ref. No.| ****
Part No.
| ****
Description
---|---|---
1| HG53246| Screw, Hex Washer
2| HG54730| Plug, External Hex Vent 9/16-18
3| HG73096| Kit, Side Cover LH
| HG73095| Kit, Side Cover RH
4| HG50132| Washer, Flat, .51 x 1 x .03
5| HG51083| Pin, Jackshaft
6| HG52586| Gear, 11T (Steel)
7| HG52110| Gear, 45T
8| HG72749| Kit, Bearing
9| HG53336| Spacer, .75 x 1.32 x .257
10| HG52108| Gear, 54T
11| HG73073| Kit, Main Housing LH, Charge, Control
| HG73069| Kit, Main Housing RH, Charge, Control
12| HG55232| Seal, Lip, .375 x .75 x .25
13| HG51628| Ring, Retaining External .375
14| HG52136| Rod, Bypass .375 x 2.88
15| HG51627| Ring, Retaining .75, Internal
16| HG52370| Arm, Bypass (LH)
| HG51910| Arm, Bypass (RH)
17| HG51630| Ring, Retaining .375, External
18| HG72972| Kit, Fan/Pulley
19| HG50329| Ring, Retaining Internal
20| HG51161| Seal, Lip, 17 x 40 x 7
21| HG50951| Washer, Flat, 1.23 x 1.57 x .04
22| HG73047| Kit, Input Shaft
23| HG71569| Kit, Shaft Axle
24| HG53656| Bearing, 25.4 x 52 x 15 Ball (6205R)
25| HG53514| Washer, Flat, 1.355 x 2.035 x .021
26| HG53699| Seal, Lip, TC4, 1 x 2.06 x .38
27| HG50859| Ring, Retaining 2.25 Internal
28| HG71405| Kit, Hub 4 Bolt
29| HG72320| Kit, Hub Puller
30| HG53088| Cap, Axle
31| HG71598| Kit, RTN Bidirectional (LH)
| HG71595| Kit, RTN Bidirectional (RH)
32| HG51605| Spring, Extension
33| HG52114| Filter, Spin-on 2.6 x 3
34| HG51616| Bolt, 5/16-24 x 7/8 (w/patch)
35| HG44130| Washer, Flat .34 x .88 x .06
36| HG51946| Arm, Return Left (LH)
| HG51945| Arm, Neutral Right (RH)
37| HG54315| Spacer, .32 ID x 1.005 OD x .1495 THK
38| HG51140| Seal, Lip 18 x 32 x 7
39| HG54501| Tube, Charge Triple O-Ring
40| HG72274| Kit, Charge
41| HG72291| Kit, Gerotor Seal
Ref. No.| ****
Part No.
| ****
Description
---|---|---
42| HG71854| Kit, Filter Guard (LH)
| HG73041| Kit, Filter Guard (RH)
43| HG51048| Swashplate, Trunnion
44| HG50551| Bearing, Thrust 30 x 52 x 13
45| HG70723| Kit, Block 7 Piston
46| HG51462| Bearing, Thrust 35 x 62 x 18
47| HG72882| Kit, 16cc Cylinder Block Assembly
48| HG71436| Kit, Charge Relief
49| HG73286| Kit, Center Section, LH Charge
| HG73285| Kit, Center Section, RH Charge
50| HG52150| Shaft, Motor
51| HG51069| Washer, Flat, .71 x 1.16 x .04
52| HG52341| Gear, 14T (Steel)
53| HG44145| Ring, Retaining, Motor Shaft
54| HG44371| Washer, Flat, .63 x 1 x .05
55| HG73121| Kit, Inboard, RH Rot B / LH Rot A (LH)
| HG73120| Kit, Inboard, RH Rot A / LH Rot B (RH)
56| HG53973| Handle, Actuating
57| HG53019| Ring, Retaining – External .438
58| HG73107| Kit, Seal (ZT-2800) (INCL. 12,13,14,15,17,19
| | 20,38,39,41,53,57)
59| *HG50928| Tube, Sealant
60| HG55380| Fitting 9/16-18, Breather
61| HG55072| Expansion Tank, Internal LH
| HG55071| Expansion Tank, Internal RH
62| HG54974| Plug, 3/4 – 16
REPLACEMENT DECALS AND INFORMATION PLATES
| Ref. No. | Part No. | Qty | Description |
|---|---|---|---|
| 1 | 483402 | 2 | Decal, Belt Cover |
| 2 | 483405 | 1 | Decal, Warning |
| 3 | 485551 | 1 | Decal, Start/Drive |
| 4 | 483505 | 2 | Decal, Spinning Blades |
| 5 | 482100 | 2 | Decal, Traction Control |
| 6 | 486492 | 1 | Decal, Height of Cut |
| 7 | 486797 | 1 | Decal, 36 Hero |
| 486896 | 1 | Decal, 42 Hero | |
| 486798 | 1 | Decal, 48 Hero | |
| 486799 | 1 | Decal, 52 Hero | |
| 486800 | 1 | Decal, 61Hero | |
| 8 | 483406 | 1 | Decal, Knives |
| 9 | 486992 | 1 | Decal, Adjustments – SZL |
| 10 | 485820 | 1 | Decal, Instrument Panel – SZL (36) |
| 485387 | 1 | Decal, Instrument Panel – SZL (48 52 & 61) | |
| 11 | 486517 | 2 | Decal. Liberty Z – Fuel Tank |
| 12 | 485821 | 1 | Decal, Belt Routing – SZL (36) |
| 485516 | 1 | Decal, Belt Routing – SZL(48 52& 61) | |
| 13 | 486493 | 1 | Decal, Cutter Deck Lift Control |
| * | 483900 | 1 | Decal, Warning Spark Arrestor (California Only) – Not Shown |
| 14 | 485403 | 1 | Decal, USA |
ELECTRICAL SCHEMATIC
