Wera 3160 i-7 Rack Kraftform Screwdrivers Instruction Manual
- October 30, 2023
- Wera
Table of Contents
3160 i-7 Rack Kraftform Screwdrivers
Instruction Manual
3160 i/7 Screwdriver set, stainless and rack, 7 pieces
Series Kraftform Screwdrivers Stainless Steel VDE
3160 i-7 Rack Kraftform Screwdrivers
EAN: | 4.01329E+12 |
---|---|
Part number: | 5022728001 |
Article number: | 3160 i/7 Rack |
Size: | 285x210x55 mm |
Weight: | 662 g |
Country of origin: | CZ |
Customs tariff number: | 82054000 |
- Insulated blades for secure work at 1,000 volts
- Multi-component Kraftform handle for high working speeds and ergonomic screwdriving
- Take it easy tool finder: colour coding according to profile and size
- Hexagonal anti-roll feature against rolling away
- Lasertip tip, stainless to prevent extraneous rust
High quality Kraftform Plus VDE screwdriver set out of stainless steel by
Wera. The stainless tools from Wera are vacuum ice-hardened and have the
hardness and strength needed for screw connections. They can be used for
industrial application without hesitation. The individual testing of the
Kraftform Stainless VDE screwdrivers in a water bath at 10,000 volts as per
DIN EN 60900 (IEC 60900) ensures safe working with voltages of up to 1,000
volts. Secure working is also ensured under extreme conditions and verified
with the proven cold impact resistance at -40° C. Mainly with Lasertip: the
Lasertip tip literally bites into the screw head and prevents any slipping out
of the screw recess. Multi-component Kraftform handle for fast and low-fatigue
working. “Take it easy” Tool Finder: colour coding according to profile and
size. The hexagonal anti-roll feature prevents any bothersome rolling away at
the workplace. Includes a practical rack for tidy storage of the screwdrivers.
Why are stainless elements so often affected by rust? One reason: screwdriving
jobs are often carried out with a tool out of made from conventional steel
which can result in extraneous rust forming. This is annoying. We were
confident that this could be prevented by using tools likewise out of
stainless steel and meeting the required standard of industrial hardness. A
tool series out of stainless steel. The forming of extraneous rust is
prevented and a special vacuum ice-hardening process ensures the required
degree of hardness – and they are even VDE-tested, too.
Individually teste The individual testing at 10,000 volts, in accordance
with IEC 60900, ensures safe working with loads up to 1,000 volts.Solution to the rust problem: screwdriving stainless steel together
with stainless steel! Wera stainless steel tools are manufactured out of
stainless steel so unsightly rust can be avoided.The stainless steel tools from Wera are vacuum ice-hardened and have
the hardness and strength needed for screw connections. There are no
limitations to the industrial applications they are suitable for.
Lasertip A precisely-focused laser creates a sharp-edged surface
structure. This laser treatment results in an edge hardness of up to 1000 HV
0.3. Wera Lasertip “bites” itself into the screw head and prevents any slips
out of the recess. It is available for screwdrivers for slotted, Phillips and
Pozidriv screws.
Reduced contact pressure Wera Lasertip reduces the contact pressure required and
enhances force transfer – meaning less screwdriving effort is required.
Screwdriving becomes safer and easier.
“Take it easy” Tool Finder
Screwdrivers with “Take it easy” tool finder: colour coding according to
profile and size stamp.
Non-roll feature The hexagonal non-roll feature
prevents any rolling away at the workplace.
Set contents:
3247 Single-pole phase tester, stainless, 0.5 x 3 x 70 mm……………. 1x 0.5 x 3 x
70 mm
3162 i PH VDE Insulated screwdriver for Phillips screws, stainless, PH 2 x 100 mm
05022734001……………………………… 1x PH 2 x 100 mm
05022733001………………………. 1x PH 1 x 80 mm
3160 i VDE Insulated screwdriver for slotted screws, stainless, 0.5 x 3 x 80
mm
05022729001 1) | 1x 0.5 x 3 x 80 mm |
---|---|
05022730001 1) | 1x 0.6 x 3.5 x 100 mm |
05022731001 | 1x 0.8 x 4 x 100 mm |
050227320011) without Lasertip | 1x 1 x 5.5 x 125 mm |
Product not available in the USA and Canada.
Web link
https://products.wera.de/en/tools_for_electricians_series_kraftform_screwdrivers_stainless_steel_vde_3160_i_7_rack.html
Wera – 3160 i/7 Rack
05022728001 – 4013288118073
Wera Werkzeuge GmbH
Korzerter Straße 21-25
D-42349 Wuppertal
Tel: +49 (0)2 02 / 40 45-0
E-Mail: info@wera.de
26.08.2022
References
- TCPDF
- 3160 i/7 Screwdriver set, stainless and rack, 7 pieces - Wera Product finder
- 3160 i VDE Insulated screwdriver for slotted screws, stainless - Wera Product finder
- 3162 i PH VDE Insulated screwdriver for Phillips screws, stainless - Wera Product finder
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>