SCAG SW-32-14FS SW Walk Behind Instruction Manual
- June 11, 2024
- SCAG
Table of Contents
SCAG SW-32-14FS SW Walk Behind
ILLUSTRATED PARTS LIST
32″ & 36A CUTTER DECKS
| Ref. No. | Part No. | Description | 32 | 36 |
|---|---|---|---|---|
| 1 | 461847 | Cutter Deck w/Decals | x | |
| 1A | 461848 | Cutter Deck w/Decals | x | |
| 2 | 461663 | Cutter Spindle Assembly | x | x |
| 3 | 43312 | Spacer, Outside | x | x |
| 5 | 481022 | Bearing, Tapered | x | x |
| 6 | 43644 | Spindle Housing | x | x |
| 7 | 04001-154 | Bolt, 5/16-18 x 4-3/4″ | x | x |
| 8 | 43589 | Spindle Shaft | x | x |
| 9 | 04001-51 | Bolt, 3/8-16 x 3-3/4″ Hex | x | x |
| Head | ||||
| 10 | 04063-08 | Key, 1/4 x 1/4 x 2″ | x | x |
| 11 | 43592 | Spacer, Cutter Blade – Small | x | x |
| 12 | 04001-175 | Bolt, 5/16-18 x 1-1/2″ Hex | x | x |
| Head Grade 8 | ||||
| 13 | 482245 | Spring, Chute Return | x | x |
| 14 | 04019-03 | Nut 5/16-18 Serrated Flange | x | x |
| 15 | 481706 | Cutter Blade, 16-1/2″ | x | |
| 481707 | Cutter Blade, 18″ | x | ||
| 15A | 481710 | Cutter Blade 16-1/2 Hi-Lift | x | |
| 481711 | Cutter Blade, 18 Hi-Lift | x | ||
| 16 | 04043-06 | Flatwasher, 5/8 W | x | x |
| 17 | 04001-41 | Hex Hd. Bolt, 5/8-11 x 9-1/2″ | x | x |
| 18 | 461023 | Caster Assembly | x | x |
| 19 | 04017-16 | Cpscrw,5/16-18 x 3/4″ Ser. | x | x |
| Flg. Hex Head | ||||
| 20 | 461355 | Discharge Chute | x | |
| 20A | 461356 | Discharge Chute | x | |
| *462469 | CA Discharge Chute | x | ||
| *425872 | Turbo Baffle | x | ||
| 21 | 04021-10 | Hex Nut, 5/16-18 Elastic | x | x |
| Stop | ||||
| 22 | 04001-09 | Hex Hd Bolt, 5/16-18 x 1″ | x | x |
| 23 | 462392 | Belt Cover Assy (Incl. Decal) | x | |
| 23A | 462393 | Belt Cover Assy (Incl. Decal) | x | |
| 24 | 04043-04 | Flat Washer, 3/8″ Special | x | x |
| 25 | 04029-03 | Wing Nut, 3/8-16 | x | x |
| 26 | 482744 | Pulley | x | x |
| 27 | 48926 | Tapered Hub | x | x |
| 28 | 04001-172 | Hex Hd. Bolt, 1/4-20 x 1″ | x | x |
| 29 | 04020-09 | Hex Nut, 5/8-11 | x | x |
| 30 | 48278 | Belt, Blade Drive | x | |
| 30A | 48204 | Belt, Blade Drive | x | |
| 31 | 04021-22 | Elastic Stop Nut, 5/16-18 | x | x |
| Grade 8 | ||||
| 32 | 04021-05 | Hex Nut, 3/8-16 Center | x | x |
| Locknut | ||||
| 33 | 04019-04 | Nut, 3/8-16 Serrated Flange | x | x |
| 34 | 04004-02 | Support, Belt Cover | x | x |
| 35 | 04017-37 | Cpscrw, 1/2-13 x 1-1/4″ Ser. | x | x |
| Flg. HH | ||||
| 36 | 04117-04 | Nut, 1/2-13 Flange El. Stop | x | x |
| 37 | 43277 | Spacer, J-Hook | x | x |
| 38 | 04041-12 | Flatwasher, 3/8 x 1-1/2 x | x | x |
| 16 GA | ||||
| 39 | 04021-09 | Elastic Stop Nut, 3/8-16 | x | x |
| 40 | 43681 | Idler Pivot | x | x |
| 41 | 461841 | Idler Arm Assy. (Inc. 42) | x | x |
| 42 | 48224 | Bearing | x | x |
| 43 | 04001-62 | Cpscrw, 3/8-16 x 3-1/4″ Hex | x | x |
| Head | ||||
| 44 | 44078 | J-Hook | x | x |
| Ref. No. | Part No. | Description | 32 | 36 |
| --- | --- | --- | --- | --- |
| 45 | 483215 | Idler Pulley, Belt Clutch | x | x |
| 46 | 481024 | Seal, Cutter Spindle | x | x |
| 47 | 43297 | Spindle Bushing | x | x |
| 48 | 43296 | Spacer, Inside | x | x |
| 49 | 481035 | Nut,1.06-18 | x | x |
| 50 | 48677 | Relief Fitting, Cutter Spindle | x | x |
| 51 | 481025 | Seal, Cutter Spindle | x | x |
| 52 | 484368 | Spindle Shield | x | x |
| 53 | 04029-04 | Wing Nut, 3/8-16 (Small) | x | x |
| RH side | ||||
| 54 | 48114-04 | Grease Fitting | x | x |
| 55 | 04021-09 | Nut, Hex Elastic Stop 3/8-16 | x | x |
| 56 | 04030-03 | Lock Washer, 5/16″ | x | x |
| 57 | 04003-23 | Bolt, Carriage 3/8-16 x 1″ | x | x |
| 58 | 423783 | Baffle Weldment | x | |
| 59 | 483174 | Pad, Deck Wear | x | x |
| 60 | 04003-12 | Bolt, Carriage 5/16-18 x 3/4″ | x | x |
| 61 | 04040-04 | Flatwasher, 5/16″ | x | x |
| 62 | 04021-04 | Hex Nut, 5/16-18 Center | x | x |
| Locknut | ||||
| 63 | 424367 | Dust Shield | x | x |
| 64 | 424661 | Heatshield | x | x |
48V & 52V CUTTER DECKS
| Ref. No. | Part No. | Description | 48 | 52 |
|---|---|---|---|---|
| 1 | 461852 | Cutter Deck w/Decals | x | |
| 461855 | Cutter Deck w/Decals | x | ||
| 2 | 461663 | Spindle Assembly | x | x |
| 3 | 43296 | Spacer, Inside | x | x |
| 4 | 482744 | Pulley | x | x |
| 5 | 481022 | Tapered Bearing | x | x |
| 6 | 43644 | Spindle Housing | x | x |
| 7 | 48114-04 | Grease Fitting Str. 5/16″ | x | x |
| 8 | 43589 | Spindle Shaft | x | x |
| 9 | 43682 | Idler Pivot | x | x |
| 10 | 04063-08 | Key, 1/4 x 1/4 x 2″ | x | x |
| 11 | 43592 | Spacer, Cutter Blade – Small | x | x |
| 12 | 04001-175 | Bolt, 5/16-18 x 1-1/2″ Hex | x | x |
| Head Gr. 8 | ||||
| 13 | 04001-154 | Bolt, 5/16-18 x 4-3/4″ Hex | x | x |
| Head | ||||
| 14 | 04019-03 | Serr. Flange Nut, 5/16-18 | x | x |
| 15 | 481706 | Cutter Blade 16-1/2″ | x | |
| 481707 | Cutter Blade 18″ | x | ||
| 15A | 481710 | Cutter Blade 16-1/2 Hi-Lift | x | |
| 481711 | Cutter Blade 18 Hi-Lift | x | ||
| 16 | 04043-06 | Flatwasher,5/8″ (.688 x 1.75 | x | x |
| x .134) | ||||
| 17 | 04001-41 | Hex Head Bolt, 5/8-11 x | x | x |
| 9-1/2″ | ||||
| 18 | 461023 | Caster Assembly | x | x |
| 19 | 484368 | Cap, Spindle | x | x |
| 20 | 04017-16 | Capscrew, 5/16-18 x 3/4″ | x | x |
| 21 | 461844 | Discharge Chute 48V | x | |
| *462473 | CA Discharge Chute, 48V | x | ||
| *425619 | Turbo Baffle, 48V | x | ||
| 461845 | Discharge Chute 52V | x | ||
| *462475 | CA Discharge Chute, 52V | x | ||
| *424211 | Turbo Baffle, 52V | x | ||
| 22 | 04021-10 | Nut, 5/16-18 Elastic Elastic | x | x |
| Stop | ||||
| 23 | 04001-11 | Bolt, 5/16-18 x 1-1/2″ Hex | x | x |
| Head | ||||
| 24 | 462394 | Belt Cover (Incl. decals) | x | |
| 462395 | Belt Cover (Incl. decals) | x | x | |
| 25 | 04043-04 | Flat Washer, 3/8″ Special | x | x |
| 26 | 04029-03 | Wing Nut, 3/8-16 (Large) | x | x |
| 27 | 04110-03 | U-Nut, 3/8-16 | x | x |
| 28 | 48926 | Tapered Hub | x | |
| 29 | 04001-172 | Bolt, 1/4-20 x 1″ Hex Head | x | x |
| Grade 8 | ||||
| 30 | 04020-09 | Nut, 5/8-11 Hex | x | x |
| 31 | 482748 | Pulley, Double | x | |
| 32 | 48087 | Belt, RH Blade Drive | x | |
| 48285 | Belt, RH Blade Drive | x | ||
| 33 | 48089 | Belt, Blade Drive | x | |
| 483518 | Belt, Blade Drive | x | ||
| 34 | 04021-05 | Nut, 3/8-16, Nut Centerlock | x | x |
| 35 | 04019-04 | Nut, 3/8-16, Serrated Flange | x | x |
| 36 | 04021-09 | Nut, 3/8-16 Elastic Stop | x | x |
| 37 | 04004-02 | Bolt, 5/16-18 x 1″ Hex Head | x | x |
| 38 | 04001-09 | Bolt, 5/16-18 x 1″ Hex Head | x | |
| 39 | 04017-37 | Cpscrw, 1/2-13 x 1-1/4″ Ser. | x | x |
| Flg. HH | ||||
| 40 | 04117-04 | Nut, 1/2-13 Flange El. Stop | x | x |
| 41 | 04021-04 | Hex Nut, 5/16-18 Center | x | x |
| Locknut | ||||
| Ref. No. | Part No. | Description | 48 | 52 |
| --- | --- | --- | --- | --- |
| 42 | 44078 | J-Hook, 48V J-Hook, 52V |
Idler Pulley, “V” Groove Flatwasher, 5/16″
Idler Arm Assy. (Incl. 62) Pad, Deck Wear
J-Rod, Idler Pulley Spacer, J-Rod
Washer, 3/8 x 1-1/2 x 16 ga. Bolt, 3/8-16 x 2-1/2″ Hex Head
Seal, Cutter Spindle
Idler Arm Assy (Includes 62) Spacer, J-Rod
Reiief Fitting, Cutter Spindle Spacer, Outside, Cutter Spindle
Spindle Bushing Nut, Cutter Spindle Knob, w/stud
Bolt, 3/8-16 x 3-3/4″ Hex Head
Idler Pivot
Idler Pulley, Belt Clutch Bearing
Bolt, Carriage 5/16-18 x 3/4″ Guide Roller
Roller Shaft
Seal, Cutter Spindle Spring, Chute Return Baffle Weldment 48V Baffle Weldment 52V Bolt, 3/8-16 x 3-1/4″ Hex Head
Bolt, Carriage 3/8-16 x 1″ Heatshield
Nut, Hex Lock 5/16-18 Lock Washer 5/16″ Dust Shield
Bolt, 3/8-16 x 2-3/4″ Hex Head
| x|
| 43028| | x
43| 48181| x| x
44| 04040-04| x| x
45| 461091| x| x
46| 483176| x| x
47| 43028| x| x
48| 43077| x| x
49| 04041-12| x| x
50| 04001-31| x| x
51| 481024| x| x
52| 461841| x| x
53| 43277| x| x
54| 48677| x| x
55| 43312| x| x
56| 43297| x| x
57| 481035| x| x
58| 481625-01| x| x
59| 04001-51| x| x
60| 43681| x| x
61| 483215| x| x
62| 48224| x| x
63| 04003-12| x| x
64| 482295| x| x
65| 45944| x| x
66| 481025| x| x
67| 483378| x| x
68| 424839| x|
| 424840| | x
69| 04001-62| x| x
70| 04003-23| x| x
71| 424661| x| x
72| 04021-22| x| x
73| 04030-03| x| x
74| 424367| x| x
75| 04001-22| x| x
CASTER ASSEMBLY
| Ref. No. | Part No. | Description |
|---|---|---|
| 1 | 04066-01 | Quick Pin |
| 2 | 43037-01 | Spacer, Spacer Yoke, 1/2″ Long |
| 3 | 48100-01 | Bronze Bearing |
| 4 | 48114-04 | Greasing Fitting |
| 5 | 45101 | Support Assembly |
| 6 | 45006 | Caster Yoke |
| 7 | 04021-07 | Nut, Elastic Stop 1/2-13 |
| 8 | 43022 | Sleeve, Caster Wheel Bearing |
| 9 | 04001-37 | Bolt, Hex Head 1/2-13 x 5-1/2″ |
| 10 | 483047 | Caster Wheel Assy. (Incl. #11, #12, #13) |
| 11 | 48114-03 | Grease Fitting, 45 Degree 1/4-28 |
| 12 | 481770 | Retainer, Caster Wheel Bearing |
| 13 | 481769 | Roller Bearing, Caster Wheel |
ENGINE DECK
Ref. No.| ****
Part No.
| ****
Description
---|---|---
1| 485014| Engine, Kawasaki 14FS (FS481V)
| 485015| Engine, Kawasaki 15FS (FS541V)
2| 48030-09| Cable Clamp
3| 481580| Transmission, 5-speed
| | (Peerless 700-070, 9 tooth spline)
4| 48231| Neutral Safety Switch
5| 48122-01| Fibre Washer, thin
5A| 48122-02| Fibre Washer, thick
6| 481581| Coupler, Jackshaft
7| 48114-05| Grease Fitting, straight 1/4-28
8| 481582| Jackshaft (fits SW32,36,48& 52)
9| 04063-09| Key, Hi-Pro #9
10| 04017-16| Bolt, 5/16-18 X 3/4″ Hex Head
11| 43085| Wheel Axle (SW36,48 & 52)
| 43104| Wheel Axle (SW 32)
12| 484620| Muffler – Kawasaki
13| 04001-08| Bolt, 5/16-18 X 3/4″ Hex Head
14| 422533| Backing Plate
15| 04030-04| Lock Wshr. 3/8″
16| 04019-04| Nut, 3/8-16 Serrated Flange
17| 462285| Engine Deck (fits SW32)
| 462286| Engine Deck (fits SW36,48 & 52)
18| 424620| Plate, Clutch Bracket
19| 04019-03| Nut, 5/16-18 Serrated Flange
20| 04001-51| Bolt, 3/8-16 x 3-3/4″ Hex Head
21| 461397| Electric Clutch (Ogura)
22| 04041-07| Washer, 3/8″ (.391 x .938 x .105)
23| 48197| Pulley, Transmission Input
24| 04063-07| Key, Woodruff #9
25| 04050-09| Retaining Ring, 5/8″ Ext, Basic
26| 48203| Belt, Transmission Drive
27| 483208| Idler Pulley, Transmission
28| 481666| Pulley, Traction Drive
Ref. No.| ****
Part No.
| ****
Description
---|---|---
29| 04063-19| Key, 1/4 x 1/4 x 3/4″
30| 04041-28| Flat Washer, 7/16″ Special
31| 04030-05| Lock Washer, 7/16″
32A| 04102-04| Bolt, 7/16-20 x 2-1/2″ Hex Head
32B| 04103-03| Cpsrw, M10-1.5 x55 Metric Hex Hd
33| 04001-12| Bolt, 5/16-18 x 1-3/4″ Hex Head
34| 04002-06| Bolt, M8-1.25 x 16
35| 04021-09| Nut, 3/8-16 Elastic Stop
36| 04040-15| Flat Washer, 5/16″
37| 040001-32| Bolt, Hex Head 3/8-16 x 1-1/4″
38| 48192| Wheel Assembly (incl. 38A-38B)
| | (fits SW36,48,52)
| 48253| Wheel Assembly (Incl. 38C – 38D) (SW32)
38A| 481860| Tire, 13 x 6.50-6, 2-ply (fits SW36,48,52)
38B| 481859| Rim & Bearing Assembly (incl. 39)
38C| 481861| Tire, 13 x 5.00-6 2-ply (SW32 only)
38D| 481862| Rim Assembly (incl. 39) (SW32 only)
39| 481858| Wheel Bearing
40| 04042-05| Washer, 1-1/16 x 1-3/4 x 12 ga
40A| 04041-14| Washer, 1-1/16 x 1-1/2 x 18 ga
41| 04050-08| Retaining Ring, 1″ Ext.- “E”
42| 48200| Pulley, Wheel Drive
43| 43088| Spacer, Wheel Pulley
44| 48209| Brake Drum
45| 04017-19| Bolt, 5/16-18 x 1-1/2″ Serrated Flange
46| 04003-03| Bolt, 3/8-16 x 2″ Carriage
47| 04021-10| Nut, 5/16-18 Elastic Stop
48| 04003-04| Bolt, 5/16-18 x 1″ Carriage
49| 421370| Anti Rotation Bracket
50| 04031-03| Lock Washer External Tooth
51| 481716| Rubber Pad, Clutch Stop
52| 422534| Plate, Backing
HANDLE ASSEMBLY
Ref. No.| ****
Part No.
| ****
Description
---|---|---
1| 463097| Handle Assembly
2| 421360| Belt Guard
3| 04017-27| Capscrw, 3/8-16 x 1″ Serr. Flg.
4| 04041-07| Washer, 3/8″ (.391 x .938 x .105)
5| 04021-09| Nut, 3/8-16 Elastic Stop
6| 48755| Spring, Idler
7| 04001-10| Bolt, 5/16-18 x 1-1/4″ Hex Head
8| 04021-10| Nut, 5/16-18 Elastic Stop
9| 04017-05| Capscrew, 1/4-20 x 3/4″ Hex Head
10| 44140| Control Rod, Steering
11| 04062-02| Hair Pin, Small
12| 04001-23| Bolt, 3/8-16 x 4-1/2″ Hex Head
13| 43032| Swivel Joint
14| 04062-01| Hair Pin, Large .094 Dia.
15| 45847| Idler Bracket, RH
15A| 45846| Idler Bracket, LH
16| 43092| Idler Sleeve
17| 04001-62| Bolt, 3/8-16 x 3/4″ Hex Head
18| 04004-17| Stud, 3/8-16 x 5″
19| 04019-04| Nut, 3/8-16 Serrated Flange
20| 04019-03| Nut, 5/16-18 Serrated Flange
21| 04017-28| Cpscrw, 3/16-18 x 1-1/4″ Serr. Flg
22| 43286| Spacer
23| 48028-05| Cable Tie
24| 483160| Steering Lever
25| 04017-17| Capscrew, 5/16-18 x 1″ Serr. Flg.
26| 483142| Bushing
27| 04040-15| Washer, 5/16 (.375 x .875 x .083)
28| 483040| Spring, Operator Presence
29| 451915| Operator Presence Lever, LH
30| 451917| Operator Presence Lever, RH
31| 44005| Brake Rod
32| 45092| Brake Lever
33| 45093| Brake Link
34| 42254| Brake Link Plate
35| 04024-01| Nut, 3/8 Push-on
36| 48114-05| Grease Fitting, Straight 1/4-28
37| 04050-01| Retaining Ring, 5/8 Ext. “E”
38| 48210| Brake Band
39| 04001-45| Bolt, 3/8-16 x 2″ Hex Head
40| 04031-08| 1/4″ Internal Tooth Lockwasher
41| 04032-01| Socket Head Capscrew #8-32 x 1/2″
42| 04015-13| Socket Head Capscrew #8-32 x 1/2″
43| 461242| Neutral Latch, RH
43A| 461241| Neutral Latch, LH
44| 48202A| Belt, Wheel Drive
45| 483211| Idler Pulley, Wheel Drive
Ref. No.| ****
Part No.
| ****
Description
---|---|---
46| 482645| Pulley, Jackshaft (Inc. 47)
47| 04012-04| Setscrew, Hex Socket Knurl
| | Cup Pt. 5/16-18
48| 43098| Spacer, Jackshaft Pulley
49| 48223| Flange, Jackshaft Bearing
50| 48224| Bearing, Jackshaft
51| 04050-09| Retaining Ring, 5/8 Ext. Basic
52| 422279| Shift Lever
53| 04017-16| Capscrew, 5/16-18 x 3/4″ Serr. Flg.
54| 04001-17| Bolt, 5/16-18 x 2″ Hex Head
55| 04019-02| Nut, 1/4-20 Serrated Flange
56| 481839| Grip, Shift Handle
57| 424113| Bracket, Choke Mounting
58| 461163| Shift Lever Extention (incl. 56)
59| 04041-07| Washer, 3/8 (.391x .938 x .105)
60| 482314| Choke Control
61| 483161| Plug, Handlebar
62| 04020-14| Nut, 3/8-24 UNF
63| 04001-53| Bolt, 5/16-18 x 2-1/2″
64| 482547| Fuel Tank Cap
SW FUEL SYSTEM
| Ref. No. | Part No. | Description |
|---|---|---|
| 1 | 463283 | Fuel Tank Assembly (incl. #3, 4, 5, 6, 16, 17) |
| 2 | 484286 | Fuel Cap w/ Tether |
| 484297 | Fuel Cap w/Tethered – California Models Only (not shown) | |
| 3 | 484243 | Fuel Gauge Assembly (incl. #4) |
| 4 | 484242 | Seal, Fuel Gauge |
| 5 | 482571 | Bushing, .56 Dia. Viton |
| 6 | 486181 | Valve, Fuel Shutoff w/Screen |
| 7 | 48059-01 | Clamp, Fuel Hose |
| 8 | 483617 | Fuel Hose, 1/4″ ID (order by inch) |
| 9 | * | Fuel Filter |
| 10 | * | Clamp, Fuel Hose |
| 11 | * | Fuel Hose |
| 12 | 484347 | Hose, Vapor Recovery 1/4″ (order by inch) |
| 13 | 04030-03 | Lockwasher, 5/16″ Spring |
| 14 | 04001-09 | Bolt, Hex Head 5/16-18 x 1″ |
| 15 | 484287 | Carbon Canister |
| 16 | 484285 | Grommet, Viton, |
| 17 | 484333 | Fitting, Remote Vent |
| 18 | 484343-01 | Mender, 1/4 x 3/16 w/.02 Hole |
| 19 | 48030-11 | Clamp, 5/8″ Double |
| 20 | 484345 | Hose, Vapor Recovery 3/16″ (order by inch) |
| 21 | 04001-08 | Bolt, Hex Head 5/16-18 x 3/4″ |
| 22 | 48059-05 | Clamp, Vapor Recovery Hose 3/16″ |
| 23 | 48059-02 | Clamp, Fuel Hose 7/32″ ID |
| 24 | 04019-03 | Nut, Serrated Flange 5/16-18 |
| 25 | 452176 | Bracket, Canister Mounting |
| 26 | 48136-17 | Clamp |
| 27 | 04003-04 | Bolt, Carriage 5/16-18 X 1″ |
| 28 | 484279-01 | Tube, Fuel Tank Insert – 4″ |
INSTRUMENT PANEL
| Ref. No. | Part No. | Description |
|---|---|---|
| 1 | 48717 | Switch, Neutral Lock |
| 2 | 48946 | Throttle Control – Kawasaki |
| 3 | 485833 | Engagement Switch, Electric Clutch |
| 4 | 48609 | Key Switch |
| 5 | 484565 | Hour Meter |
| 6 | 04003-43 | Bolt, Carriage #10-32 x 1/2″ |
| 7 | 04021-26 | Nut, #10-32 Elastic Stop |
| 8 | 486118 | Handle Wire Harness, Manual Start |
| 9 | 462069 | Key Chain w/Keys |
| 483609 | Key w/Shroud | |
| NS | 48030-09 | Clamp, Wire Harness |
PEERLESS TRANSMISSION 700-070
FOR REFERENCE ONLY – ORDER PARTS FROM PEERLES
Ref. No.| Part No.|
Description
| REF. NO.|
NO.
| PART DESCRIPTION
---|---|---|---|---|---
1| 772083A| Case, Transmisson| 50| 778125| Spur Rear (35 teeth)
2| 780086A| Needle Bearing Grease Spec| 51| 778239A| Spur Gear (32 teeth-
steel)
2A| 780142| Needle Bearing| 52| 778124A| Spur Gear (30 teeth)
3| 770061A| Case, Transmission| 53| 778123A| Spur Gear (25 teeth)
8| 792089A| Shift Key| 56| 778145| Spur Gear (12 teeth-steel)
9| 784266| Shift Collar| 57| 778151| Spur Gear (15 teeth)
10| 784376| Shift Rod & Fork| 58| 778240| Spur Gear (18 teeth-steel)
11| 778154| Bevel Gear (42 teeth)| 59| 778126A| Spur Gear (20 teeth)
12| 778176| Bevel Pinion (14 teeth-steel)| 60| 778127A| Spur Gear (25 teeth)
20| 792077| Steel Ball, 5/16″ dia.| 65| 780139| Washer
21| 792078| Set Screw, 3/8-16 x 3/8″| 66| 776135| Input Shaft (3-11/16″ long)
22| 792079| Spring| 67| 776402| Shifter & Brake Shaft
24| 780071| Thrust Bearing| 71| 788069| Square Cut Ring
25| 792073| Screw, 1/4-20 x 1-1/4″ (6)| 72| 792074| Threaded Plug (Shipping
only, not used)
27| 792035| Retaining Ring| 81| 786081| Roller Chain (No. 41 chain, 24 links)
28| 788040| Retaining Ring| 82| 786082| Sprocket (9 teeth)
29| 780072| Washer (6)| 83| 786083| Sprocket (18 teeth)
30| 780108| Washer (5)| 90| 788067B| Grease (32 oz. bottle Bentonite grease)
32| 792001| “O” Ring| 150| 510334| Gasket Eliminator (Loctite #515)
34| 780105A| Flanged Bushing| 178| | Coupling (See page 26-27 for part
number)
49| 778146A| Spur Gear (37 teeth)| 179| | Connector Shaft (See page 26-27 for
part number)
WIRE HARNESSES
HANDLE WIRE HARNESS
Part No. 486118
SW ELECTRICAL SCHEMATIC – RECOIL START
(shown with Key off, PTO Off, Shift Lever in Neutral, OPC Disengaged)
REPLACEMENT DECALS AND INFORMATION PLATES
| Ref. No. | Part No. | Description |
|---|---|---|
| 1 | 483405 | Decal, Discharge Chute |
| 2 | 48314 | Decal, Scag Logo |
| 3 | 483407 | Decal, Danger-Spinning Blades |
| 4 | 483406 | Decal, Warning-Rotating Blades |
| 5 | 481971 | Decal, Heavy Duty Commercial |
| 6 | 48332 | Decal, Shift Index |
| 7 | 486117 | Decal, Instrument Panel – Rear |
| 8 | 485403 | Decal, Metalcraft – USA |
| 9 | 483404 | Decal, Sulky Attachment |
| 10 | 483402 | Decal, Belt Cover |
| 11 | 481483 | Decal, Instrument Panel – Front |
| 12 | 482816 | Decal, Height of Cut |
| 13 | 48315 | Decal, 32 |
| 482297 | Decal, 36 Advantage | |
| 14 | 483199 | Decal, 48 Velocity Plus |
| 483200 | Decal, 52 Velocity Plus | |
| 15 | 485368 | Decal, SW Replacement Parts |
| 16 | 485526 | Decal, Belt Routing – 32 & 36A |
| 485527 | Decal, Belt Routing – 48V & 52V | |
| 17 | 486136 | Decal, Scag Power Equipment (Fuel Tank) |
| ** | 461986 | Spanish Decal Kit, Walk-Behinds (Not Shown) |
| ** | 483900 | Decal, Warning Spark Arrest (Not Shown) – California Models Only |