Uten Ultrasonic Cleaner 600ml Ultra Sonic Jewellery Cleaner User Guide
- June 15, 2024
- Uten
Table of Contents
Uten Ultrasonic Cleaner 600ml Ultra Sonic Jewellery Cleaner
Product Information
Specifications
- Product: Ultrasonic Cleaning Machine
- Frequency: High-frequency
- Default Operation: 3 minutes of cleaning
- Automatic Stop: After continuous operation for 5 minutes, the machine stops for 3 minutes
- Buttons: ON, OFF, RESET
Product Usage Instructions
Button Functions
- ON: Start button. Initiates the cleaning process for 3 minutes by default.
- OFF: Turn off button. Stops the machine.
- RESET: Time reset button. During the cleaning process, pressing this button resets the working time to 3 minutes again. Note that this button does not respond when the machine is running or in shutdown protection mode.
Cleaning Process
- Ensure the machine is properly plugged in and has power.
- Open the lid by following these steps:
- Press the middle of the fuselage with your left hand.
- Push it back slightly.
- Lift the cover-up with your right hand at the same time.
- Place the jewellery or objects to be cleaned inside the machine.
- Close the lid securely.
- Press the ON button to start the cleaning process. The machine will operate for 3 minutes by default.
- If you wish to extend the cleaning time, press the RESET button during the cleaning process. This will reset the working time to 3 minutes again.
- After the cleaning cycle is complete, press the OFF button to stop the machine.
- Open the lid and remove the cleaned items from the machine.
FAQ (Frequently Asked Questions)
- Q: The jewellery items remained tarnished even after following the instructions. What should I do?
- A: After wearing jewellery for a long time, the oil from the human body can be secreted onto the surface of the jewellery. The cleaning machine is designed to soften and decompose the grease on the surface of objects. While it may remove oily shine, it might not significantly enhance the brightness of jewellery with surfaces that are not particularly smooth or reflective.
- Q: The machine doesn’t turn on. What could be the issue?
- A: If the machine doesn’t turn on, it is possible that internal components were damaged during shipping. We recommend replacing the machine.
- Q: The machine doesn’t clean my jewellery effectively. I’ve tried multiple times. What should I do?
- A: The ultrasonic cleaning machine can effectively clean soft dirt. If you find that it is not cleaning your jewellery as expected, please ensure that you are following the usage instructions correctly. If the issue persists, please contact our customer support for further assistance.
- Q: Can I use the machine for old and delicate jewellery?
- A: While the ultrasonic cleaning machine can clean soft dirt, it may not be suitable for old and delicate jewellery. We recommend exercising caution and consulting with a professional jeweller before using the machine on such items.
Using Instructions
The figure below is the instruction of the three buttons of the product.
Solutions to Common Problems Please refer.
| Customer complaints description: | Answer |
|---|
Worked for 5 minutes and not working since.
| The ultrasonic cleaning machine is a high-frequency product. To ensure the safety of users, a protection program is set by default to automatically stop for 3 minutes after continuous operation for 5 minutes.
The buttons on the front have stopped working
| This ultrasonic has only 3 buttons:
1. ON, Start button, cleaning for 3 minutes by default.
2. OFF, Turn off button, turn off the machine.
3. RESET, Time Reset, delay the cleaning time to 3 minutes again during the cleaning process, press this button when the machine is running, there is no response
4. If the machine runs continuously for 5 minutes, it will enter a 3-minute shutdown protection state, and the buttons will not respond.
If the customer’s problem does not belong to the above situation, it may be an internal failure of the machine, and it is recommended to replace it.
The timer button does not work.
| This ultrasonic has only 3 buttons:
1. ON, start button, cleaning for 3 minutes by default.
2. OFF, turn off button, turn off the machine.
3. RESET, time reset, delay the cleaning time to 3 minutes again during the cleaning process, press this button when the machine is running, there is no response.
The rest button not working
| The RESET button is not a rest button,
RESET is the reset button. During the cleaning process, the machine will be reset to 3 minutes of working time. When the machine is not running or when it is shut down for protection, there is no response when pressing this button.
When plugged in, no power
| This problem may be caused by internal components that were damaged during shipping. Replacement is recommended.
I cannot open the lid
| The cover has a card slot. You can press the middle of the fuselage with your left hand, push it back slightly, and lift the cover with your right hand at the same
time.
The reset button doesn’t work
| RESET, reset button, reset the machine to 3 minutes working time during the
cleaning process, press this button when the machine is not running or
shutdown protection, there is no response
Customer complaints description:| Answer
---|---
Followed the instructions very carefully, but the jewellery items remained tarnished.
| After wearing jewellery for a long time, the oil of the human body will be secreted onto the surface of the jewellery. The cleaning machine softens and decomposes the grease on the surface of the object. So the oily shine on the product will disappear. If the surface of the jewellery is not particularly smooth, it will reduce the reflection and make it not particularly bright.
Doesn’t turn on.
| This problem may be caused by internal components that were damaged during
shipping. Replacement is recommended.
It doesn’t work. I tried it on a pair of earrings for half an hour and they
look the same as before.|
1. The ultrasonic cleaning machine can clean soft dirt on the surface of the jewellery, such as grey layer, dander, hair, etc.
2. Ultrasonic cleaners cannot clean hard dirt on the surface of jewellery, such as oxidized rust stains, paint, etc.
3. It is recommended to add a jewellery cleaning agent to clean the jewellery. After cleaning, it will be better to wipe with a soft cloth.
I tried this multiple times and it is useless and does not clean my jewellery
Cannot use it for my jewelry which is old and delicate.
Tried with some jewellery and put on multiple cycles, still came out the same.
Unfortunately, it isn’t clean. Tried jewellery and earplugs
Bought this product to clean my jewellery as advertised in the pictures and
description. I have tested this on arrival and it has made no difference my
jewellery looks the same the product has not worked
I ordered it to clean my jewellery. I was very disappointed, it didn’t do
anything at all. I tried with cold water, warm water, dishwasher liquid, soda
and silver cleaning solution. None worked.
Customer complaints description:| Answer
---|---
I gave it as a gift to clean my glasses. Huge inconvenience to use and doesn’t
do a very good job at the intended task.|
1. The ultrasonic cleaning machine cleans out the sundries on the surface of the glasses and in the cracks through high-frequency vibration.
2. The skin oil on the glasses needs to be cleaned with a glasses cleaner. Add different amounts of cleaning fluid and set different cleaning times according to the degree of dirt on the glasses.
3. Wipe with a soft cloth after cleaning.
4. The rust on the glasses cannot be cleaned.
DOES NOT FIT A PAIR OF SPECTACLES IN CLEANING TRA•
Purchased to clean my glasses, didn’t do a great deal.
There’s no visible result.
|
1. According to the degree of dirt of the cleaning items, pour the cleaning solution in proportion and choose different cleaning times to achieve a better cleaning effect.
2. Selection of cleaning agent: The choice of cleaning agent for an ultrasonic cleaning machine is the key to the effect of ultrasonic cleaning. According to the different properties of the objects to be cleaned, different types of cleaning agents should be selected.
3. The ultrasonic cleaning machine can remove the dust on the surface of the object and soften the dirt and grease, but it cannot make them disappear 100%. After cleaning, it needs to be wiped with a soft cloth to wipe off the loose and softened dirt attached to the surface of the object.
4. The rust cannot be removed.
Did not clean as described
It does not work! If you want to stand over it for ages watching it as it
does nothing at all then this is the one to buy!!!
Or does nothing but make noise. No dirt was removed.
Doesn’t clean at all. Doesn’t do the job intended
Did not perform to the level I was expecting, didn’t notice any cleaning or
improvements to the items inside even after a couple of washes.
Does not appear To be clean the way I thought it would
Has not lived up to what it says
Doesn’t clean very well
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>