FeeTUO 2007-2024 Soft Roll Up Tonneau Cover Installation Guide

FeeTUO 2007-2024 Soft Roll Up Tonneau Cover

Product Information

Specifications

• Model: z^ZZZZZZZ
• Color: zWZZZZZZ
• Dimensions: 3DJH
• Weight: ),1,6+7+(,167$//$7,21
• Power: zdZZZZZDZZ ZZZZ

Product Usage Instructions

Setup

1. Unbox the product carefully.
2. Check that all components are included.
3. Refer to the manual for assembly instructions.

Operation

1. Connect the power cable to a suitable power source.
2. Turn on the product using the power button.
3. Adjust settings as per your requirements using the control panel.

Maintenance

1. Regularly clean the product with a soft, damp cloth.
2. Avoid using harsh chemicals for cleaning.
3. Refer to the manual for any specific maintenance tasks.

FAQ

Q: How do I troubleshoot if the product doesn’t turn on?
A: Check the power connection and ensure it is securely plugged in. If the issue persists, contact customer support.

Q: Can I use this product outdoors?
A: This product is designed for indoor use only and should not be used outdoors.

PARTS LIST

ASSEMBLY INSTRUCTION

1. Clean truck bed thoroughly before installation.

   • Stick the supplied front seal strip on the front bed rail by aligning with the outer edge.
   • Install the provided LED lamps according to the actual situation of the truck bed.

2. Insert Side Rails (L&R) into the front rail of the front end. Make sure the Side Rails are parallel and all placed on the bed rails. And checkthat the reserved positions of Side Rails and bed Rails are the same.
   ATTENTION!

   • MAKE SURE THE SIDE RAIL LINES UP WITH THE INNER EDGE OF THE TRUCK BED RAIL. PLACE THE SIDE RAILS EVENLY SO THAT THE DISTANCE BETWEEN THE REAR ENO OF THE SIDE RAIL TO THE TAILGATE IS THE SAME ON BOTH SIDES.

3. Slide the front clamp to the best position, clamp the interface under the metal bed rail point, and then use the Triangle screw to rotate into the metal rod to fix the entire clamp

4. Untie the spring cords on both sides of the bed cover and unfold the bed cover to ensure correct and neat coverage of the entire lathe

5. Snap the tail lock into the lock groove of the side rails as shown

6. Press down to close the cover and the lock will automatically clamp.

FINISH THE INSTALLATION

• Tighten the velcro on both sides of the bed cover. Make the cover more docile and overall, and finally complete the installation.

NOTE: COVER MAY NOT COMPLETELY COVER TO THE OUTSIDE EDGE OF THE BED RAILS DUE TO SLIGHT DIEFERENCE IN TRUCK BED SHAPE FOR DIEFERENT YEAR MODELS

Open the tailgate, pull down the rope, and the lock will automatically open.

Roll up the tarp and buckle the spring cord to enjoy plenty of bed space.

• There is a scale label on the tail of the side rail. If you find that the bed cover tarp is loose, you can move the tail lock backwards according to the situation. Will make the tarp tighter.

SPECIAL INSTRUCTIONS FOR ALTERNATIVE BRACKETS SUPPLEMENT TO INSTALLATION INSTRUCTIONS (Only for models with system track)

1. Slide aluminum blocks into track from the front
2. After moving to the right position,snap on the F-clipt
3. Fixed two screwst
4. Complete the installation

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>