JideTech AC18PRO PTZ IP Camera User Manual
- May 15, 2024
- JideTech
Table of Contents
JideTech AC18PRO PTZ IP Camera
[Part 1: Connect and manage cameras using mobile APP]
Please go google play or Apple store download the mobile APP, the name is
AC18Pro, and install it on your mobile phone The first time you run the APP,
you need to register an account. You can use your email or mobile phone number
to register an account, and then use the registered account to log in to the
APP.
INSTALLATION INSTRRUCTION
Configure the camera using WIFI
- If your camera has a WIFI function. Before connecting the power adapter of the camera, please make sure that the LAN port of the camera is not connected to the Ethernet cable (if you have connected it, please disconnect it and press the reset button for 5 seconds to restore the camera to factory settings). After connecting the power, wait 10 seconds.
- Before using the mobile APP to configure the camera, please connect your mobile phone to your WIFI router via WIFI.
- Open the APP and click the Add button to add a camera (as shown in Figure 1). And select WIFI (as shown in Figure 2), the software will automatically obtain the WIFI of the mobile phone, and please enter the WIFI password (the WIFI connection password of the wireless router). Click Next (as shown in Figure 3)
After entering the interface of Figure 4, wait for a few seconds, the APP will
automatically enter the interface of Figure 5, and the camera will start to
match the code through sound waves. When you hear a “di” on the phone, it
means that the camera is successfully connected to your wireless router via
WIFI (as shown in Figure 6). If your camera does not have a microphone and a
speaker at the same time, the sound wavecode matching cannot be completed, but
you can also add the camera after aligning the QR code on the phone screen
with the camera lens. Click the camera on Figure 7, and you will enter the
camera’s monitoring and management interface (as shown in Figure 8). The
camera has been added successfully
Add a camera by scanning a QR code
If your camera does not have WIFI function, please connect the ethernet cable
to your switch/router and connect the power adapter. Select “Wired connection
camera”, as shown in Figure 9, enter the interface of scanning the QR code to
add a camera, point the mobile phone at the QR code on the camera body to scan
(as shown in Figure 10), after scanning is successful, please provide your
Customize a name for the camera, and click “BIND IT” to complete the addition
(as shown in Figure 12)
Add cameras via LAN connection
If the QR code cannot be found on the camera, you can click “Click here to add
a device” to add the camera through the LAN search (as shown in Figure 12),
enter the search page, and the APP will automatically search for the camera,
as shown in Figure 13 display, and then click the camera to complete the
addition.
How to Turn on/off auto humanoid Tracking
- Control the PTZ button to rotate the camera to your desired position (set a Return position)
- Switch the PTZ control interface to the preset position setting interface.
- Input 88, Then click the “Set” button. The tracking return position(Home position) set successfully
- Click “More” to enter the preset Call Interface
- Input 97 and click”Call”, The camera will auto-turn one humanoid Tracking
- Click the “config preset” button to enter the preset set interface. Enter 96, then click “Set”, the tracking will be turned off.
- Cruise tracking:
Before turning on tracking, you need to set the camera’s cruise point in advance. A maximum of 16 preset points can be set. These cruise points are the few locations you want to monitor. The camera will cruise back and forth between these locations to find a tracking target. Made a camera monitor multiple angles of demand. Turn on the cruise tracking function, The camera will cycle moving through the preset cruise points. When the person is detected, the camera will turn on the tracking. After the tracking is completed, the camera automatically resumes the cruise until the next time the person is detected, the tracking is turned on again Set 1,2,3,4….max 16 preset position, Then call 98th preset camera will auto turn on cruise tracking. Setting method: [98]+[Call] for turn on cruise
Add and manage cameras using PC software
Install the search tool on your PC
- Run” AjDevTools_V5.1.9_20201215.exe” and complete the installation
- Run the software, as shown below（4）
- Here you can modify the IP address of the camera, upgrade the firmware and other parameter settings. Right-click on the IP address to open the camera with a browser, as shown in figure 5.
- Enter the browser login interface, login user name: admin, password: 123456, as shown in the following figure (if the browser prompts you to download and install the plug-in, please download and install it): Then click login，as shown in the figure 7
Use PC software to search and add cameras
-
Install the LMS computer software.
The software supports English, Simplified Chinese, and Traditional Chinese (if you want to support other languages, we can provide you with language packs, you can translate into the language you want, and then we can provide you with software customization) -
Follow the prompts to complete the software installation
-
Run the LMS software:user: admin,password:123456 Click LOGIN to log in to the software
-
Search and add cameras. Click “Devices>”” Start Search”>click“3”>add >successfully added， as shown in figure 10 Then click” ” go to Liveview, as shown in figure 11 Double click on the IP address and the video will automatically appear in the video box on the right.
Preview and control cameras with AC18PRO PC software
- Double-click the AC18PRO software in the directory, follow the prompts to complete the installation of the camera, and then run the camera.
2,run and log in to AC18PRO, The username and password here are the account
you registered for the first time on your mobile phone. Click login button go
to AC18PRO You will see all the cameras under your account, you can preview
the cameras and view the video playback in this way