JideTech 1080P HD Ptz Security Ip Camera Instruction Manual

HD PTZ SECURITY IP CAMERA
PRODUCT MANUAL

Please read his manual carefully before using this product nd keep it for fetuin

Company Info

Shenzhen Jide Tech Development Co, Ltd. is a technology company integrating R&D, design and manufacture of security products. We sell our products to North America, Europe, Southeast Asia, Africa, South America and other countries and regions. Our products cover outdoor security for home use Cameras and indoor security cameras, as well as more professional high- performance cameras used in government, banks, roads and other public places, the product types can be roughly classified into: dome camera, dome camera, bullet camera, NVR camera set, solar camera and 4G cameras; our products are loved by consumers in every country and region.

Installation Guide

Ceiling Mount

1. Loose the screws and rotate the base to the position of the arrow and remove it from the tail line.
2. Mark the position of the screw holes with a pen to determine the position of the mounting screw holes on the ceiling.https://www.youtube.com/watch?v=liaw-XzwIZI
3. Drill the holes in the determined position and drive the expansion screw into it.
4. Insert the base into the tail line and lift it with the camera, then insert the screw into the expansion screw.
5.  Place the three rounds at the bottom of the PTZ camera at 1,23 and then turn left to the Far left.

Wall Mount

1. Place the camera in a fixed position first, and mark the screw hole with a marker, use a tool such as a drill to drill holes in the marked screw holes.https://www.youtube.com/watch?v=liaw-XzwIZI
2.  After screwing the hole, insert the plastic expansion bolt into the screw hole.
3. Loosen the 3 screws used to fix the camera.
4. Align the screw hole on the bottom of the camera bracket with the hole on the wall screw in the screw to fix the camera bracket.
5. Tighten the 3 screws used to fix the camera, the installation is completed.

Camera APP Download and Installation

1. Scan the GR code to download “Video Link” APP.http://app.icamra.com/app/downloads/videolink/index.html
2. Apple Store / Google Store type “Vide link’ and search.
3. Sign up for an Account.
   Sign up an APP account by using a email address.

WiFi Connection

Note: Only Wi-Fi-connected surveillance cameras are supported.

http://app.icamra.com/app/downloads/videolink/index.html

1. When connecting for the first time, whether it is a WiFi connection or a PoE connection, the mobile phone needs to connect to the Local router WIFI.
2. Make sure that the mobile phone and the camera are in the same local router WIFI network, so that the mobile phone can connect to the camera.
3. The WIFI camera only supports a 2.46 network.
4. In order to have a more stable network environment, please configure the camera within 5 meters of the router.
5. When making a wifi connection, please make sure that no ethernet cable is connected to the camera’s LAN port. If it is already connected, disconnect it and press the reset button for 5 seconds to restore the camera to the factory settings. After switching on  the power, please wait for 10-15 seconds before making a WiFi connection.
   1.  Click the VideoLink” APP.
   2. Click on ( ADD NEW > Wi-Fi > “Connect to the local router’s WiFi” > NEXT > I’ve heard the prompt).
   3. Camera scanning GR code or acoustic connection. A Di” sound on your phone indicates that the camera has successfully connected to your wireless router via WIFI. If your camera does not have a microphone, sonic code matching cannot be completed, but you can as add 3 cambers alter aligning the OR code on your phone screen with the camera ends’
   4. After the QR code is successfully scanned, a *beep” sound will be issued, and the camera will start to configure the network.
   5. After the network configuration is completed, the connection is complete.

Note: Sound wave connection: when the QR code appears, there is no need to point the QR code at the camera, just turn on the speaker of the phone to half the volume, put the phone next to the camera, and wait for the camera to automatically connect. If the  sound ‘Wave connection is unsuccessful, please reset the camera, and then use the camera to scan the QR code to add

POE Connection / Network Connection

Note: Only for products that support POE/Network cable connection.
And surveillance camera with a WiFi connection with a network interface, supports network cable connection.

1. POE Connection: It is necessary to directly supply power and network to the camera through the network cable from the POE switch (not included in the package), and it does not need to be connected to the power supply to avoid burning the camera due
   to excessive voltage.

2. Network Connection: Use a network cable to connect the router to the network port of the camera, and need to connect to the power supply so that the camera is in the LAN, but does to need a PoE switch to avoid excessive voltage and burn the camera.

3. Make sure that the router connected to the camera and the WIFI connected to the mobile phone must be on the same LAN, otherwise, the connection will not be successful.
   1. Click the “Video Link” APP.
   2. Click on ( ADD NEW » Wired connection > “Scan the GR code of the camera”

   ’BIND IT*)
   3. After bind the camera, the connection is successful.

One more connection way
If you can’t find the QR code on the camera, you can click “No QR code? Click here to add a device™ toads a camera through LAN search, the app will automatically search for the camera and then click on the camera to finish adding it.

Notes on WiFi connectivity and POE connectivity
In the process of connecting the camera, if the connection is unsuccessful, please reset the camera and connect it again. It may slbe unsuccessful in the process of connection, reset and connect several times in succession operation, because the movements will keep identifying and adding when analyzing the local network, in there will be an unsuccessful connection, please reset several times, and the camera will identify the network well and connect soon.

APP Operation

poor)
| Screen Flip and Zoom Mode| Image horizontal/vertical flip (used in specific scenes)
| Horizontal Screen| Switch to multiple camera view
| PTZ Control| Move up, down, left, and right
| Zoom| Adjust Zoom+ and Zoom-
| Focus| Adjust Focus+ and Focus-
| Iris| Adjust Iris+ and Iris-
| PTZ speed| Speed in1-10
| PRESET| Set key monitoring locations
| SENIOR| Tracking, Cruise, Area Scan
| Speaker| Send voice message to camera
| Alarm| Alert through the camera’s speaker
| Alarm center| record the the humanoid detection screenshot
| Playback| See the camera record
| Setting| More camera setting
| Share| Share the camera with other users
| Alerts| Turn on the alarm button
| More| Rename, Set, Delete
| View more| View more
| Account Information| Account name and affiliation, etc
| Alarm push (Global)| Open message push
| Photo album| View screenshot photos
| My OR code| Being used to share the camera
| Feedback| Suggest a path
| About| Information about the app version

APP Setting

DEVICE SETTING:

SA| Audio, video, light control
Alarm Push| Alarm Push switch and Human detection setting
Record & Storage| Cameras record and Storage
PTZ Direction| Change the direction of horizontal and vertical camera movement
WiFi List| Show the nearby WiFi
Lock-in Time| The phone’s time and time zone will be synchronized to the camera
APP Setting Reset| APP settings are restored to factory settings
Reboot Device| Camera reset
Network Settings| MTZ value 1480 Range(1400-1500)
https://www.youtube.com/watch?v=Iqz0uONzw1Y| https://www.youtube.com/watch?v=FbffKGMj0I4| https://www.youtube.com/watch?v=-XF4J-t7muo
---|---|---
Video Link APP Feature Settings| Video Link LMS Client Operation Video| Video Link IE Web Page Operation Video

FAQ

Qt: Is the device not online?
A1 1) The router disabled MAC address and IP address filtering
2) If it is a dual-band router, it needs to use 2.4GWi-Fi and does not support SG Wi-Fi.
3) Wi-Fi account password only contains numbers and letters, no horizontal characters and other special characters are allowed.
02: How to add the camera to the third party software
A2 Please use the on if protocol and modify the server port to 80
03: RTSP Path Example:
A3: Main stream: rtsp://admin:123456@IP/stream0 Sub stream: rtsp://admin:123456@IP/stream1
Q4: Unable to watch the playback video correctly
A4: 1) Synchronize the time zone in the app
2) Check whether the status of the memory card is normal and try another memory card
3) If still no help. Please contact our support email to get the new firmware

24H Technical & Installation Support
WhatsApp: +86 189 2933 7423
Email: support@jidetech.com
https://www.jidetech.comhttps://wa.me/qr/XJZXSMVJBUC7J1

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>