ZEBOZAP ZZTVA2044 Drill Full Motion Outdoor TV Mount Instruction Manual
- May 15, 2024
- ZeboZap
Table of Contents
ZEBOZAP ZZTVA2044 Drill Full Motion Outdoor TV Mount
Product Specifications:
- Product Name: Outdoor Post TV Mount
- Model: ZZTVA2044
- Compatible VESA Patterns: 200×200, 300×200, 400×200, 300×300, 400×300, 400×400
- Weight Capacity: 9-10 lbs
Product Usage Instructions
Mount Assembly:
- Identify parts A, B, C, D, and E as per the manual.
- Feed both ratchet straps through the slots in part D.
- Refer to the top and side views to correctly position parts.
TV Mount Installation:
- Use the provided screws M-A, M-B, M-C, M-D, M-E, M-F, M-G, M-H, M-I according to the manual.
- Unlock the safety lock before installation and click to secure the TV mount.
- Follow the sequence indicated in steps 3 to 8 for proper installation.
Adjusting Display Position:
If the display does not stop at your desired position, tighten the screws as shown in the manual.
Frequently Asked Questions
Q: What is the weight capacity of the Outdoor Post TV Mount?
A: The weight capacity of the mount is 9-10 lbs.
Q: How do I adjust the display position if it doesn’t stop at the desired point?
A: Tighten the screws as shown in the manual to adjust the display position.
Q: How can I contact support for further assistance?
A: You can contact support at 226-741-0060 or email at info@zebozap.com. Visit zebozap.com for more information.
Read the entire instruction manual before you start installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.
CAUTION: Use with products heavier than the rated weights indicated may result in instability causing possible injury.
- Please closely follow the assembly instructions. Improper installation may result in damage or serious personal injury.
- Safety gear and proper tools must be used. This product should only be installed by professionals.
- This product is designed to be installed on solid concrete walls, masonry walls or wood stud walls.
- Make sure that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
- Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
- This product contains small items that could be a choking hazard if swallowed. Keep these items away from children.
- This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, contact your place of purchase for a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at least every three months).
CONTENTS
INSTALLATION
TO MAKE ADJUSTMENTS AFTER INSTALLATION
TV too high? Too low? Not centered? No problem!
HOW TO ADJUST THE POSITION OF THE COLUMN MOUNTING BRACKET
CAUTION:
Do not adjust the column mounting bracket while the TV is mounted
a. To release the strap pull, and hold the lever towards the handle, then
rotate the handle all the way to position C.
b. Move your column mounting bracket to the new desired position and tighten.
Need Help? Contact our pros: