WITMYA B0C89JT6YQ Medicine Cabinet Instruction Manual
- May 15, 2024
- WITMYA
Table of Contents
WITMYA B0C89JT6YQ Medicine Cabinet
Specifications
- Medicine Cabinet X1
- Shelf X2
- Wall Anchor X4
- Mounting Screw X4
- Dimensions: 20 in. (W) X 28 in. (H) X 5 in. (D)
- Shelf Dimensions: 17-3/10 in. (W) X 22 in. (H) X 3-1/2 in. (D)
Installation Instructions for Recess-Mount:
- Identify the appropriate location for installation on the wall.
- Ensure the wall is capable of supporting the weight of the cabinet.
- Mark the positions for the wall anchors and mounting screws.
- Securely attach the wall anchors using appropriate tools.
- Hang the cabinet on the wall anchors and secure it with mounting screws.
Cabinet Usage
- Open the cabinet door carefully.
- Place your medical supplies or personal items inside the cabinet.
- Adjust the shelves to accommodate different items.
- Avoid overloading the shelves beyond the recommended weight capacity.
Maintenance
Regularly clean the cabinet with a mild detergent and damp cloth to keep it
looking new.
Frequently Asked Questions (FAQ)
Q: What is the weight capacity of the shelves?
A: The shelves are designed to hold up to 10 lbs each.
Assemble Instruction
List of Parts
Tools Needed
Rough Wall Opening
| Overall Size | Rough Wall Opening |
|---|---|
| 20 in.(W) X 28 in.(H) X 5 in.(D) | 17-3/10 in.(W) X 22 in. (H) X 3-1/2in. (D) |
Use a 1/4 in. (6 mm) drill bit for drywall anchor installation. Use a 1/8 in. (3mm)drill bit for direct stud installation. NOTE: If installing into a material other than drywall or into stud, consult a professional for proper installation.
INSTRUCTIONS FOR RECESS-MOUNT INST LL TIONS
INSTALLATION of CABINET
-
Carefully remove all packing material. Place shelves and hardware aside until needed.
-
Determine desired location of cabinet on wall. Mark wall to show wall opening size. Generally, the recommended height to the center of the cabinet is 64″ from the floor. Fig. 1
-
CAUTION: Wall studs, plumbing or electrical lines that interfere must be removed or relocated. Cut wall opening, being careful not to damage the surrounding wall surface. Insert framing to support all plasterboard edges
-
Insert cabinet into wall opening in plumb and centered position. Use a carpenter’s level and shim corners of the cabinet if necessary.
-
Once the cabinet is inserted into wall, measure down 4″ from the top and the bottom of the cabinet. Center tihe measurement on the sides of the cabinet. Fig 2.
-
Using a drill bit, drill a total of 4 pilot holes in the locations determined in Step 5. Secure to wall studs through the 4 mounting holes inside cabinet (screws provided)