Danfoss 015G4950 Aero & Aveo Tamper Shells Instruction Manual
- May 15, 2024
- Danfoss
Table of Contents
Danfoss 015G4950 Aero & Aveo Tamper Shells
Product Information
Specifications:
- Model: 015G4950
- Product Name: Protection cap, RAVL
- Model: 015G4951
- Product Name: Protection cap, RAV
- Model: 013G1230
- Product Name: Mounting kit
- Model: 013G3175
- Product Name: Snap holder
Product Usage Instructions
Installation Guide:
- Ensure you have all the components : Protection caps, Mounting kit, Snap holder, and Tamper shells for RAV & RAVL connection.
- Follow the provided instructions to securely install the protection caps on the respective RAV or RAVL units.
- Use the mounting kit to affix the units in the desired location.
- Attach the snap holder as per the guidelines to ensure proper functionality.
Tamper Shells for RAV & RAVL Connection:
The tamper shells are designed to provide additional security for the RAV &
RAVL connection. They come equipped with remote sensors for enhanced
monitoring.
Remote Sensor Activation:
To activate the remote sensor feature, please refer to the detailed
instructions provided in the user manual. Ensure proper setup and calibration
for optimal performance.
FAQ:
-
Q: How do I know if the tamper shells are installed correctly?
A: The tamper shells should fit securely and align properly with the RAV & RAVL units. You can also test the remote sensor functionality to verify correct installation. -
Q: Can I purchase additional tamper shells for backup?
A: Yes, additional tamper shells can be purchased separately to serve as backups or replacements in case of damage or loss.
Installation Guide
Danfoss Aero® & Danfoss Aveo®
tamper shells for RAV & RAVL connection
- 015G4950, Protection cap,
- RAVL 015G4951, Protection cap,
- RAV 013G1230, Mounting kit
- 013G3175, Snap holder
Installation
Tamper Shells with Remote Sensor
Danfoss A/S Climate Solutions
danfoss.com
+45 7488 2222
-
Any information, including, but not limited to information on selection of product, its application or use, product design, weight, dimensions, capacity or any other technical data in product manuals,
catalogues descriptions, advertisements, etc. and whether made available in writing, orally, electronically, on line or via download, shall be considered informative, and is only binding if and to the
extent, explicit reference is made in a quotation or order confirmation. Danfoss cannot accept any responsibility for possible errors in catalogues, brochures, videos and other material. -
Danfoss reserves the right to alter its products without notice. This also applies to products ordered but not delivered provided that such alterations can be made without changes to form, fit or
function of the product. -
All trademarks in this material are property of Danfoss A/Sor Danfoss group companies. Danfoss and the Danfoss logo are trademarks of Danfoss A/5. All rights reserved
© Danfoss Climate Solutions | 2024.01
N443551961571en-000201