LUCKY8 A ARM PDF2 Control Arm Skids Instruction Manual
- May 15, 2024
- LUCKY8
Table of Contents
Control Arm Skids
Installation
A ARM PDF2 Control Arm Skids
Hook the bent taab into the outside hole on the control arm.
Slide the plate into position on the arm and then reattach the swaybar link.
Put the bolt through the offset spacer and washer as shown
Align the bolt to the threaded nut. You can look through the hole in the control arm to make it easier.
Tighten down the bolt, making sure the offset spacer keeps the bolt head flat on the washer. The casting bumps of the control arm will determine the rotation of the spacer. It does not need to be directly over the hole.
Job complete!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>