TOULING TM7 Wireless Lavalier Microphone User Manual

TOULING TM7 Wireless Lavalier Microphone

Specifications

• Dimensions: 90mm x 90mm x 90mm
• Frequency: 2.4G
• Microphone Type: Wireless Lavalier
• Usage: Professional sound recording, online streaming, video vlog, interviews, online teaching & training, online meeting
• System : Dual channel with 2 transmitters and 1 receiver

Product Usage Instructions

Transmitter Operation

• *  **Power On/Off:** Long press the Power Button.

  • Mute/Unmute Mic: Single press the Power Button.
  • Bluetooth On/Off: Double press the Power Button.
  • Noise Reduction On/Off: Long press the dB Button.

Receiver Operation

• *  **Power On/Off:** Long press the Power Button.

  • Repairing with Transmitter: Single poke reset hole for Mic 1 & double poke reset hole for Mic 2.

Charging Instructions

• Transmitter Charging: Connect the USB cable to charge or put it into the charging case.
• Receiver Charging: Connect the USB cable to charge or put it into the charging case.

Ports Information

• Transmitter Ports: USB-C for charging & firmware updation, 3.5mm AUX for ear monitoring.
• Receiver Ports: USB-C for charging & firmware updation, 3.5mm AUX for ear monitoring and camera signal out.

(FAQ)

• Q: How do I pair the transmitter and receiver?
• A: Follow the repair instructions provided in the manual by poking the reset holes accordingly for Mic 1 and Mic 2.
• Q: How do I know when the device is fully charged?
• A : The charge indicator light will turn off when the device is fully charged.

Product Introduction

This product is a 2.4G wireless collar microphone for providing professional sound recording, plug and play, and app-free. It is widely used for online streaming, video vlogs, interviews, online teaching & training, online meeting etc.It is a dual-channel microphone system that consists of 2 transmitters and 1 receiver (as the below picture shows)

 Functions

Functions of Transmitter

1. Windshield Clip Buckle
2. dB Button
3. Power Button
4. Wireless Indicator
5. NR Indicator
6. Reverb Indicator
7. Charge Indicator

Transmitter Operation Instruction

Functions of Receiver

1. State Indicator
2. Charge Indicator
3. Mic 1 Indicator
4. Mic 2 Indicator
5. Ear Monitoring/Audio out to Camera
6. Type-C Audio out
7. Type-C Charing Port (could charging for mobile phone)
8. Magnetic Pole
9. Reset Hole (for pairing)
10. Power on & off
11. 360° Rotatable Clip

Receiver Operation Instruction

Functions of Charging Case

Charging Case Instruction

What’s in the box

1. Case Charger x1
2. Pouch x1
3. Transmitter(TX) x2
4. Receiver(RX) x1
5. Type C-C Cable x1
6. Type C- Lightning Cable x1
7. USB A-C Charging Cable x1
8. Aux Cable(4-4 section) x1
9. Aux Cable(3-4 section) x1
10. External Mic x2
11. Dismountable Furry Windscreen x2
12. User Manual x1

Guide of Use

Connecting Mobile Phone to Record

1. Turn on TX and RX to pair, it will automatically be paired for the first use.
2. Insert mobilephone recording cable to mobilephone
3. Open an App like Camera, TikTok to start recording.

Connecting Mobile Phone to Stream

1. Turn on TX and RX to pair, it will automatically be paired for the first use.
2. Insert mobilephone recording cable to mobilephone
3. Open the streaming App like Tiktok to start streaming

Connecting Camera to Record

1. Turn on TX and RX to pair, it will automatically be paired for the first use.
2. Insert camera recording cable to Camera
3. Open the camera to start recording.

Product Specification

Notice

1. Disconnect power and turn off devices before cleaning them.
2. Non-professionals should not disassemble the Devices by themselves to avoid equipment failure and loss of warranty rights.
3. Do not place the device in direct sunlight to avoid premature aging of electronic parts.
4. Avoid using it in places with flying dust or dirty environments. Dust may easily cause equipment failure.
5. Do not place the device in an environment that is too cold or too hot, as it will cause the device to malfunction.
6. It is recommended that the ambient temperature should not exceed -10°C-45°C during use, and the relative humidity should be 10%-95%
7. Do not put anything into the device to avoid a short circuit of the device or damage to the circuit. Please do not pour any liquid on the device.
8. Avoid collision between the device and hard objects, so as not to cause surface scratches, detachment or other hardware damage.
9. The product shall not be exposed to such overheated environments as sunshine, fire or similar.
10. The manual contains important information, please keep it

Warranty and Service Information

This product is guaranteed for a period of one year from the date of purchase. Only product defects caused by its quality can be returned for repair or replacement. The returned product package shall be in its original package or package with an equal degree of protection. The following information must be presented to obtain Warranty Service:

• the product;
• proof of purchase clearly indicates the date of purchase & product model;
• reason for return.

This Warranty does not cover defects or damages that result from:

• improper storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse;
• contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food;
• use of the product or accessories for commercial purposes or subjecting; the product or accessories to abnormal usage or conditions;
• other acts which are not the fault of the seller;
• damage due to improper operation;
• product’s battery which has not been charged over six months.

Fcc statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF waming for Portable device: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>