Jelanry TWS-DX5 Pro 2.4G Black Wireless Gaming Earbuds Instructions

Jelanry TWS-DX5 Pro 2.4G Black Wireless Gaming Earbuds

Product Design

Item List

• Charging Case

• Earbuds

• Silicone Cap  (S/M/L)

• Charging Cable

• 2.4G Adapter (USB-A/Type-C)

• User Manual

Charging

First time use, please keep earbuds in the charging case and close cover. Then use the original charging cable to charge the headset fully to prolong the lifespan of the headsets.

Pairing

First time use, open charging case, take earbuds out and remove the protective film, put both earbuds back to case and close cover. Then take the earbuds out again, it is ready for pairing.

• Earbuds Input: 5V=40mA
• Charging Case Input: 5V=400mA
  

Charging Earbuds| Put back to the case for auto charging| When charging: Led flashes
Fully Charged: Led’s on for 5s then of
---|---|---
Charging Case| Use the original charging
cable to connect to a charging adapter| When charging: Led flashes Fully Charged: Led’s off
Open/Close
Charging Case| ——
——| Open: RGB Led breathes
Close: RGB Led breathes

Attention

① The battery must be properly handle for recycling, please do not toss the battery into fire, in case causing explosion.
② Please charge the headset which contains lithium-ion battery once 3 months if not use.
③ Please do not use high-power charger to charge the headset to avoid damages to the charging case or earbuds.

Power On/Off

Auto On/off
Earbuds automatically turns on when take out of the charging case.
Earbuds automatically turns off when put back to the charging case

Manual On/Off
In power off status, press and hold 3s for both earbuds to put on.
In power on status, press and hold 3s for both earbuds to turn off.

Connect to Devices

Dual Earbuds Mode

First time use, take earbuds out of the case, voice prompt “Power on”, the 2 earbuds will pair to each other, then voice prompt “GRS connected” “Pairing”, it is ready to connect to a device.

Then open Bluetooth function on the devices, find the name DX5 Pro, click on it to connect it to the device. Voice prompt “Connected” means connected to the device successfully.

• Pairing Statues
  Paired Successfully

• Voice Prompt: Pairing
  Voice Prompt: Connected

Single Earbuds Mode

Take one of the earbuds out off the case, and follow the same steps as Dual Earbuds Mode. Reset will clear all the pairing records from the earbuds, please use cautiously.

Auto Connection

When you take the earbuds out of the case, it will automatically connect to the last paired device. If you need to use the earbuds for another device, make sure you have close the Bluetooth function or deleted the DX5 Pro from the name list of the last paired device.

Once the earbuds are beyond the effective range from the connected device, it automatically turns off. And will automatically connected within 3 minutes once it is back within the range.

GRS Pairing Of Left & Right Earbuds

The left and right earbuds are already connected to each other when off the factory. But if in additional case that paring is disconnect and needs to repair again. Follow below steps:

① After the earbuds are turned on, double click the touch area of both earbuds at the same time, voice prompt “DUDU”, GRS pairing started.
② Then another voice prompt “DuDu”, pairing successfully.
③ Then follow Connect to Device instruction to connect them to the device.

Pairing Of The Headset & 2.4G Adapter 

① Remove the little USB C adapter from the 2.4G adapter, and plug into the USB C port of the mobile device. Then take earbuds out of the charging case, it automatically connects. And will automatically connect to the last connected device next time taking earbuds out. Plug the USB adapter to a computer to use 2.4G paring mode.
② Click the Left earbuds 4 times continuously, if you want to switch the normal Bluetooth pairing mode to the 2.4G pairing mode. When successfully switch to the 2.4G mode, there will be voice prompt “DuDu”, and the Bluetooth icon will appear on the device.

Touch Control Operation Reset The Earbuds

Music Mode (L/R Earbuds)

| | Play/Pause:| Click x 2
---|---|---|---
| Previous Track:| Press & Hold 2s (Left Earbuds)
| Next Track:| Press & Hold 2s (Right Earbuds)

Low Latency Game Mode

| | Triple Click (Right Earbuds) : Voice Prompt “Game Mode” Blue Light Breathes
---|---|---
| Triple Click (Right Earbuds) : Voice Prompt “Music Mode” White Light Breathes.

Note: The Default Setting Is Music Mode.

Incoming Call Mode

| | Answer: Click x 2
---|---|---
| End: Click x 2
| Reject Call: Press & Hold 2s

Voice Assistant

※Require the device itself supports voice assistant and when not on phone.

| | Wake UP Voice Assistant: Triple Click (Left Earbuds)
---|---|---
| Turn Off Voice Assistant: Triple Click (Left Earbuds)

Switch to 2.4G Mode

| Turn On 2.4G Mode : Click the Left earbuds 4 times continuously, Voice Prompt “DuDu”.
---|---
Turn Off 2.4G Mode : Click the Left earbuds 4 times continuously, Voice Prompt “Du”.

Note: Please use the Left earbuds to switch 2.4G and normal Bluetooth mode

Reset The Earbuds

Reset will clear all the pairing records from the earbuds, please use cautiously. Instruction: If the earbuds are in power on status, press and hold 3s for both earbuds to turn them off. Then long press the touch area for 10s to reset the earbuds. Then follow the GRS Pairing Of Left & Right Earbuds instruction mentioned above to reconnect. If both earbuds are not pairing to each other again, one earbud might have no sound after connecting to device.

Troubleshooting

Earbuds have no sound?

A. Please check if the earbuds are with power, if not, recharge it first.
B. Check the earbuds led status, if it is flashing blue light 1s alternatively, it has already been connected to the last paired device. Delete it from the last device then put back to charging case and close cover, then take out again to pair to the device you want.
C. Check if there’s no light when taking earbuds out, try click the touch area 4 times continuously to turn on light? It light can’t be turn on even after fully charged. Try rest the earbuds by following the manual.
D. If above instructions are not helpful, contact seller for further solutions.

Why does the Play/Pause, Volume+/- does not work?

It requires the connected device to support AVRCP (Audio/Video Remote Control Profile)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>