JELANRY ACA-i22 True Wireless Earbuds User Manual

: June 10, 2024
: Jelanry

Table of Contents

Appearance
Parameters
Instructions
Indicator
Use Attention
Frequently Q & A
Contact US
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JELANRY ACA-i22 True Wireless Earbuds User Manual

Appearance

Micrephone
Sensor Instruction

Parameters

Model: ACA-i22
Bluetooth Version: V5.2
Name: ACA-i22
Call Duration: About 3.5H
Music Time: About 5.5H
Standby Time: About 126 Day
Charge Time: About 40 Minutes
Case Can Recharge Earbuds: 3 Times
Transmission Range ：≥10 m
Control Type: Touch Sensor
Charging Port ：USB Type-C
Battery: 40mAh/3.7V; 380mAh/3.7V
Voltage/Current: DC 5V, 80mA; DC 5V, 300mA
Case Dimension: About 60.7x48x25mm
Net Weight: About 40g
Water Resistant Level: IPX4
Compatibility: Bluetooth Enabled Devices
Supported Profile: a2dp\avctp\avdtp\avrcp\hfp

Instructions

Turn On:

Open case for auto turn on.
If case not nearby, press & hold MFB button for 3s, white LED flash 1s, you will hear voice prompt “power on”.

Turn Off: Put earbuds back to case, close cover. (Earbud will automatically turn off after 5 minutes if not connecting nor putting back to case, press MFB button 3s to turn it on.)

Auto Paring:

Open charging case cover.
Find and click ACA-i22 on the Bluetooth list of your device for one-step paring, then you will hear “connected”.
Next time, simply open charging case cover for auto connection to the last paired device.

Play/Pause: Double click MFB button (left or right) when listening to music.
Previous Track: Press and hold Left earbud 1.5s(No previous track if only use 1 earbud).
Next Track: Press and hold Right Earbud 1.5s.
Answer Call: Double click (left or right) MFB button.
Reject Call: Press and hold MFB button(left or right)for about 3s.
Hang Up: Double click (left or right)MFB button.
Game Mode: Continuously click (left or right) earbud 4 times.
Voice Assistant: Triple click FBM button 3 times (left or right earbud)
Reset: First click Forget This Device on mobile, then press and hold FBM button for both earbuds 5s till white light turns to red. Red light out and white light flashes, reset successful and ready for pairing again. Note:Left and right earbuds are locked as a pair, won’t pair with earbud from another headset.

Indicator

Charge Earbud：
White light on for 4s after you put earbuds into case for charging. Lights out when the earbuds are fully charged.Red light flashes every 4s if case at low power，then please charge the case ASAP.

Charge Case：
Case flashes Red light while charging. Red light stays on when fully charged. After you pull off the charging cable, White light on for 4s then out.

Paring Mode:
Right earbud flashes white light quickly every 0.3s, left earbud flashes white light every 5s, lights out when earbuds are successfully connected to device

Low Power:
Red light flashes every 8s, and there will be voice prompt “battery low” every 5 minutes.

Warm Tip:
Please fully charge the headset for first time use to prolong the lifespan.

Use Attention

Please read all instructions and warnings before using this product. Improper use will damage the product or personal safety

The product contains batteries, please do not expose it to sunlight, fire or similar overheating environments; do not store this product in high temperature, strong light and strong magnetic field environments, do not place it in other harsh environments such as fire sources, if it enters water, please let it dry naturally before use.
If the consumer violates the product manual and uses it improperly, the personal and property damage caused by it will bear all the consequences, and the company will not bear any legal responsibility.
Non-professionals are strictly prohibited from disassembling this product.
Avoid using electrical appliances or loads that exceed the output current of this product (the circuit will be protected, no output).
Avoid strong physical effects, including knocking, throwing, trampling, squeezing, etc.

Frequently Q & A

Why can’t the headset be turned on?
A: When using for the first time, make sure that the headset is fully charged. If there is no power, the product will not be able to be turned on.
There is no sound when playing a song after connecting?
A: Check whether the playback device and the headset have established a valid connection. If the audio device fails to connect normally, please reconnect. Adjust phone volume at the same time to an appropriate volume level.
The mobile phone cannot search for the Bluetooth headset, the Bluetooth connection is unstable or the mobile phone is disconnected during use, and the sound is stuck/interrupted?

Answer:

Please do not exceed the Bluetooth connection distance of the mobile phone by 10 meters to avoid interference by the wall or the human body;
Please make sure the headset has enough power:
Please reset the headset to factory settings, and then turn on the Bluetooth of the mobile phone to search for pairing connection;
Please ensure that there is no strong interference signal such as wifi/cell tower/radio frequency in the surrounding environment
If the above operation still cannot connect, please contact customer service.