JELANRY BT-A2 TWS Headset Instructions

TWS HEADSET
BT-A2/BT-A3
INSTRUCTIONS

BT-A2 TWS Headset

Pay Attention:
The earphones have built-in high-quality lithium batteries. In order to get a better battery life, be sure to charge the earphones for 60 minutes when using it for the first time.
(If you encounter unsolvable product problems, be sure to contact the dealer’s customer service staff to obtain an effective solution)
Packing List:

• Bluetooth Headset (2pcs)
• Headset Charging Case
• USB to USB C Charging Cable
• User’s Guide
• Zipper Storage Case

Specifications:

• Name: BT-A2/BT-A3
• Bluetooth Version: 5.0
• Power Input: DC 5V
• Battery Capacity: 3.7V / 50mA
• Working Time: 3-4 hours
• Support Agreement: HSP / HP / A2DP / ARCP
• Impedance: 32Ω

Product Instructions:

1. Power On / Off:
1.1 Automatic Startup:
If the headset is not used for a long time, the headset enters the sleep state. When you need to use it, put the headset into the charging compartment, then take it out, and it will automatically turn on.
1.2 Manual Startup:
Press and hold the headset touch area for 4 seconds, the blue light flashes and the boot is complete
1.3 Automatic Shutdown:
When not in use, put the headset in the charging case to turn off automatically.
( Note: When the power of the charging cabin is insufficient, the headset will not automatically switch on and off)
1.4 Manual Shutdown:
Press and hold the headset touch area for 5 seconds, the red light flashes continuously to complete the shutdown.

Pairing Mode

2.1 The first time you use the headset, the left and right headsets need to be paired.
This process takes about 10 to 30 seconds to complete according to the environment.
Methods as below:
Open the charging compartment cover, the headset is taken out to enter the automatic pairing mode, and the left and right ears alternately flash red and blue. After successful connection, any one of the headset indicators will turn off, indicating that the connection is successful, and at the same time the headset will have a voice prompt to indicate the connection status.

Paring with Mobile Phone

3.1 Android / IOS:
3.1.1 Turn on the Bluetooth of the mobile phone, find the device name of the BT-A2/ BT-A3 in the search list, click connect, and it can be used after the connection is successful (if the pairing with interference fails, repeat above operation).
3.1.2 If the connection is successful, but there is no sound from the headset, please ignore this Bluetooth device in the phone search list, and then reconnect.
3.1.3 When the mobile phone and the Bluetooth headset have been paired successfully, when the mobile phone Bluetooth is turned on, the headset will automatically connect to the mobile phone when it is turned on.

Switch Single or Double Ear Mode

4.1 Binaural Mode:
The headset defaults to binaural mode, and you can use both ears after successful connection.
4.2 One Ear Mode:
After the connection is successful, when playing music or answering the phone, put any earphones back into the charging compartment. The earphones that are still wearing will continue to work and will not be affected. Put the earphones back into the charging compartment and take out, automatically restore the binaural mode.
( Note: If the earphone automatically becomes the mono-ear mode, only one earphone sounds, you can put both earbuds into the charging compartment at the same time to reset the earphones.)

Charging Instructions

5.1 Charging Headset:
Put the earphone back into the charging compartment, the earphone will charge automatically. The red light of the earphone is always on when charging, the blue light will be on when it is full, and it will go out after 2 minutes. Full charge is about: 1 hour.
After a full charge, it automatically enters sleep (please ensure that the charging compartment has sufficient power).
5.2 Case Charging:
When the charging compartment is less than 20% of power, the charging case power indicator flashes. Please charge in time to ensure the normal use of the headset. (For your safety, be sure to use a USB charger that complies with safety regulations.) It is recommended that you use the original USB charger of the mobile phone. The full time is about 40 minutes. You can charge the headset about 4 times when the charging compartment is fully charged.

Touch Control Description:

Touch the O area of the earbuds with your finger to realize the operation function. If you do not understand the touch function, disoperation will occur, please read the definition of touch function in detail. The specific function description refers to the following table:

is not connected with any device)
Answer/End a Call| Touch left / right ear once
Reject call| Long press on any left / right ear for 2 seconds

Note: In order to ensure the safe use of the headset, please read in detail.

1. The headset should be stored in a dry and ventilated environment, avoid contact with oil, water vapor, steam, moisture and dust, so as not to affect the performance and life of the product. It is strictly forbidden to place the headset in a high temperature environment exceeding 50 C, otherwise the battery may crack.
2. Avoid using harsh organic solvents or objects containing these ingredients to clean the headphones. The charging contacts of the headset need to be regularly moistened with a small amount of alcohol / rust-proof oil on a cotton swab and wiped clean to keep the headset charging function normal.
3. The headset should be used in accordance with the specifications of the manual. Pay attention to the impact of the use environment on the headset. To ensure a smooth connection, it is recommended that the distance between the mobile phone and the headset be within 10 meters of the obstacle-free range.
4. If there are other problems such as the headset is not connected or the communication is not smooth, please do not disassemble the headset body and its accessories without permission, otherwise the warranty will not be granted.
5. To charge the headset, please choose a household or car charger that complies with safety regulations.
6. To ensure that you use the headset normally, please ensure that the charging case and headset have sufficient power.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>