Quarte WF301577 Retro 5 Piece Round Dining Table Set Instruction Manual
- May 15, 2024
- Quarte
Table of Contents
Quarte WF301577 Retro 5 Piece Round Dining Table Set
Parts
Specifications
Assembly Steps
Step 1
Attach the seat frame (B) to the backrest (A) using four bolts (1), four lock washers (4), and four flat washers (5). Use the Allen key (6) to tighten the bolts.
Step 2
Secure the seat frame (B) to the backrest (A) by adding four more bolts (2), lock washers (4), and flat washers (5) to the underside. Tighten with the Allen key (6).
Step 3
Attach the front legs (C) to the seat frame (B) by using two bolts (3), lock washers (4), and flat washers (5) for each leg. Secure tightly with the Allen key (6).
FAQ
- What tools are needed for assembly?
- An Allen key, which is included in the hardware list, is required for assembly.
- How many people are recommended for assembly?
- The instructions do not specify, but it is generally easier to assemble furniture with two people.
- Are additional washers or bolts required aside from those listed?
- No, all necessary bolts and washers are listed in the hardware list and should be included with the parts.
- What should I do if I’m missing a part or hardware?
- Contact the manufacturer or the store where you purchased the item for replacement parts.
- Can I use a power tool to assemble the chair?
- While not specified, it’s generally recommended to follow the provided instructions and use the tools listed, such as the included Allen key, to avoid damaging the parts.
IMPORTANT NOTE
- PLACE ALL PARTS ON A CLEAN AND SMOOTH SURFACE SUCH AS A RUG OR CAPET TO AVOID THE PARTS FROM BEING SCRATCHED.
- BEFORE YOU BEGIN, KINDLY FOLLOW THE ASSEMBLY INSTRUCTIONS STEP BY STEP
- DO NOT TIGHTEN ALL SCREWS AND BOLTS UNTILL THE CHAIR IS FULLY SET-UP.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>