YUNJI WP33 Pro Mobile User Manual
- June 16, 2024
- Yunji
Table of Contents
YUNJI WP33 Pro Mobile
Product Information
- Product Name: WP33 Pro
- Model Number: 22000
- Manufacturer: Silicon Valley Power Intelligent Terminal Industrial Park
- Address: 202, Building A2, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan Street, Longhua District, Shenzhen China
- FCC ID: 2ANMU-WP33PRO
Specifications
- Vent holes for heat dissipation
- Receiver for phone calls
- Touch screen for interaction
- Light sensor for automatic brightness adjustment
- Front camera for taking selfies
- Type-c port for charging and data transfer
- MIC for audio input
- SIM card slot for mobile network connectivity
- Flash for camera illumination
- Custom Key for personalized functions
- Rear main camera for capturing photos and videos
- Night vision camera for low-light photography
- Speaker soundhole for audio output
- Night vision light for enhanced visibility in the dark
- Volume buttons for adjusting audio levels
- Macro camera for close-up shots
- Power button with integrated fingerprint sensor
Product Usage Instructions
Inserting the SIM Card
- Locate the SIM card slot on the device.
- Use a SIM card ejector tool or a paperclip to gently push the SIM card tray release button.
- Remove the SIM card tray from the device.
- Place the SIM card into the tray, ensuring it is properly aligned with the designated slot.
- Insert the SIM card tray back into the device.
- Push the tray gently until it clicks into place.
Charging the Device
- Connect the Type-c cable to the Type-c port on the device.
- Plug the other end of the cable into a power source, such as a wall adapter or a computer.
- The device will start charging automatically. The battery icon will indicate the charging progress.
- Once fully charged, disconnect the cable from the device and the power source.
Taking Photos and Videos
- Open the camera app on the device.
- Use the rear main camera for general photography and video recording.
- For low-light conditions, switch to the night vision camera for better visibility.
- To capture close-up shots, use the macro camera.
- Tap on the screen to focus on a specific subject.
- Press the shutter button to take a photo or start recording a video.
Frequently Asked Questions
-
Q: What are the FCC IDs for WP33 Pro?
A: The FCC ID for WP33 Pro is 2ANMU-WP33PRO. -
Q: Does WP33 Pro support fast charging?
A: Yes, WP33 Pro supports fast charging through the Type-C port. -
Q: Can I expand the storage of WP33 Pro?
A: Yes, WP33 Pro has a SIM card slot that can also be used for expanding the storage using a compatible memory card.
Comes with the Google’™ app and Google Chrome'” Android is a trademark of Google LLC.
OVERVIEW
Accessories
Battery
WP33 Pro includes an internal battery You can track your battery status with
the icon shown on the top right of the screen.
Warning
- Use only OUKITEL-approved batteries specifically designed for you phone.
- Incompatible batteries can cause serious injuries or damage to your phone.
- Never place batteries or phones on or in heating devices such as microwave ovens, stoves, or radiators. Batteries may explode when overheated.
How to insert the card
- To make sure your smartphone be able to call, put the SIM card in the following order.
- Press the card pin into the side hole and then the card tray pops up and pull out it.
- With the phone facing up,insert the card holder into the phone in the direction of the arrow
How to boot
- Non-removable battery
- Press the power button for 3-5 seconds to boot
How to send SMS, MMS
SMS
- Open the SMS app
- Select New Information
- Enter a phone number or browse your contacts
- Select Edit Information and enter your text
- Send
MMS-video
- When writing a text message
- Select images, videos, or other files you want to add, even you can take a new picture or video right away
- Selecting or sending
Language switching settings
- Main menu–settings system–language and input method Language and input method–language–language adding
- Select the language you need, the system will automatically
- jump back to the language interface
- Select the icon after the language bar and drag it to the first one
SAR
- The maximum electromagnetic radiation absorption ratio (SAR) of this product is $2.0W/kg
- In line with the requirements of the national standard GB 21288-2007 EN62209-1:2016; EN 62209-2:2010; EN 62479:2010; EN 50360:2017; EN 50566:2017;
Safety – To ensure safety during use of the product, you must strictly abide by the following rules
- The pad should be at least 15cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket.
- Do not expose the device and other batteries together with high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens, or water heaters. Overheating of the battery can cause an explosion.
- When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the outlet.
- If the device is equipped with a non-removable battery, do not replace the battery by yourself to avoid damaging the battery or the device.
- Use of an unapproved or incompatible power source, charger, or battery may cause fire, explosion, or other hazards.
- Do not disassemble or reset the battery, insert other objects, or immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion.
- Do not drop, crush, scratch, or puncture the battery to avoid subjecting the battery to excessive external pressure, Which may result in internal short-circuit and overheating of the battery
- The company does not bear responsibility for accidents caused by non-standard related charging equipment.
If you want to read the full CE compliance, please check this link: http://www.
Maintenance
- Thoroughly understand the maintenance of this pad to use the pad more safely and effectively, and extend the service life of the pad as much as possible.
- Please follow the instructions in the manual to open the pad, disassemble the accessories, and do not try other
- Please avoid dropping, knocking, or shaking your pad. Rough handling of the pad can cause the screen to rupture, damaging the internal circuit board and the delicate structure.
- Do not use chemical solvents or detergents to clean your pad. Wipe the pad case with a soft cotton cloth dampened with water and mild soap.
- Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display.
- When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life.
- This machine’s standard package (Package box-Pad-Manu- al-Protective film-Protective case-Headset-USB data cable-OTG cable-Charger)
This device complies with part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference Any changes
or modifications not expressly approved by the party responsible for
compliance could void the uer’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used by the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Specific Absorption Rate (SAR) information:
This Mobile Phone meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluation
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health.
requirements use accessories that maintain a 10mm separation distance between
the user’s body and the back of the handset. The use of belt clips, holsters,
and similar accessories should not contain metallic components in its
assembly. The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with exposure requirements and should
be avoided. Use only the supplied or approved antenna.
FCC ID : 2ANMU-WP33PRO
- Manufacturer’s Name: SHENZHEN YUNJI INTELLIGENT TECHNOLOGY CO., LTD
- Smart Phone
- Model number:
- Operating Temperature: -10° C to 40° C
This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of Omm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or approved antenna. This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.
- Use carefully with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO TQ THE INSTRUCTIONS
- The product shall only be connected to a USB interface of version USB 2.0
- The adapter shall be installed near the equipment and shall be easily accessible.
- The plug considered as disconnect device of the adapter
- The device complies with RF specifications when the device is used at 0mm from your body
www.oukitel.com
Manufacturer Name: ShenZhen YunJi Intelligent Technology CO., LTD Manufacturer
Address: 202, Building A2, Silicon Valley Power Intelligent Terminal
Industrial Park, No. 20, Dafu Industrial Zone, Kukeng Community, Guanlan
Street, Longhua District, Shenzhen China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>