AMBIEN TECH STCV-SA-A-96-XXX Strip Light Dimming Controller Installation Guide

AMBIEN TECH STCV-SA-A-96-XXX Strip Light Dimming Controller

Quick Specs

• Input / Output Voltage 12 / 24VDC
• Max Power 12V (5A) / 24V (4A)
• Ambient Temp -30 °C – + 40 °C / -86°F – + 104°F
• Environment Dry and Damp Location

Before You Begin

To avoid fire, shock, or death, turn the power off at circuit breaker and test to ensure the power is off before wiring.

Select Dimming Mode
Long press on the “S” Button.

SleekTone Interface

Connect to the SmartAir App

• Scan the QR code to download the app. Follow the instructions to connect to the SmartAir App.
• Press the “S” button to reset device manually.

Wiring Diagram

*If you are installing a smart wall switch – See page 2.

Pairing With A Smart Dimmer

Wiring Option 1: Electrical Connection

If you are installing more than one Wall Switch unit, all others must be switched Off while pairing.

1. Make sure both sliders are set to the top and the Wall Switch is switched Off.
2. Switch the power ON at the circuit breaker, the green LED Indicator will light up.
3. Turn ON the Wall Switch, the green LED Indicator will blink while pairing.
4. After up to 15 seconds, your LED fixture will be paired with the Wall Switch.
5. To verify pairing is successful, move the sliders and ensure that the LEDs respond accordingly.
6. Scan the QR code to download the app. Follow the instructions to connect to the SmartAir App. If Pairing is not successful press the pairing button.

Wiring Option 2: Stand-alone Dimmer

If you are installing more than one Wall Switch unit, all others must be switched Off while pairing.

1. Make sure both sliders are set to the top and the Wall Switch is switched Off.
2. Switch the power ON at the circuit breaker, the green LED Indicator will light up.
3. Press the Pair Device Button “D” on the SleekTone CV
4. Turn ON the Wall Switch and press the reset button.
5. The green LED Indicator will blink while pairing.
6. After up to 15 seconds, your LED fixture will be paired with the Wall Switch.
7. To verify pairing is successful, move the sliders and ensure that the LEDs respond accordingly.
8. Scan the QR code to download the app. Follow the instructions to connect to the SmartAir App.If Pairing is not successful please repeat the pairing process.

References

• AmbienTech | Tunable White Wall Switch | DimTone

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>