XPOtools 63505 LED Tower Light Instruction Manual
- May 15, 2024
- XPOtools
Table of Contents
XPOtools 63505 LED Tower Light
Product Information
- Specifications
- Item number: 63503
- Housing material: Plastic
- Power (W): 100
- Electricity supply: 230 V / 50 Hz
- Colour temperature (K): 10,000
- Lumen (lm): 150
- Protection class: IP44
- Mains cable and plug: Included
- Length of mains cable (m): Not specified
- Socket max. connection: Not specified
- Dimension: Not specified
Product Usage Instructions
- Safety Instructions
- Before using the LED work light, please ensure to read and understand the safety instructions provided in the manual. If in doubt, consult an authorised electrician.
- Operating Instructions
- Carefully wipe the work light with a dry cloth for optimal light output and heat dissipation.
- Maintenance
- It is recommended to wipe the work light with a dry cloth regularly to maintain good light output and heat dissipation.
FAQs
- How do I dispose of the LED work light?
- To dispose of the LED work light, follow the EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU).
- Do not dispose of the light with domestic waste. Contact your local community or municipal waste disposal facilities for proper disposal methods.
- Can I replace the main cable and plug if needed?
- The LED work light comes with a mains cable and plug included.
- If replacement is needed, ensure to use a cable suitable for the power requirements of the light and follow safety guidelines when replacing it.
Introduction
- Thank you for purchasing this quality product.
- To minimise the risk of injury we urge that our clients take some basic safety precautions when using this device.
- Please read the operation instructions carefully and make sure you have understood its content.
- Keep these operation instructions safe.
Safety instructions
- Only connect the work light to a grounded 230 V socket.
- Protection class IP54 for indoor and outdoor use.
- Carry the work light by the handle or on your body. Do not carry or move the work light by the cable.
- The work light must be placed on a non-flammable surface.
- Do not place the work light where it can be accidentally knocked over.
- Do not use the work light if it is damaged in any way. Maintenance must only be carried out by an authorised electrician.
Operating instructions
- Unfold the tripod legs of the work light to use the work light in a freestanding position.
- Make sure that the tripod legs are locked in one of the two positions.
- Before use, make sure that the work light and cable are not damaged.
- Connect the work light to a suitable power source.
- The socket of the work light can be used for connecting power tools or similar equipment or for connecting an additional work light (max. 2400 W/16 amps).
- Make sure that the cable does not pose a hazard at the workplace.
- Disconnect the work light from the mains after use.
- Do not attempt to open the work light.
Notes on maintenance
- Carefully wipe the work light with a dry cloth to ensure good light output and heat dissipation.
Parts overview
| № | Name | № | Name |
|---|---|---|---|
| 1 | Handle | 3 | Cable holder |
| 2 | On/off switch | 4 | Socket |
Technical data
| Item number | 63503 | 63504 | 63505 |
|---|---|---|---|
| Housing material | Plastic | ||
| Power (W) | 100 | 150 | 200 |
| Electricity supply | 230 V / 50 Hz | ||
| Colour temperature (K) | 2700–6400 | ||
| Lumen (lm) | 10,000 | 15,000 | 20,000 |
| Protection class | IP54 | ||
| Mains cable and plug | H07RN-F 3×1,5 mm² | ||
| Length of mains cable (m) | 2 | ||
| Socket max. connection | 2400 W / 10 A | ||
| Dimension (㎜) | 1100 × 1330 | 1100 × 1330 | 1300 × 1640 |
Disposal Regulations
- EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were imple-mented in the law related to electrical and electronic equipment and appliances.
- All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo.
- This logo indicates that this electric equipment must not be disposed of with domestic waste.
- The company WilTec Technik GmbH has been registered in the German registry EAR under the WEEE-registration number DE45283704.
- Disposal of used electrical and electronic appliances (intended for use in the countries of the European Union and other European countries with a separate collection system for these appliances).
- The logo on the article or its packaging points out that this article must not be treated as normal household waste but must be disposed to a recycling collec-tion point for electronic and electrical waste equipment.
- By contributing to the correct disposal of this article you protect the environment and the health of your fellow men.
- Environment and health are threatened by inappropriate disposal.
- Material recycling helps reduce the consumption of raw materials.
- Additional information on recycling this article can be provided by your local community, municipal waste disposal facilities, or the store where you purchased the article.
Important notice:
- The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH.
Address: WilTec Wildanger Technik GmbH Königsbenden 12 / 28 D-52249 Eschweiler
The information contained in this document may alter at any time without previous notice. It is prohibited to copy or spread any parts of this document in any way without prior written allowance. All rights reserved. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual or the diagrams and figures shown. Even though the WilTec Wildanger Technik GmbH has undergone the biggest possible efforts to ensure that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided. If you should find a mistake or wish to suggest improvement, we look forward to hearing from you.
CONTACT
- Send an e-mail to:
- service@wiltec.info.
- or use our contact form:
- https://www.wiltec.de/contacts/.
- The most recent version of this manual in various languages can be found in our online shop via:
- https://www.wiltec.de/docsearch.
- Our postal address is:
- WilTec Wildanger Technik GmbH
- Königsbenden 12
- 52249 Eschweiler
- Germany
- To return orders for exchange, repair, or other purposes, please use the following address. Attention! To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods.
- Returns Department
- WilTec Wildanger Technik GmbH
- Königsbenden 28
- 52249 Eschweiler
- E-mail: service@wiltec.info.
- Tel: +49 2403 55592–0
- Fax: +49 2403 55592–15
- https://www.XPOtool.com.
- Item 63503–63505
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>