narbutas Q-ACTIVE Sit Stand Desks Instruction Manual

Table of Contents

narbutas-Q-ACTIVE-Sit-Stand-Desks-product

Specifications

Setting up the Q-ACTIVE Sit-Stand Desk

Adjusting Desk Height

FAQ (Frequently Asked Questions):

Q: How do I clean the Q-ACTIVE Sit-Stand Desk?

A: Use a damp cloth with mild detergent to clean the desk surface. Avoid using abrasive cleaners that may damage the finish.

Q: Can I disassemble the desk for relocation?

A: Yes, you can disassemble the desk following the reverse steps of the assembly process. Ensure all components are safely stored for reassembly.

EN 527-1:2011
- EN 527-2:2016+A1:2019
10-year Warranty
- See Warranty Statement
Other documents available for this product
- User manual for Q-ACTIVE sit-stand desks

narbutas-Q-ACTIVE-Sit-Stand-Desks-fig-1

Desktop

Adjustable telescopic frame

Strut rectangular steel tubes: 33,46” x 1,57” x 0,79”; 40,16” x 1,38” x 0,59”;
Side support steel L shape: 19,69” x 2,56” x 1,38”;
Adjustment range – 23,62”;
Powder-coated metal, matching the colour of the columns and feet.

Lifting columns

Three (3) level columns;
Rectangular tube dimensions: 3,15” x 2,36”, 2,76” x 1,97”, 2,36” x 1,57”;
Two motors;
Lifting speed: up to 1.57”/sec.;
Noise level <48 dB / Silent: 38 dB;
Stroke length: 25.59”;
Maximum desk lifting capacity (desktop included): 198,4 lbs;
Powder-coated metal, matching the colour of the frame and feet;
Glide system solution protects the desk columns from possible paint scratches;
Soft start and soft stop;
Anti-collision feature integrated into the columns.

Feet

Types of height adjustment button

UA button (1)
- Up and down drive, with 2 memory positions.
VA button (2)
- Up and down drive 2 memory positions and a screen that shows the current height.

Electronic data power unit

narbutas-Q-ACTIVE-Sit-Stand-Desks-fig-3

Dimensions of the cut-out for the metal desk grommet ZNZ010

The desk is compatible with the following universal accessories:

The Q-ACTIVE collection is compatible with most screen collections in the NARBUTAS portfolio.
Our recommended screens in combination with the Q-ACTIVE sit-stand desk are:
The desk with full height adjustment components and a tabletop can be assembled in only 9 minutes.
The metal components arrive in a smart package that optimizes space and includes all necessary parts (telescopic frame, height adjustable columns, and metal feet).
This helps the user to assemble the full desk much more quickly.
Most of the electrical components arrive semi-assembled with ready-made cable connections. See the assembly instructions for more details.
The desk is equipped with integrated anti-collision technology that minimizes the risk of damage caused by squeezing or blocking obstacles in an up-and-down direction.
Important: Does not work if a collision happens during the initialization phase.
The desk will not stop if a collision happens within the 1st second of use, or after the button on the control unit has been released.
The desk will not stop if a collision happens over too long a time and with a very soft object.
The desk control system protects itself from electrical overload. Every minute of operation must be followed by 9 minutes of inactivity.
The duty cycle factor of the desk is 1:9. If this limit is exceeded, the desk will become inoperable until the control box resets automatically.
Please wait for at least 9 minutes and try again before proceeding.
narbutas.com