XPOtools 63296 Motorcycle Stand User Manual
- June 12, 2024
- XPOtools
Table of Contents
XPOtools 63296 Motorcycle Stand User Manual
Read and follow the operating
instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical
data can differ insignificantly.
Updating the documentation.
If you have suggestions for improvement or have found any irregularities,
please contact us.
The information contained in this document may alter at any time without
previous notice. It is prohibited to copy or spread any parts of this document
in any way without prior written allowance. All rights reserved.
The Wilted Wil danger Technik GmbH cannot be held accountable for any possible
mistakes in this operating manual, nor in the diagrams and figures shown.
Even though, the Wilted Wild anger Technik GmbH has undergone biggest possible
efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes
cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we
look forward to hearing from you.
Send an e-mail to: service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in
our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the
following address. Attention!
To allow for a smooth execution of your complaint or return, it is important
to contact our customer service team before returning the goods.
Returns Department
Wilted Wild anger Technik GmbH Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury
we urge that our clients
take some basic safety precautions when using this device. Please read the
operation instructions carefully and make sure you have understood its
content.
Keep these operation
Safety instructions
- Only assemble the stand in accordance with these instructions. Improper assembly may result in hazards.
- Wear safety goggles, respiratory protection, and heavy-duty work gloves during assembly.
- Keep the assembly area clean and well lit.
- Keep uninvolved persons away from the area during assembly.
- Do not assemble when tired or under the influence of alcohol, drugs, or medicine.
- Weight capacity and other product characteristics apply only to properly and fully assembled products.
- Read, understand, and follow all instructions before operating the equipment.
- Use only on hard, level surfaces.
- Secure the wheel chock and strap the motorcycle down before transporting it.
- Keep your distance from the stand/wedge and wheel when loading and unloading.
- Load and unload wheel slowly.
- Use only for motorcycle tires.
- Adjust to tire size before use.
- Also use the side stand if available.
- Do not ride the motorcycle on the stand.
- Do not sit on the motorcycle when it is loaded on the stand.
- Inspect the stand before each use. Do not use it if any parts are loose or damaged.
- The warnings, precautions and instructions described in this manual cannot cover all possible conditions and situations that may occur. Always use the product with foresight and caution.
Exploded view and parts list
| № | Name |
|---|---|
| 1 | Base plate |
| 2 | Wheel adapter |
| 3 | Wheel mount |
| 4 | Wheel mount support |
| 5 | Base rail |
| 6 | Pin |
| 7 | Bolt |
| 8 | Nuts |
| 9 | Cotter pin |
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of Wilted Wild anger Technik GmbH.
https://www.XPOtool.com Item no : 63296
