rimoo RM-AF601 Air Fryer User Manual

rimoo RM-AF601 Air Fryer

IMPORTANT SAFEGARDS

Follow basic safety precautions when using your air fryer. Read all instructions.

• Do not touch the hot surface and open the aluminum cover when running.
• Do not block any vents, hot steam is released through the vents, so keep your hands and face away from the openings.
• Your air fryer should only be used with 120V,60Hz electrical systems. Do not plug into another type of outlet.

SAFETY

SAFETY WARNINGS
Tip: Misuse without observing safety warnings may lead to accidents. To avoid injury and property damage to you and others, please be sure to always observe the following safety precautions.

Caution: This product does not take into account the following situations.

• Unmanned children and disabled persons using the apparatus.
• Young children playing with the apparatus.
• Locations marked with this symbol & .Do not touch the surface temperature during the work of the apparatus is very high.
• Forbid to put the product near flammable objects, and pay attention when using: curtains, drapes, curtain walls or similar objects to prevent fire.
• Do not put your hands or face close to the vent during working to avoid burns.
• Do not cover the vent with a cloth or the like during work to avoid accidents or damage to the product.
• Do not modify: Do not disassemble or repair except for maintenance technicians to avoid fire, electric shock, or injury.
• Do not use for voltages other than AC 120V to avoid fire and electric shock. Do not use the power cord plug or cord body damage.
• Do not operate in the following way to avoid fire and electric shock caused by broken power cord. Power cord forcibly bent, near high temperature, bundled, carrying heavy objects, etc.
• Do not move or shake the product during the working process.
• Do not allow children to operate and use alone, to be placed in a place where babies and children can not touch, to avoid electric shock, burns, and other dangerous accidents.
• Do not insert pins, wires or other objects into the product exhaust hole to avoid electric shock injury.
• During use, the air outlet should not be facing the power cord.
• The head of the appliance must not be immersed in water or dripping water.
• The product is limited to indoor applications.
• Use an outlet with a rated current of 10A or more with grounding wire alone, if used with other appliances, avoid fire and other dangers caused by abnormalities in the outlet.
• Plug of the power cord, plug end, and product socket with dust or water stains should be cleaned in time to avoid fire, electric shock or short circuit.
• For product repair or replacement parts, please go to the designated professional maintenance outlets. To avoid improper maintenance or improper selection of accessories to bring the use of hidden dangers.
• The plug needs to be thoroughly inserted into the socket to avoid fire, electric shock, and short circuits.
• Do not unplug the plug with wet hands to avoid electric shock and injury.
• If the power cord is damaged, to avoid danger, it must be replaced by the manufacturer, its maintenance department, or similar departments of professionals.
• The appliance must not be operated using an external timer or independent remote control system.
• The following items should not be baked in the product, such as: paper, plastic or flammable items, etc.
• Adequate space should be left around the product, keeping a distance of more than 30 cm between it and other items, and the surface should not be covered with any items.
• The product should not be opened when it is not loaded into the cage.
• When the product is in use, only touch the prescribed operation interface to prevent burns.
• The temperature of certain surfaces is high during the work of the appliance, and the surface of the heating chamber will become hot during use.
• Be sure to unplug the power cord when the product is not in use or out of the house to avoid malfunction or danger.
• The product must be used on a smooth, heat-resistant countertop to avoid product damage or accidents.
• Some important parts, such as fuses and other improper maintenance or private shorting may fail to protect the product, resulting in overheating or fire.
• If the product picture is not the same as the actual product, the actual product shall prevail.
• The normal working altitude range of the product is 0-2000 meters.
• The first use of 200 °C dry burning 10 minutes, the dry burning process may cause a small amount of white smoke or odor, is a normal phenomenon, please do not panic.
• Before the product works, please check whether the oil-catching plate rotating cage is placed in place to avoid causing malfunction.
• If you find that the product is malfunctioning, please be sure to stop using it and contact our service department immediately.
• Please keep the manual for future inquiries during use.

AIR FRYER DIAGRAM

Your RIMOO Air Fryer with 360° hot air circulation technology achieves fast cooking and cooks crispy, delicious, healthy food with up to 85% less oil than deep fryers. With user-friendly one-button controls and visible, safe design, the RIMOO Air Fryer is the star of your kitchen.

• A. Rotating Cage (three layers)
• B. Oil Catch Pan
• C. Control Panel
• D. Spindle
• E. Aluminum Cover
• F. Handle

DISPLAY DIAGRAM

Cooking Functions

1. French Fries
2. Full Chicken
3. Chicken Wings
4. Steak
5. Shrimp
6. Pizza
7. Bread
8. Veggies

Control Panel

Cooking Function Settings

Operation Instruction

1. Plug in power, there is a beep sound, all LEDs will light up for ls, then only the “On/Off” button keeps light and blink, all other lights are off
2. Press the “On/Off” button, all buttons light up, the LED display shows “—-” and blinks, the product enters the standby stage and the user can press the button to select the program. Press the “On/Off” button again, there will be a beep sound, all lights turn off except the”On/Off” button light up and blink.
3. If there is no operation by the user within 10 minutes after power on, all lights will be off and only the “On/Off” button is on.
4. Press the icon to select the program, there are preset menu and the function of customizing temperature and time.
5. After the program is selected, press the “Start/Pause” button, the product will start working and the LED will show the exchange between the program, temperature, and time. In manual programs, the LED exchanges between temperature and time. Press the “Start/Stop” button again, and the product stops working and enters the standby stage, all the lights are on and the LED display”—-” blinks.
6. When the cooking finishes, there will be 3 beep sounds, the product will enter the standby stage.

Icons Function And Program Selection

1. “ Menu”: Press the menu button to cycle through the 8 preset programs, the LED will change from “P0l” to “P08” to “P0l”. The default is the “P0l” program.
   (Remark:)

   • a. After pressing the menu button, by pressing the”+” “-” button, can also cycle among the different programs.
   • b. for preset menu program, the temperature and time can not be adjusted) DIY function, you can choose your desired working time and temperature. After both “Temperature” and “Timer” are selected, press the “Start/Pause” function to start cooking.

2. “ Temperature”: Press the “temperature” button, and the LED shows “C180″, press the”+” ” -” button to change the temperature from C80 to C200 with 5°C change each press, can make fast change by long press 3s.

3. “ Timer”: Press the “timer” button, and the LED shows “15” which means the cooking time 15 minutes, press the”+” “-“button to change the working time from 01 to 60 with lmin change each press, can make fast change by long press 3s.

4. ” + +”” – -” button, to adjust the temperature, time, and program.

5. ” ►/11 Start/Pause” button, to start the cooking or pause the cooking.

6. ” on/off”, button.

Specifications

INSTRUCTIONS FOR USE

Quick start
Baking “frozen fries” as an example (other ingredients can also refer to the following steps):

• Please rinse the cages and oil catch pan before use.
• Before the first use, set the working temperature to the maximum and dry fry for 10 minutes.

Take the semi-finished frozen fries purchased from the supermarket out of the freezer pour them onto the baking sheet inside the frying cages and lay them flat, dividing them into 3 portions and putting 1/3 of the amount in each layer.

Tips:

1. Please take the proper amount of frozen fries as you need, and lay the frozen fries flat on the baking sheet, do not stack the ingredients too high.
2. When cooking other ingredients, marinate the ingredients before baking according to your taste.
3. If the cooking temperature and time required for several ingredients are similar, it can be baked at the same time.
4. When baking whole chickens or other large pieces of food, remove the divider at the bottom of each cage layer to make the 3 layers of cages become one large whole piece.

Place the oil catch pan on the spindle, and place the rotating cage with the food placed on the oil catch pan and close the cover.

Note:

• Note that the cover should be fastened to the fixed snap in the front position first.
• Plug in the power, the power switch button on the screen flashes, check the menu on the left side of the screen, and press the menu button to 01 Recipe (French Fries), then press the Start/Stop button, the machine starts working at this time.

Tips

1. Select the menu to correspond with the food being cooked.
2. If the food is not in the list of menus, please press the Clock/Temperature button, adjust the parameters by+/- button to set the needed cooking time and temperature, and then press the Start/Stop button to start the machine.
   When the product sounds like a beep, it means the cooking is finished, remove the aluminum cover, and remove the rotary cages, and take out the food with the clips.

Attention

1. After the frying finished, wait for the fan to stop running for 1-2 minutes before removing the aluminum cover to take the food is better.
2. When the frying is just finished, the basket and oil catch pan is in a high temperature state, please do not touch them with your hands to prevent scalding.

Cleaning and Maintenance

Before cleaning and maintaining the air fryer, please disconnect the power and leave the product to cool to a safe temperature or room temperature.

1. Air fryer surface:
   The surface of the air fryer could be cleaned by wiping with a dry soft cloth, or wiping with a dry soft cloth dipped in a neutral cleaner (such as a household cleaning agent).

2. Inside:
   For stains attached to the air fryer inside, you could dilute the proper amount of cleaner with water and apply it to the surface of the inside, leave it for about 10 minutes, then use a soft cloth dipped in water to wipe away the residual cleaner.

3. Rotary cages, oil catch pan, aluminum cover:
   For oil stains and food residues on the cages, oil catch pan and aluminum cover, you could rinse the food residues and oil stains on the surface with water first, then put them into the cleaner and water and wipe them with a soft cloth to clean.

Note:

1. Do not use a wire ball to wipe the surface of the cage, oil catch pan, and aluminum cover with non-stick coating.
2. The cages and oil catch pan are dishwasher safe.

TROUBLESHOOTING

Unable to turn on after

| ****

The power supp ly does not

| ****

Change the rating

power on.| match the rating requirements.| requirements power.
 | Socket failure, no power.| Socket failure, no power.

The electronic control board shows work, but the

| ****

The heating tube terminals off.

| ****

Insert the terminals.

machine does not heat.|  |
 | Heat pipe damage.| Replace the heat pipe.

The machine stops working

| ****

NTC damage, thermal

| ****

Replace the NTC, fuse.

after a period of working| protection fuse.|
heating and cannot be|  |
turned on.|  |
 | Heat pipe relay damage.| Replace the power board.

The electronic control board

| ****

Shaded-pole motor

| ****

Plug in terminals.

shows work, the heating| terminals fall off.|
tube is abnormally red, the|  |
back fan does not rotate.|  |
 | Damaged shaded-po le| Replace the motor.
 | motor.|

When working, the cage

| ****

Oil catch pan not installed

| ****

Install the oil catch pan.

does not rotate.| or not installed on the shaft.|
 | Synchronous motor| Plug in terminals.
 | terminals fall off.|
 | Synchronous motor damage.| Replace the motor.
 | Lost spindle.| With spindle.

When working, strange

| ****

The rotating cage is not

| ****

Realignment of the

noise occurs in the rotating| installed well and touches| assembly.
cage.| the grid or outer cover.|

Rimoo (Foshan) Electrical Appliances Co., Ltd.
Karen@rimoo.com.cn

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>