DEEPMOTO D10 Dash Cam User Guide

Table of Contents

DEEPMOTO-D10-Dash-Cam-poduct

DEEPMOTO-D10-Dash-Cam-fig-1

D10 Series Installation Quick Guide:

To install the dash-cam, choose a Dash-cam Fixed Support package for installation.
Install the front camera and rear camera.
Install the power supply and connect the power supply with various parts.
Install the GPS module.
Install tire pressure (only D10Plus is equipped with tire pressure equipment).

There are colored stickers on the wiring ports of the host and accessories. Please check carefully when connecting, and do not make mistakes
When installing the GPS module, try to place it outside the vehicle body or in the side plastic cover, and try to keep it away from metal parts to avoid affecting signal reception.
When installing the camera, the “D” mark (white triangle mark) is facing upwards, which is the positive direction. Be careful not to tilt the direction of the lens towards the sky.
After installing the machine, you need to calibrate the tilt angle. When calibrating, the front of the motorcycle should be straightened. First, check whether the angle display is 0. If it is not 0, you need to calibrate. Go to the menu and find the horizontal calibration option to calibrate.
Before installing the tire pressure, it is necessary to install the anti-theft nut at the position of the tire valve first, and then install the tire pressure to prevent the tire pressure from being stolen. (only D10Plus is equipped with tire pressure equipment)

D10 Series Dash-cam Use And Precautions:

Insert a TF card into the host, 64G or 128G is recommended to store recorded videos and photos, The TF card needs to be purchased by yourself.
After the dash-cam is installed, start the motorcycle, and the host will automatically turn on.
It cannot be used on ordinary electric motorcycles, because the safety voltage of the dash-cam is 36, and the voltage of general electric motorcycles is 60V, which may directly burn out the dash-cam. To use it, an additional voltage converter is required.
When the motorcycle is driving, it is recommended to turn off the WiFi and turn on the WiFi when downloading pictures and videos on the mobile phone. Turning on WiFi while driving may interfere with the microphone, causing some electrical noise in the recorded video.
This machine is 1P67 waterproof. Although it is waterproof, please do not use a high-pressure water gun to wash the dash-cam, because the water gun has a strong impact and may damage the machine.

Shenzhen Shendu Software Co., Ltd.
www.deepdesign.com.cn
Deepmotoservice@163.com
308, Building A, Wenle Industrial Zone, Longzhu Community Xixiang Street, Bao a District, Shenzhen, 518102