BOSCH SMV6EMX75Q Dishwasher User Guide

BOSCH SMV6EMX75Q Dishwasher

Product Information

Specifications:

• Water Hardness Settings: Soft (0 – 1.4 mmol/l), Medium (1.5 – 8.9 mmol/l)
• Programmes:
  • Duration: Varies per programme
  • Energy Consumption: Varies per programme
  • Water Consumption: Varies per programme

Product Usage Instructions

Setting up Home Connect:

1. Install the Home Connect app on your mobile device.
2. Follow the instructions in the app.
3. Scan the QR code with the Home Connect app.

Water Hardness Settings:
Adjust the water hardness settings based on your water’s hardness level by following these steps:

1. Press the designated button to access the settings.
2. Use the controls to set the appropriate water hardness level.
3. Save the settings by pressing the save button.

Adding Special Salt and Rinse Aid:

1. For special salt:
2. Unscrew the lid of the dispenser and fill it with water initially.
3. Add special salt just before starting a program.
4. For rinse aid:
5. Add rinse aid up to the max mark in the dispenser.
6. Close the lid securely.

Programmes:
Select the appropriate program based on your needs. Refer to the provided data for each program’s duration, energy consumption, and water usage.

Machine Care:
Use the designated program for machine care to ensure optimal performance and longevity of your appliance.

Adding Detergent:

1. Add the specified amount of detergent to the dry detergent dispenser.
2. Close the lid securely.

How to Use Your Appliance:

1. Load suitable tableware into the dishwasher after removing large food remnants.
2. Add detergent to the dispenser.
3. Switch on the appliance.
4. Select the desired program.
5. Start the program and wait for it to complete.
6. Remove the tableware at the end of the program.
7. To cancel a program, press the designated button for about 4 seconds.

FAQ:

• Q: How often should I add rinse aid?
  A: Add rinse aid whenever it falls below the maximum mark in the dispenser to ensure effective cleaning and drying results.

• Q: Can I use regular salt instead of special salt?
  A: No, it is recommended to only use special salt designed for dishwashers to prevent damage and ensure optimal performance.

Before using it for the first time, read the instruction manual and the safety information it contains.

Setting up Home Connect

Tip:
Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect app.

1. Install the Home Connect app on your mobile device and follow the instructions.
2. Scan the QR code with the Home Connect app.

Overview of water hardness settings

You can find an overview of the water hardness values that can be selected here. A table of country-specific units can be found in the instruction manual.

Setting the water softening system

1. Press .
2. To open the basic settings, press Setup 3 sec for 3 seconds.
   • The display shows H: xx.
   • The display shows ⁠Set.
3. Press – or + repeatedly until the right water hardness has been set.
4. To save the settings, press Setup 3 sec for 3 seconds.

Programmes

• The programme data has been measured in the laboratory according to European standard EN 60436.
• The consumption figures depend on the programme and additional function selected.
• The running time will change if the rinse aid system is switched off or rinse aid needs to be added.

Operating Instruction

Adding special salt
To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the program starts.

1. Unscrew the lid of the dispenser for special salt and remove it.
2. On initial start-up: Fill the dispenser right up with water.
3. Add the special salt to the dispenser. The water in the dispenser is displaced and forced out. Never add detergent.
4. Place the lid back on the dispenser and turn to close.

Adding rinse aid

1. Press the catch on the lid of the dispenser for rinse aid 1 and lift 2.
2. Add rinse aid up to the max mark.
3. Close the lid of the dispenser for rinse aid.
   • The lid clicks into position.

Adding detergent

1. Add the detergent to the dry detergent dispenser.
2. Close the lid of the detergent dispenser.
   • The lid clicks into position.

How to use your appliance

1. Load the tableware.
   Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware. Check that the spray arms can rotate freely.

2. Add detergent.

3. Switch on the appliance .

4. Select the program.

5. Start the program ⁠Start.

6. Remove the tableware at the end of the program.

7. To cancel the program, press Reset 4 Sec. for approx. 4 seconds. The program is canceled and ends after approx. 1 minute.

Cleaning filters

1. After each wash check the filters for residue.
2. Turn the coarse filter anticlockwise 1 and remove the filter system 2.
3. Pull down the microfilter to remove it.
4. Press the locking catches 1 together and lift the coarse filter out 2.
5. Clean the filter elements under running water.
6. Re-assemble the filter system.
7. Insert the filter system into the appliance and turn the coarse filter clockwise. Make sure that the arrow markings match up.

Cleaning spray arms

1. Unscrew the upper spray arm 1 and pull down to remove 2.
2. Pull up the lower spray arm to remove it.
3. Check the outlet nozzles on the spray arms for blockages under running water and remove any foreign bodies.
4. Insert the lower spray arm.
   • The spray arm clicks into position.
5. Insert the upper spray arm and screw it firmly in place.

Clean wastewater pump

1. Disconnect the appliance from the power supply.
2. Remove the filter system.
3. Scoop out any water.
4. Prise off the pump cover using a spoon and grip it by the crosspiece.
5. Lift the pump cover inwards at an angle and remove it.
6. Remove any remnants of food and foreign bodies in the area of the impeller.
7. Insert the pump cover 1 and press down 2.
   • The pump cover clicks into position.
8. Install the filter system.

Troubleshooting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>