FOHERE DN20M-ML Air Fryer Toaster Oven Combo Instruction Manual

FOHERE DN20M-ML Air Fryer Toaster Oven Combo

Product Information

Specifications :

• Model: DN20M-ML

Standard Accessories:

• Chromed wire rack

Optional Accessories:

• Crumb tray
• Fry basket
• Enamel baking tray
• Tray handle

Product Usage Instructions

Important Safeguards

1. Read all instructions first.
2. Do not use this oven together with other electric appliances with high power, in case of overload.
3. Do not touch hot surfaces when it’s working or just finished working.
4. Always wear protective, insulated oven gloves when inserting or removing items from the hot oven.
5. Close supervision is necessary when any appliances are used by or near children.
6. Do not use this oven without supervision by an adult.
7. To protect against electric shock, do not immerse the cord, plug, or any parts of the oven in water or other liquid. Please make sure the plug is dry before use.
8. To protect against electric shock, do not touch, plug into, or plug out the plug when your hand is wet.
9. To protect the power cord, do not hang anything on it or nip it; do not modify the cord in any way.
10. Please unplug the oven when you see smudginess come out from the food inside the oven, and do not open the glass door at that time; just open the glass door after the smudginess moved.
11. Do not use the appliance if you find any damage or even dropdown. Please send it back to the relative repair center for inspection or repair. Do not use parts that are not from the original manufacturer.
12. To disconnect, turn any control to off, then remove the plug from the wall outlet.
13. Do not use the appliance for other than intended use.
14. Use extreme caution when removing the tray or disposing of hot grease.
15. Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts, creating a risk of electric shock.
16. Oversized foods or metal utensils must not be inserted in a toaster-oven as they may create a fire or risk of electric shock.
17. A fire may occur if the toaster oven is covered or touching flammable material.

Before Using Your Oven Toaster

1. Read all of the instructions included in the manual.
2. Make sure that the oven is unplugged and the Time control is in the OFF position.
3. Wash the accessories in hot soapy water or in the dishwasher.
4. Thoroughly dry all accessories and re-assemble them in the oven, plug the oven into an outlet.
5. Set the temperature on the toast function for approximately 15 minutes to eliminate any packing residue that may remain after shipping. This will also remove all traces of odor initially present.
6. Please note: Initial start-up operation may result in minimal smell and smoke. This is normal and harmless. It is due to the burning of the protective substance applied to the heating elements in the factory.

Display Function

The display function of the air fryer oven is not provided in the manual text extract.

FAQ

Q: What should I do if I see smudginess come out from the food inside the oven?

A: Please unplug the oven and do not open the glass door at that time. Wait until the smudginess has moved before opening the glass door.

Q: Can I use accessories that are not from the original manufacturer?

A: No, it is recommended to only use parts that are from the original manufacturer to ensure safety and proper functionality of the air fryer oven.

NAME OF PARTS

1. Function Selection Knob
2. “START / CANCEL” Button
3. LED Display
4. “TIME / TEMP” Button
5. “TIME / TEMP” Selection Knob

STANDARD ACCESSORIES

OPTIONAL ACCESSORIES:

IMPORTANT SAFEGUARD

When using electrical appliances, basic precautions should always be followed, including the following:

1. Read all instructions first.
2. Do not use this oven together with other electric appliance with high-power, in case of overload.
3. Do not touch hot surfaces when it’s working or just finished working.
4. Always wear protective, insulated oven gloves when inserting or removing items from the hot oven.
5. Close supervision is necessary when any appliances are used by or near children.
6. Do not use this oven without supervision by adult.
7. To protect against electric shock, do not immerse cord, plug, or any parts of the oven in water or other liquid. Please make sure the plug is dry before use.
8. To protect against electric shock, do not touch,plug into or plug out the plug when your hand is wet.
9. To protect the power cord, do not hang anything on it or nip it; do not modify the power cord; do not pull or twist the power cord; please hold the plug steady when you plug in or plug out.
10. Do not let cord hang over edge of table or counter, or touch hot surfaces.Do not use this appliance when the power cord is in a enlacement.
11. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts..
12. This appliance is for household use only. Do not use outdoor or for commercial use, we will not take any repair responsibility if the user didn’t use this appliance according to the manual.
13. When operating the oven keep at least four inches of space on all sides of the oven to allow for adequate air circulation, and the operating platform should be fat and dry.
14. Do not place on or near a hot gas or electric burner, or in a heated oven or in a microwave oven.
15. Do not cover any part of the oven with metal foil.
16. Oversized foods or metal utensils must not be inserted in a toaster oven as they may create a fire or risk of electric shock.
17. Do not place any of the following materials in the oven: cardboard, plastic, paper, or anything similar.
18. Please make sure the appliance is unplug and cool before you want to move or clear it.
19. The use of accessory attachments not recommended may cause hazard or injury.
20. Do not put anything on the oven, especial on the glass door when it’s open.
21. Please use tinfoil to enwrap the food which will produce oil or juice when operating and put on the bake tray, in case of a fire.
22. Please make sure the tinfoil unconnected with the heating elements, in case of a fire.
23. Do not move this appliance when it’s operating or when it’s hot or when it has something inside.
24. Please unplug the oven when you see smudginess come out from the food inside the oven, and do not open the glass door at that time; just open the glass door after the smudginess moved.
25. Do not use appliance if you find any damage or even drop down. Please send it back to the relative repair center for inspection or repair. Do not use the parts which is not from the original manufacturer.
26. To disconnect, turn any control to “off”, then remove plug from wall outlet.
27. Do not use appliance for other than intended use.
28. Use extreme caution when removing tray or disposing of hot grease.
29. Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts, creating a risk of electric shock.
30. Oversize foods or metal utensils must not be inserted in a toaster-oven as they may create a fire or risk of electric shock.
31. A fire may occur if the toaster-oven is covered or touching flammable material, including curtains, draperies, walls, and the like, when in operation. Do not store any item on top of the appliance when in operation.
32. Extreme caution should be exercised when using containers constructed of other than metal or glass.
33. Do not store any materials, other than manufacturers recommended accessories, in this oven when not in use.
34. Do not place any of the following materials in the oven: ( that is, paper, card- board, plastic, and the like).
35. Do not cover crumb tray or any part of the oven with metal foil. This will cause overheating of the oven.
36. Press “Cancel” button to turn off appliance.

BEFORE USING YOUR OVEN/TOASTER

Before using your toaster oven for the first time, be sure to:

1. Read all of the instruction included in the manual.
2. Make sure that the oven is unplugged and the Time control is in the “OFF” position.
3. Wash the accessories in hot soapy water or in the dishwasher.
4. Thoroughly dry all accessories and re-assemble in oven, plug oven into an outlet and you are ready to use your new toaster oven.
5. After –reassembling your oven, we recommend that you run it at the highest
   temperature on the toast function for approximately 15 minutes for eliminate any packing residue that may remain after shipping. This will also remove all traces of odor initially present.
   Before using your toaster oven for the first time, be sure to:

Please note : Initial start-up operation may result in minimal smell and smoke. This is normal and harmless. It is due to the burning of the protective substance applied to the heating elements in the factory

DISPLAY FUNCTION

1. The display effect is shown in below figure .

2. The control uses encoder knobs and touch keys, a total of 4 selection keys.Its definition is shown in below figure

OPERATION GUIDE

Key Function Introduction is as below:

1. “ FUNCTION” Function knob: In standby mode, turn clockwise or counterclockwise to select the corresponding function.
2. “TIME / TEMP ” Function knob: After selecting the corresponding function, turn clockwise or counterclockwise to adjust the temperature under the default temperature flashing state display. Press ” TIME / TEMP ” to switch to the time flashing status display and set the time.Some menus in preset menus are not adjustable in temperature and time(Refer to the function default parameters later).Temperature adjustment with 5°F as a level for addition and subtraction.
3. “START / CANCEL ” Button: In standby mode, when a function mode is selected, press this key to enter the working state.At the same time, in the working state, press this key to pause the work, all settings can be canceled and cleared.You can also press and hold this key for 3S to cancel and clear all settings. When the power is just switched on, the system background starts the automatic timing at 0:00.

OPERATION METHOD IS AS BELOW

1. The preset temperature of the preset program is displayed and blinking to remind the user whether to adjust. Turn the “TIME / TEM” function knob clockwise or counterclockwise to adjust to the desired temperature, and then press the ” TIME / TEMP ” key to confirm all Set the temperature to set the time.When the time display blinks, turn the “TIME / TEMP” function knob clockwise or counterclockwise to adjust to the expected time. You can also omit and press “Start / Cancel” directly to confirm the default temperature and start time.
2. In the oven operating state, the temperature time allows the user to adjust.After pressing the “START/CANCEL” key, the temperature in the display screen will be in flicker state. Rotate the “TIME/TEMP” function knob clockwise or counterclockwise to adjust the required temperature, or directly press the (TIME/TEMP) key to set the TIME, the TIME display will flicker, rotate the “TIME/TEMP” function knob clockwise or counterclockwise to adjust to the desired TIME.
3. TOAST function, the default time and temperature of the toast are not adjustable, At the Top of the temperature display position, indicates the color of the bread slices, and the number of slices ( ) is displayed at the time position. Select the TOAST function, the default color setting is forth gear . Turn the ” TIME / TEMP ” function knob clockwise or counterclockwise to adjust the color setting of the bread, then press the ‘TIME / TEMP’ button again to switch the number of bread slices and set the time. hen start the (START / CANCEL) button to work. The maximum temperature on the display is 450°F and the default time is  displayed.
4. After the function selection is completed, press the ” START / CANCEL ” button to start working.
5. If you don’t press it, the previous design will automatically fail after 1 minute, and the time will switch back to the clock display state. If the function or time key is not selected, but other keys are pressed first, there is no other effective response, and the clock display will not change to the function menu preset time display.
6. As mentioned above, there is no selection or adjustment action. After 1 minute, the time is switched back to the clock display state.
7. In the function selection and setting process in the standby state, if the machine has an internal light, the internal light does not turn on.
8. When selecting a function gear, the selected gear blinks, other function gears are not displayed.

FUNCTION DEFAULT PARAMETERS

Mode| Default time| Default temperature| Baking time| Baking temperature| Default load working status
---|---|---|---|---|---
| 25Min| 400°F| 1-120

Min

| 150-450°F| Top heating element (4PCS) + Hight speed fan

|

/

|

450°F

|

\

|

\

| Top heating element (2PCS) +Bottom heating element (2PCS)

|

25Min

|

400°F

|

1-120

Min

|

150-450°F

| Top heating element (2PCS) +Bottom heating element (2PCS)
| 10Min| 400°F| 1-120

Min

| 150-400°F| Top heating element (2PCS)

|

20Min

|

400°F

|

1-120

Min

|

150-400°F

| Top heating element (2PCS) +Bottom heating element (2PCS) +

Low speed fan

| 10Min| 400°F| 1-120

Min

| 150-400°F| Top heating element (2PCS) +Low speed fan
| 30Min| 150°F| 1-120

Min

| | Bottom heating element (2PCS)

1. LED display sets function gear, temperature, time and stays on.

2. Time display colon flashes, WARM file is decremented by 1min, others are decremented by 1s.

3. You can add or subtract time during work. If the temperature is adjustable, you can add or subtract time. However, you cannot change the menu function during work. Pressing it has no effect and the buzzer does not sound.Working temperature and time allow consumers to adjust. After pressing the ” START / CANCEL ” key, the temperature in the display is flashing. Turn the ” TIME / TEMP ” function knob clockwise or counterclockwise to adjust Temperature, or directly press the (” TIME / TEMP “) key to enter the time setting.When the time display flashes, turn the ” TIME / TEMP ” function knob clockwise or counterclockwise to adjust to the time.If you do not press the temperature or time key to confirm, the program
   cannot be confirmed automatically.During work, you can press ” START / CANCEL ” to pause. Press again to resume work. During the pause, the selected function position is blinking. If there is no other operation, the display will switch to show the clock time

4. time.If you do not press the temperature or time key to confirm, the program cannot be confirmed automatically.During work, you can press ” START / CANCEL ” to pause. Press again to resume work. During the pause, the selected function position is blinking. If there is no other operation, the display will switch to show the clock time

END OF WORKING

1. Shows End, the first two digits and the colon are not shown.
2. Buzzer sounds for 5s.
3. The internal lights, the lights continue to light.
4. The corresponding menu icon in the display continues to light.
5. Within 3 minutes (including) the previous menu related consumer settings are valid. Just press the “START / CANCEL “key to repeat the previous baking action. Of course, you can also adjust the settings before working.
6. If there is no action after 3 minutes, all consumers set remove memories, the display function icon is no longer displayed, and the time display is switched back to the clock display(If the internal lighting is off).
7. After the work is completed, press and hold the” START / CANCEL “button for more than 3s, it will be regarded as shutdown, which is equivalent to the previous state

DURING STANDBY:

1. During standby, press any function knob to change the wake-up LED display.
2. During standby, if you first operate the “FUNCTION” function knob, you will enter the function setting and confirmation state.
3. During standby, if you first operate the TIME / TEMP function knob, press ” TIME / TEMP “and “S TART / CANCEL “, the time will only be displayed.

SMART CARE

1. Touch the “START / CANCEL” key immediately and hold for more than 3 seconds, the program will automatically enter to the self-testing mode.

2. Full pattern display , keep 3 seconds.

3. All display patterns are off , keep 1 second.

4. Display , work for 2 seconds.

5. Display , work for 2 seconds.

6. Display , work for 2 seconds.

7. Display, work for 2 seconds.

8. Display, work for 2 seconds.

9. Display, work for 2 seconds.

10. Display , work for 2 seconds.

11. Display current temperature value, keep 3 seconds.

12. The oven buzzer will ring for 2 seconds and display screen will back to original
    state after finish self-testing.

13. If notice of abnormal, the buzzer will continuously ring until the power is unplugged.

14. In the process of operation, when the temperature sensor is short-circuit or open circuit, all function of the system will stop working immediately (except the inner lamp). The buzzer will ring for 3 times and the digital screen will only display“E1″ or“E2″ to alert the user.

MAINTENANCE AND CLEANING

1. Allow the appliance to cool and unplug from the outlet before cleaning.
2. You must clean the appliance after each use to prevent an accumulation of grease and avoid unpleasant odors.
3. Do not immerse the appliance in water or wash it under a waterspout.
4. The removable wire rack and bake pan can be washed, as normal kitchenware.
5. Clean the outside of the appliance with a damp sponge.
6. Do not use abrasive cleaners or sharp utensils to clean the oven, as scratching may weaker it and cause shattering.
7. Let all parts and surfaces dry thoroughly prior to plugging oven in and using it.

DISPOSAL:

Old appliances must be put out of order. About the latest ways for disposal contact at your retailer or at your local authority.

REPAIRS:

Danger: Electrical appliances must only be repaired by authorized specialists, Because damages can occur by non-authorized repairs. In the case of a repair, contact your retailer or contact the producer

HOUSEHOLD USE ONLY

• Manufacturer/Hersteller: Shenzhen Foduosi Trading Co., Ltd.
• Address/Adresse :1403, Block 4, Haixuan Plaza, No.89 Jinlong Road, Luogang Community, Buji Street, Longgang District, Shenzhen
• Facebook Page : http://www.facebook.com/foherehome
• Email: [email protected]
• Web: www.fohere.com

MADE IN CHINA

References

• state.at is available for purchase - Sedo.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>