cobiemod 2.0 Wireless Charger Cubie Via Brand Stand Instruction Manual
- May 15, 2024
- cobiemod
Table of Contents
copied 2.0 Wireless Charger Cubie Via Brand Stand
Introduction
Thank you for purchasing the Brandstand CubieMod® 2.0. Please be sure to read this User Manual carefully to ensure proper installation. The information in this document is subject to change and does not represent a commitment on the part of Brandstand. No part of this document may be reproduced, transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, or translated into any language for any purpose other than the purchaser’s personal use, without the written permission of Brandstand.
Product Features
- Convenient connections for AC and USB-powered devices
- Efficient and stylish design with multiple mounting options
- Overcurrent Protection
Product Description
- 1 Tamper Resistant AC outlet
- Qi Wireless Charger
- 1 USB-A port
- 1 USB-C port
- 1.8m 3*1.5mm2 Power Cord
- All Mounting Hardware Included
Technical Specifications
- Continuous Duty Electrical Rating
- UK: 250VAC 13A 50160Hz 3250W
- Saudi: 230VAC 13A 50/80Hz 2990W
- AC Outlets Output
- UK: 250V 13A
- Saudi: 230V 13A
- Housing Material
- Working Surroundings
- Indoor Fixed Mount
- Powered USB Output
- Single USB-C Output (30W Max): 5V=3A or 9V=3A or 12V = 2.5A
- Single USB-A Output (12W Max): 5V=2.4A
- Double Port Output (32W Max)
- USB-C Output(20W Max): 5V=3A or 9V=2.22A or 12V=1.67A
- USB-A Output (12W Max): 5V-2.4A
- Wireless Output: Up to 10W
- Working Temperature
Important Safeguards
- CAUTION: Do not install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and the electrical service panel. Ensure the unit is plugged into an AC outlet per “Technical Specifications”.
- The use of incorrect outlets could cause the unit to malfunction or catch fire.
- To reduce the risk of fire or electrical shock, do not use this device with a receptacle in which the slot openings do not align with the blades.
- Do not allow children to operate the unit without adult supervision.
- Always ensure the product is unplugged from the electrical outlet before relocating or cleaning it.
- Keep the power cord and product away from heated surfaces.
- The unit should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on or around the product. It should not be used with aquariums or other water-related products.
- Do not place or drop the product into water or other liquids. If the product falls into water, immediately unplug it from the electrical outlet.
- Do not put any stress on the power cord where it connects to the product as the power cord could fray and break.
- Do not plug/unplug the product into/from the electrical outlet with a wet hand.
- Do not operate the product if it has a damaged or cut power cord or adapter, if wires are exposed if it malfunctions if it is dropped or damaged, or if it is dropped in or exposed to water.
- Place unit where there is good air circulation.
- The product has no user-serviceable parts. Do not attempt to examine or repair this product yourself. Only qualified service personnel should perform the servicing.
- No open flame sources, such as candles should be placed on the product.
- The product should only be used indoors and in dry locations.
Limited 1-Year Warranty
Products are warranted by Brandstand against manufacturing defects in material
and workmanship under normal use for one year from the date of purchase.
Defective products will be exchanged for the same or comparable item.
Return Policy
For a refund or exchange, products must be returned within 30 days of the
original purchase date. Customers must contact Brandstand to obtain a Return
Merchandise Authorization (RMA) number and specific shipping instructions
before returning the product. Any product returned without an RMA will be
refused. The product must be in its original box with original accessories and
packaging undamaged, clean and in brand-new condition. Products that are
incomplete, damaged or have been used will require a deduction in a refund.
There is a 30% restocking fee on all returned products. Refunds will be issued
by check. Refund checks are mailed on the 10th day from the date the product
is returned. Delivery charges and customized products are non-returnable.
Disclaimer of Damages
In no event shall Brandstand Products, or its suppliers, be liable for
indirect, incidental, or consequential damages, loss of profit, loss of use or
data, or interruption of business, whether the alleged damages are labelled in
tort, contract, or indemnity, even if Brandstand Products or its suppliers has
been advised of the possibility of such damages. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above
limitation may not apply.
Important
This product’s USB outlets cannot be used as a USB hub and do not transmit
data. The powered USB outlets on this unit are intended solely for charging
devices that can be charged via a USB interface.
The Brandstand Difference
- Complies with IEC 62368-1 (Audio/Video, Information and Communication
Technology Equipment)
- Complies with UL 962A (Furniture Power Distribution Units) and includes Liquid Spill
- Testing. For enhanced safety, the Cubie Product Line was designed for and successfully passed a UL spill test conducted by our ETL testing lab.
- Complies with VDE 0620-2-1 (General requirements on Plugs and portable socket outlets) and includes safety testing
- Brandstand is a member of the Qi Wireless Power Consortium
Unpacking and Set up
Carefully remove from packaging. Verify that you have all necessary components
before you dispose of the box and packaging.
Component List
- CubieMod Main Unit
- CubieMod Faceplate
- 2 Mounting Brackets, 4 Pan Head Screws, 2 Allen Bolts (Option #1)
- 4 Flat head, Wood Screws .75” (Option #2)
CubieMod – Installed
CubieMod – Installation Guide
Note: This product is designed to be used on a level, stable, flat
surface such as a table, desk, shelf or stand, convenient to an AC outlet, out
of direct sunlight and away from sources of excess heat, dust, moisture or
vibration.
Cut Template
Attached Cut Template (included in the box, or found on our website) for the
desk surface with tape. Follow the instructions on CubieMod Cut Template
CubieMod Mounting Option #1 (using brackets provided)
Measure your desktop’s countertop thickness. Supplied bracket is reversible to
accomodate desktops or countertops 1/2” to 2” thick.
- Position CubieMod in cutout.
- Fasten 2 brackets to the bottom of the unit with 4 machine screws provided
- Secure CubieMod to the desk by tightening the 2 Allen bolts.
- Plug directly into a wall AC outlet. Do not plug into another surge protector or extension cord.
CubieMod Mounting Option #2 (Front Mount)
- Position CubieMod in cutout.
- Fasten the main unit to the tabletop with 4 flat heads, wood screws
- Snap faceplate to the main unit.
- Plug directly into a wall AC outlet. Do not plug into another surge protector or extension cord.
Bandstand
1219 Digital Dr. Suite 100
Richardson, TX 75081, USA
877-843-3681
www.brandstand.com
2023 TXS Industrial Design Inc. d.b.a. Brandstand Products CubieMod and Brandstand are registered trademarks of TXS Industrial Design, Inc. in the United States
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>