Goldair GCEV340 4L Evaporative Cooler Instruction Manual
- June 4, 2024
- GOLDAIR
Table of Contents
GCEV340 4L Evaporative Cooler
Instruction Manual
General Care and Safety Guide
Thank you for choosing this Goldair product. This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care, as described in this leaflet, will give you years of useful service. Please read these instructions carefully and keep them for future reference.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
- Ensure that the fan is switched off from the supply mains before removing the guard.
- Use only the voltage specified on the rating plate of the appliance.
- Keep all objects at least 1 Metre from the front, sides, and rear of the appliance
- This appliance is intended for household use only and not for commercial or industrial use.
- Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock or injury.
- The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills.
- Always unplug appliances when not in use.
- When the appliance has been unpacked, check it for transport damage and ensure all parts have been delivered. If parts are missing or the appliance has been damaged, contact the Goldair Customer Services Team.
- If your appliance does not work or is not working properly, contact the place of purchase. Repairing work on the appliance by unqualified persons can cause serious risks to the user.
- Ensure hands are dry before handling the plug or the main unit.
- Carry out regular checks of the supply cord to ensure no damage is evident.
- Ensure that the cord is fully extended (not coiled) while in use.
- Avoid contact with the moving parts. Keep hands, hair, and clothing, away from the blade of the fan during operation to reduce the risk of injury to a person and/or damage to the unit.
- Switch off and use the handles provided when moving.
- It is recommended that this fan is plugged directly into the wall socket.
- A correctly specified, undamaged extension cord may be used with this fan provided it is used in a safe manner.
- Never place appliance close to a radiant heat source.
- Never operate in areas where petrol, paint, or other flammable liquids are used or stored.
- Never use the appliance to dry clothes.
- Never insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the appliance.
- Never use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet) and rinsed in hot soapy water only. Always remove the plug from the mains supply before cleaning.
- Never connect the appliance to the mains supply until completely assembled and adjusted.
- Never remove the plug from the power socket until the appliance has been switched off.
- Never remove the plug from the power socket by pulling the cord – always grip the plug.
- Never twist the kink or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that all cord has been removed from any cord storage area and is unrolled before use.
- Never use this appliance in the immediate surroundings of a bath, a shower, a swimming pool, or other liquids. The appliance must not be immersed in any liquids.
- Due to the risk of injury, never use this appliance for any purpose other than its intended use. This appliance is intended for use in households and similar applications such as staff kitchen areas in shops, offices, and other working environment; farm houses, by clients in hotels, motels, bed and breakfast type environments and other residential-type environments
- Never use this appliance outdoors.
- Never operate the appliance with a damaged cord or plug, after it malfunctions, or if it has been damaged in any manner. Has the appliance been checked and repaired by a qualified electrician if repair is necessary?
- Never place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.
T
Model Na: GCEV34O
Supply: 220-240VAC 50Hz
Wattage: 80W
Approval No: GMA-50766&-EA
MADE IN CHINA
QC Passed: PO#-WVVYY
CUSTOMER SUPPORT
NEW ZEALAND PH: 0800 232 633
AUSTRALIA PH: 1300 465 324
The remote control supplied with this heater uses a CR2025 coin-type battery.
DANGER IF SWALLOWED
Keep batteries out of reach of children. Swallowing may lead to serious injury
or death in as little as 2 hours due to internal burns.
If swallowed, go straight to a hospital emergency room.
Dispose of used batteries immediately.
WARNING!
DANGER IF SWALLOWED
Keep batteries out of reach of children. Swallowing may lead to serious injury
or death in as little as 2 hours due to internal burns.
If swallowed, go straight to a hospital emergency room.
Dispose of used batteries immediately.
Components
Operating your Fan
Always choose a safe location for the appliance, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the appliance
before use. This appliance requires no installation, it should be used solely
as a portable appliance.
WARNING: Keep all objects at least 1 meter from the front, sides, and
rear of the appliance.
IMPORTANT! NEVER COVER THIS APPLIANCE!
For best operating performance, position the appliance in a location that will
create a ‘flow through’ air effect. The greatest cooling effect will be felt
if the appliance is operated in a partly opened doorway or window with the
‘cool’ conditioned air directed into the room to be cooled. It is important to
also have a door or window partly opened away from the cooler to create this
‘flow through’ effect.
On days of high humidity, the cooling effect may be reduced as the air
entering the filter may already be saturated with moisture. On days like this,
it may be better to switch the cooling feature OFF and operate the appliance
as a fan only.
Filling water tank
Pull out the water tank from the back of the appliance near the bottom. Pour
clean cold water into the water tank until it is just below the MAX level. Use
the water level indicator to ensure the level is between MIN & MAX. If you are
using ice packs, please put these in prior to filling the tank.
When moving the appliance, do so with extreme caution, so as not to spill any
water in the reservoir. The appliance should be moved slowly. Always keep the
appliance upright.
Place
the unit on a dry, level, and sturdy surface.
Ensure the speed control is at the OFF position before plugging the power cord
into the socket.
The ON/OFF LED for the power will light to indicate that there is the power to
the appliance.
On/Off
Turn the appliance ON by pressing the ON/OFF button. The appliance will start
in the default mode of normal/low-speed setting.
Speed
Press speed to change fan speed from ‘high-mid-low’, and the relevant speed
indicator LED will light up.
Timer
If you wish to turn the appliance off at a pre-determined time press the timer
button. The appliance can be set to turn off at any time between 0.5 hours and
7.5 hours.
To set the timer, turn the appliance on at the desired speed, and press the
timer button until the desired run time is illuminated. The fan will turn off
once the time has expired. If no time is selected, the appliance will operate
continuously.
Cool Mode
To initiate the cooling function press the ‘cooler’ button. This function
blows normal air through a water curtain to cool the air. Press the button
again to switch this function off and the appliance will operate in fan-only
mode.
Note: You must have water in the water tank for this function to work. It will
take a few minutes for the cooler air to come out of the appliance.
Wind
Press the ‘Wind’ button to choose either Normal, Natural, or Sleep setting.
Normal – A continuous wind blow that can be adjusted to low, med, and high
speed.
Natural – Natural setting provides a soft and comfortable environment with a
selection of low, medium, and high speeds.
Sleep – WHEN HIGH fan speed is selected, the fan will run at HIGH for 30
minutes, then it will reduce to MEDIUM fan speed for 30 minutes, then it will
change to LOW speed and then continue to operate at the LOW speed until turned
off.
– When MEDIUM fan speed is selected, the fan will run at MEDIUM for 30
minutes, then it will reduce to LOW speed and then continue to operate at the
LOW speed until turned off.
– When the LOW fan speed is selected, the fan will continue to operate at the
LOW speed until turned off.
Swing
Pressing the swing button will make the air guide rotate to better distribute
air.
To stop the rotation, press the swing button again.
Remote control
The remote requires a line-of-sight path to allow for the signal to be
received by the unit. Position the unit so the receiver lens is visible from
the remote control. The symbols on the Remote correspond to the symbols on the
main unit.
Remote control battery
The remote control comes with a CR2025 lithium coin cell battery. To install,
remove the battery cover on the bottom of the remote control. Remove any
plastic protection from the battery and place it in the Remote with the + side
facing out. Then reposition the cover onto the bottom of the remote.
If your remote no longer works, please try replacing it with a new CR2025
battery.
CAUTION do not leave the appliance operating unattended.
IMPORTANT! NEVER COVER THIS APPLIANCE!
Cleaning and Maintenance
When not in use disconnect the appliance from the power outlet and drain all
water from the water reservoir.
To ensure effective humidifying and filtering, it is recommended that the
filtering system be cleaned once every 1-2 weeks.
Before cleaning the appliance, disconnect the appliance from the main supply.
Cleaning the air filter
Remove the air filter cover. Wash the filter in a mild detergent and warm
water solution, then rinse in clean water.
Note: Never use appliances without the air filter.
Cleaning the water curtain
Wash the honeycomb in clean water. A soft brush can be used for cleaning.
Cleaning the water tank
Remove the water tank and Wash the filter in a mild detergent and warm water
solution, then rinse in clean water.
To clean the exterior surfaces simply wipe them over them with a soft damp
cloth.
Should it be necessary, greasy marks may be removed from the surfaces by using
mild soap and a cloth dampened in hot water. Avoid all other types of
detergents, cleaners, or solvents that may contain chemicals that could damage
parts of the appliance.
Thoroughly dry all parts before storage.
Store in a Cool dust-free location for next use.
CAUTION do not immerse or allow the motor or electric cables to come in
contact with any liquid.
Do not attempt to dismantle the appliance. There are no user-serviceable
parts. For service or repair, contact an authorized electrical service
technician.
PROOF OF PURCHASE
To receive a warranty retain the receipt as proof of purchase. (Refer to the
back of the booklet).
| SUPPORT AND TECHNICAL ADVICE
---|---
Goldair – New Zealand
Monday – Friday 8 am-5 pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]| Goldair – Australia
Monday – Friday 8 am-5 pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
[email protected]
One Year Warranty
Thank you for purchasing this Goldair product. Your product is warranted
against faults and manufacture when used in normal domestic use for a period
of one year. In non-domestic use, Goldair limits the voluntary warranty to
three months.
Goldair undertakes to repair or replace this product at no charge if found to
be defective due to a manufacturing fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident,
incorrect installation, or work carried out by anyone other than a qualified
electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits to you given by this warranty are in addition to other rights and
remedies available to you under a law in relation to the goods or services to
which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
In New Zealand, this warranty is additional to the conditions and guarantees
of the Consumers Guarantee Act (1993).
Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland, 0745
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz| Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au
---|---
Goldair Select One-Year Warranty (IMPORTANT: Please complete and retain
this warranty card)
Name: ————————————————-
Address: ———————————————-
Place Of Purchase: ———————————–
Date of Purchase: ———————————–
Name Of Product: ———————————–
Model Number: ———————————–
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User
Manual may differ slightly from the actual product.
New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.goldair.co.nz
Australia
PO Box 574,
South Morang,
Victoria, 3752
www.goldair.com.au