XLB-2P337 3 Tier NSF Metal Shelf Wire Shelving Unit Instruction Manual
- March 10, 2024
- NSF
Table of Contents
**XLB-2P337 3 Tier NSF Metal Shelf Wire Shelving Unit Instruction Manual
**
Warning:
Maximum weight capacity per shelf is 350lbs when equally distributed on feet
levelers.
Failure to follow these instructions may result in serious injury or death of
yourself and people around you.
Some of the part are heavy and/or has shape edge, please install it carefully
to avoid hurt you and people around you.
Caution:
Do not stand on or climb on the shelving unit.
Place heavier items on lower shelves and lighter ones on top shelves.
PACKAGE CONTENTS
-
x 6 Shelf
-
x 48+2 extra Tapered Lock
-
x 8 Pole (with feet leveler p reassembled)
-
x 6 Shelf liner
-
Black plastic spacer
(NOTE: Discard the black plastic spacers E. These between each shelf are only for packing purpose , not for assembling.) -
x 4 Extra Connector
Use it to assemble as 6 Tier Wire Rack If you don’t need expandable features, you take these parts as replacement accessories, just in case.
ASSEMBLY INSTRUCTIONS
-
With the tapered end facing up, snap the two halves of a tapered lock (B) at the desired height on pole (C).
Repeat for the remaining poles (C), making sure the tapered locks (B) are installed at the same grooved line on each pole (C).
Attention: The tapered must be fixed to the groove on the pole, and make sure the tapered does not slip before installing the shelf. -
Rest shelf (A) on its side, then insert the poles (C) through the corner holes of the shelf **(A).
**
-
Turn assembly upright and push the shelf (A) firmly onto the tapered locks (B).
Note: Make sure the lip of shelf (A) is facing down and the bottom poles (D) are on the floor. -
Repeat steps 1-3 for the remaining shelves (A).
-
Place the shelf liner on top of the shelf。Finish.
-
Stack Another Unit On Top as 6 Shelf Wire Shelving Rack (Optional)
a. Remove the pole cap (M) from top of the top pole (C) of the first unit.
b. Then screw the pole connectors(F) onto top pole(C) and bottom pole(C) of the second unit, refer to 6-2.
c. Repeat steps 4-6 for the remaining shelves to assemble unit as 6 shelf wire shelving rack.