NSF 6T5BX-WW 6 Tier Corner Rack Instruction Manual

May 15, 2024
NSF

6-Tier Corner Rack
6T5BX-WWNSF 6T5BX WW 6 Tier Corner Rack

6T5BX-WW 6 Tier Corner Rack

Warning:
Maximum weight capacity per shelf is 600lbs when weight is equally distributed. Maximum entire unit weight capacity is 2100lbs when equally distributed on feet levelers.
Failure to follow these instructions may result in serious injury or death of yourself and people around you.
Some of the part are heavy and/or has shape edge, please install it carefully to avoid hurt you and people around you.
Caution:
Do not stand on or climb on the shelving unit.
Place heavier items on lower shelves and lighter ones on top shelves.

PACKAGE CONTENTS

Attention: Please install it with 2 people !

NSF 6T5BX WW 6 Tier Corner Rack - PACKAGE CONTENTS

(NOTE: Discard the black plastic spacers I.
These between each shelf are only for packing purpose , not for assembling.)

ASSEMBLY INSTRUCTIONS

  1. With the tapered end facing up, snap the two halves of a tapered lock (B) at the desired height on bottom pole (D). Repeat for the remaining bottom poles (D), making sure the tapered locks (B) are installed at the same grooved line on each bottom pole (D).
    NSF 6T5BX WW 6 Tier Corner Rack - ASSEMBLY 1Attention: The wheel (E) must be fully screwed to the botton pole (D) by wrench
    Attention: The tapered must be fixed to the groove on the pole, and make sure the tapered does not slip before installing the shelf

  2. Rest shelf (A) on its side, then insert the bottom poles (E) through the corner holes of the shelf (A).NSF 6T5BX WW 6 Tier Corner Rack - ASSEMBLY 2

  3. Turn assembly upright and push the shelf(A) firmly onto the tapered locks (B).
    Note: Make sure the lip of shelf(A) is facing down and the levelers(F) on bottom poles (E) are on the floor.NSF 6T5BX WW 6 Tier Corner Rack - ASSEMBLY
3

  4. Repeat steps 1-3 for the second shelf (A).NSF 6T5BX WW 6 Tier Corner Rack - ASSEMBLY 4

  5. Screw medium pole (D) onto bottom pole(E), hand tighten.NSF 6T5BX WW 6 Tier Corner Rack - ASSEMBLY 5

  6. Screw top pole (C) onto medium pole(D), hand tighten.NSF 6T5BX WW 6 Tier Corner Rack - ASSEMBLY 6 6-1 Repeat steps 2-4 for the remaining shelves (A).
    Refer to image 6-1 for the assembled unit of stationary option.
    6-2. Repeat steps 2-4 for the remaining shelves (A).
    Refer to image 6-2 for the assembled unit of mobile option.NSF 6T5BX WW 6
Tier Corner Rack - ASSEMBLY 7

  7. Finish.NSF 6T5BX WW 6 Tier Corner Rack - ASSEMBLY 8

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals