Roadmech SC1 Dual Dashcam User Manual

Roadmech SC1 Dual Dashcam

Please read the manual

Product Description

1. Back Clip Fixation Hook
2. USB Data Interface
3. Rear Camera Interface
4. Mode Selection Button
5. OK Power Supply Button
6. Upward Select
7. Down Select
   

Key Function Description

1. Back Clip Fixation Hook : Used for securing the video recording device.
2. USB Data Interface :
3. Used for data transfer to a PC.
4. Used for connecting external power sources, such as a battery charger.
5. Rear Camera Interface: This interface is for connecting a rear camera.
6. Mode Selection Button: Press this button to switch between camcorder, camera, and playback modes.
7. OK Power Supply Button: Short press for powering on/off. In video mode, press this button to start and stop video recording. It’s also used for taking photos.
8. Upward Select: Used for navigating menu options.
9. Down Select: Used for menu navigation.
10. Menu Button: Press this key to access the menu.
11. LCD Screen: Displays images.
12. TF Card Slot : For inserting a memory card.
13. Reset: A reset button for restarting and recovery.
14. Lens: The viewing window.
15. Speaker: This is the sound amplification hole.

Special Functions

Automatic On/Off: When connected to the vehicle’s power, the camera starts recording automatically and saves videos upon shutdown, ensuring no loss of records.
Motion Detection: In standby mode, the camera automatically records motion, ensuring no events are missed.

Basic Camera/Photo Operations

Startup and Shutdown: Press the power button once to turn on (indicated by a blue light). Press it again to turn off. The device will also auto- shutdown when the battery is low.
Camcorder Mode: Short press the mode select button to switch to camcorder mode (indicated by a camcorder icon). Press OK to start recording.
Camera Mode: Short press the mode select button to switch to camera mode (indicated by a camera icon). Press OK to take a photo.
Video/Photo Playback: Short press the mode select/menu key to switch to playback mode (indicated by a playback icon). Use the up and down buttons to select a file, and press OK to play selected videos.
Time Setting: Press the menu button to enter the setting state. Use the OK button to adjust the date and time settings.

Battery Charging

The red indicator light comes on during charging, which takes approximately 180 minutes. Three charging methods are available:

1. Using the power adapter.
2. Using PC-USB charging.
3. Using the car charging port.

Note: In case of a crash due to improper operation, you can remove the battery or press the reset button to reboot the device to restore normal functionality

Product specifications

(Simplified), Chinese (numerous), Korean, etc.
File format| AVI
Video resolution| Maximum 1080 P
Video format| M- JPEG
Loop video| Seamless video, no missing
Mobile detection function| Support
Photographic mode| 500 pixels
Photo format| JPEG
Memory card| TF (maximum support 32 GB)
Microphone| Support
Built in stereo| Support
Video format| PAL/ NTSC
Current frequency| 50HZ/60HZ
USB function| 1: USB-Disk 2: PC camera
Power supply interface| 5V 1A
Battery| Built in battery

Trouble Shooting

Under normal operating conditions, the product problems, please refer to the solutions:

1. Can’t take photos and record:

   • Check the TF card to ensure it has enough space and is not locked.
   • It may automatically stop due to the large high-definition video data. Please use a high-speed TF card, which will have a 4 or C6 logo.
   • If you see “file error” when trying to view pictures and videos, it may be due to an error in TF card data storage. You can resolve this by reformatting the TF card using the camera’s “format” function.

2. Foggy Image:

   • Check whether the lens is dirty or has fingerprints. Before shooting, use lens paper to wipe the lens.

3. Dark Image in Sky or Water Scenes:

   • In scenes with high contrast, the automatic exposure function of the camera may be affected. You can adjust this by changing the “EV” (Exposure Value) setting on the camera.

4. Color Issues in Cloudy or Indoor Lighting:

   • Ensure that the camera’s “white balance” function is set to “Automatic.”

5. Horizontal Stripes in the Interface Image:

   • This may be due to the “light source frequency.”
     Adjust the camera’s frequency setting to match the local power supply frequency, typically “50Hz” or “60Hz.”

6. Crash:

   • If the device crashes, press the reset button.

7. Important Notes:

   • Remove the lens protective film before using the camera.
   • Charge the camera before use.
   • Use a TF card reader to export camera data.

Please follow these solutions to resolve common issues with the product. If you continue to experience problems, please refer to the user manual or contact customer support for further assistance.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>