uleFone GQ3109 Armor Pad Lite User Manual

: May 15, 2024
: uleFone

Table of Contents

Device Layout
GETTING STARTED
Contained in the box
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

ARMOR PRO LITE
USER MANUAL

Device Layout

uleFone GQ3109 Armor Pad Lite - DeviceLayout

1. Power Key/Side Fingerprint Sensor
2. Customized Button
3. Front Camera
4. Receiver
5. Light Sensor/Proximity Sensor
6. LED Indicator Light
7. Speaker| 8. 3.5mm Headphone Jack
9. Type-C Charging Port
10. Flash
11. Rear Camera
12. NFC
13. uSmart Expansion Connector
14. Volume
---|---

GETTING STARTED

2.1Charging the battery
Connect the supplied USB cable to the Type-C connector of the tablet.
Con nect the cable to the adapter and the adapter to the mains.
The tablet begins to charge and the battery indicator is shown on the screen.
2.2 Long press the ON / OFF button to start.
WARNING:
Charge the battery fully during the first charge and prior to first use.

Contained in the box

uleFone GQ3109 Armor Pad Lite - BOX

CE Warning

Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDINGTO THE INSTRUCTIONS.
The product shall only be connected to a USB interface of version USB2.0.
Adapter shall be installed near the equipment and shall be easily accessible.
Operation temperature:-10~40C
The plug considered as disconnect device of adapter.
SAR: The device complies with RF specifications when the device used at 5mm from your body (SAR limit 2.0W/Kg), The device is in compliance with the requirements.

This information has to be presented in such a way that the user can readily understand it. Typically, this will necessitate translation into every local language (required by national consumer laws) of the markets where the equipment is intended to be sold. Illustrations, pictograms and using international abbreviations for country names may help reduce the need for translation.
Restrictions in the 5 GHz band:
According to Article 10 (10) of Directive 2014/53/EU, the packaging shows that this radio equipment will be subject to some restrictions when placed on the market in Belgium (BE), Bulgaria (BG), the Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain(ES), France (FR), Croatia (HR), Italy (IT), Cyprus (CY), Latvia (LV), Lithuania(LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (Sl).
The WLAN function for this device is restricted to indoor use only when operating in the 5150 to 5250 MHz frequency range.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
This Product meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is1.6 W/kg averaged over one gram of this Device GQ3019(FCC ID: 2AOWK-3109SH5) has been tested against this SAR limit. SAR information on this can be viewed on- line at http://www.fcc.gov/oet/ea/fccid/. Please use the device FCC ID number for search. This device was tested for typical operations Omm from the body. The device can be used in portable exposure conditions without restriction.

| AT| BE| BG| HR| CY| CZ| DK
---|---|---|---|---|---|---|---
EE| Fl| FR| DE| EL| HU| IE
IT| LV| LT| LU| MT| NL| PL
PT| RO| SK| SI| ES| SE| UK

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

All Rights Reserved
The information contained herein is subject to change without notice. The only warranties for Connect and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. Connect shall not be liable for technical or editorial errors omissions contained herein.

Shenzhen Gotron Electronic CO., LTD
Address: Floor 7, Building A, Block 1, Anhongji Tianyao Plaza,
Longhua District, Shenzhen City, Guangdong Province China
Service Center
Email: [email protected]