Homekicen Antique Shower Faucet Sets Complete Instruction Manual
- May 15, 2024
- Homekicen
Table of Contents
Instruction Manual
Antique Shower Fauct-Sets
Antique Shower Faucet Sets Complete
Please do not hesitate to contact us with your questions,concerns and/or
problems, were here to help.
Customer Support: homekicen@126.com
Installation Preview
Installation Step of Valve body
Accessory list
| NO. | Name | Qty. |
|---|---|---|
| 1 | Valve lxxiy | 1 |
| 2 | Faceplate | 1 |
| 3 | Handle | 1 |
| 4 | Diverter | 1 |
| 5 | Screw kit | 1 |
Recommended Mounting Dimensions
-
Installation reference size .nain body fixed size ( width 40mm ) . Knock 4pcs setscrews into holes;
Connect the pipes into the valve body; Put valve body in the hole and fix it by the screw. then connect the water supply hoses. -
Plug the water outlets after the valve body is installed.
-
Reoove the black cover plate. Install the handle and di verter. Provide water from water inlet. And then test the water pipes leaking or not as below:
1 )Test 3 min at normal temperatures and pressures when the ceramic cartridge is closed.
2)Test 3 min at normal temperatures and pressures when the ceramic cartridge is open.
Proceed to next step if no leaking after the testing. -
Reoove handle and diverter, put on cover plate after water test is ok
-
Backfill the wall in concrete, tile on concrete and then remove the black coverplate when available.
Installation Step of Faceplate
Feed the valve body with panel, handle and di verter, then use the alien key and screw to secure handle and di verter.
Installation Step of Handheld shower
- Apply Teflon tape to threaded tail of the shower bracket
- Attach the cover plate to shower bracket
- Screw the shower holder clockwise onto the hand-shower outlet.
- Place rubber washers in both ends of the here. Connect the shower hose to the supply elbow and shower head Note the ends of shower hose to 1:£ cormected correctly.
Installation Step of Shower head
Ceiling mount
- Set the decorative Cup on the shower arm. and roll the teflon tape on the thread.
- Tighten the shower arm clockwise on the water outlet hole of the shower arm. Then put the overhead shower on the shower arm.
Wall Mount
- Set the decorative Cup on the shower arm.
- Tighten the shower arm clockwise on the water outlet hole of the shower arm. Then put the overhead shower on the shower arm.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>