KIKETECH T65 4 In 1 Pet Grooming Kit User Manual

KIKETECH T65 4 In 1 Pet Grooming Kit

Package List

1. Clipper Body
2. Normal Blade
3. Narrow Blade
4. Detail Blade
5. Nail Grinder
6. Clipper Oil
7. 10mm Guide Comb for Normal Blade
8. 6mm Guide Comb for Normal Blade
9. 3mm Guide Comb for Normal Blade
10. 3mm Guide Comb for Narrow Blade
11. Clean Brush
12. Type-C Charging Cable

Normal Blade Unit
Suitable for trimming the body hair of pets. Use the guide comb to better control the length of body hair as you prefer. For beginners, the guide comb can help them achieve a smooth haircut without any trimming skills.

Narrow Blade Unit
The curved shape makes it easy to trim areas such as armpits, ears, claws, buttocks and the comers of the eyes and leg seams. Also be used with a normal cutter attachment to trim various personalized shapes.

Detail Blade Unit
Helps trim multiple body parts of small pets, such as the hair on tne claws, buttocks, and even comer. It can also be used with normal cutter attachment to refine various personalized shapes For beginners, the guide comb can help them achieve a smooth haircut without any trimming skills.

Nail Grinder Attachment
Grind vour pet’s nails smoothly to avoid scratching your family members and damaging furniture. use. Make sure the pet is ready then choose an appropriate-sized port. Carefully place the grinder onto the nail. Please use speed 1 to start wines using the grinder.

NOTE
if it is the first time your pet to used the pet clipper kit, please cut off the long part of its nails, do not grind it too deep. and let our pet gradually adapt to the grooming kit.

How to Attach & Remove Attachment

• Attach Cutter Attachment
  Align the cutter attachment A with slot B of the clipper body, and press it firmly until it clicks.

• Remove Cutter Attachment
  Pull the cutter attachment A out of the clipper body B in the opposite direction.

Remove Blade of Normal Attachment
Turn off the switch, and press the tooth part of the standard attachment with your tumour. and push it out in the direction indicated by the arrow to remove the blade. Please support the cutter blade with your hand to avoid falling damage.

Attach Blade of Normal Attachment
Align the connector A of the blade with slot B of the cutter attachment, and press the blade firmly until it clicks.

How to Clean & Maintain

• Use the cleaning brush to remove the remaining hair from the cutter blade.
• The normal attachment removes hair that get caught between the white moving and fixed blades.
• Press the handle of the blade holder in the direction of the arrow and use the brush to clean the hair chips between the gaps of the blades.

NOTE: Do not remove the spring on the cutter attachment, otherwise it may not be restored and be scrapped.
After each time use, be sure to clean the surface of the cutter attachment and the broken hair between the blade gap to avoid the sharpness of the blade. If you clean it with water, please dry it in time to avoid rusting of the spring. After each cleaning, please use lubricating oil for maintenance.

How to Shaving

Hold the body made up of the cutting tools, so that the blade’s flat surface loses to the trim parts, gently against the hair direction forward pushing machine, you slowly steadily push the trim parts, can the hair be cut off, if you want to shave very short or shave, may the tip stick on the skin, but with shaving knife bottom part with a certain slope, moved slowly forward.

INSTALLATION
Align the guide comb with the slot on the edge of the cutter attachment, and push it down into the slot until it clicks.

REMOVE
Holding the clipper head with both hands, press the guide comb with your thumb and push upward to remove it.

Warning

1. Use close supervision when the appliance is used by children and people with disabilities.
2. Do not operate the appliance if it is not working properly or is damaged, as this may cause injury.
3. Do not disassemble the appliance by yourself.
4. Do not charge at temperatures above 40°C or below 0°C, as this will reduce battery capacity and shorten its lifespan.
5. Please unplug the charger in time after the appliance is fully charged, otherwise it may shorten the life of the battery.
6. This product may a little heat up during use and charging, this is normal.
7. Clean the cutting head with water only, and keep the trimmer body away from wet areas.
8. The service life of the cutter head is related to the service frequency, hair quality and maintenance please replace the worn blade in time to avoid pulling the hair.

Other Notes

• Noise Gets Loud:
  (Charging-Cleaning-Oiling)
  Under normal circumstances, the noise of our product is less than 50 decibels. If the noise of the product exceeds these decibels, please charge the product and charge it fully. If the noise is still loud, please use the clean brush to carefully clean the trimmed hairs on the head of the blade, then oil the blade after cleaning. This will reduce the noise

• Product Cutting Slow down:
  (Charging, Cleaning, Oiling)
  Please fully charge the product and try to start again, if the speed has not changed, please clean the hair of the blade attachment, and then oil the blade. Stuck hair on the head of the cutter will make the product slow down, timely cleaning can extend the life of the product.

• Cutter Head Gets Hot:
  This is normal. During the use of the product, the blade will be in constant friction, our products use double blades (ceramic and stainless steel material), has avoided the direct heating of the situation. Drop oil before using the product to prevent the blade from heating and sticking.

• Can’t Install the Cutter Head:
  Turn on the body switch and let the motor rotate to another position. Just try a few more times and you will be successful.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>