Electric Spin Scrubber JY-6010 Cordless Cleaning Brush with Adjustable Extension Handle Instructions

Electric Spin Scrubber JY-6010 Cordless Cleaning Brush with Adjustable Extension Handle

Thank you

Thank you for your purchase Please read the instructions carefully before use and keep them for future reference

Switch panel function

Note: These are important, please read them carefully

• Please fully charge the battery before the first use, it is recommended to charge it for 3 hours
• Long press the switch button for 2 seconds, the machine will enter the high speed rotating mode, the working indicator light will be on steadily, displaying the current remaining battery power.
• When the machine is working, press the switch button again, the machine will enter the low-speed rotation mode.
• When the machine is working, long press the switch button for 2 seconds, the machine will stop working.
• When the power is too low, the bottom light of the switch panel flashes, indicating that the machine is about to shut down, please charge it in time before use
• In case of improper operation, heavy load or blocking, 5 lights will flash at the same time. If the wrong operation is not corrected in time, the machine will shut down automatically in 5 seconds
• When charging, the 5 indicator lights on the panel turn on in a cycle. When the cycle lights on, when several lights do not circulate, it indicates the proportion of the charge has been completed.

PRE-USE NOTE

• For the reason of reduce the shaking range during the use of the product, the connection of the latest batch of brush head has been made relatively tight. Therefore, we suggest that you can gently swing the brush head and use a relatively strong force to remove it vertically. Don’t worry that you will break it!
• To remove stubborn stains, please use it with detergent.
• This product doesn’t come with a power plug, You can connect the included USB cord to any power bank or phone charger.

How to extend the handle

There is a black plastic locking device on the middle pole, in the ON state, pull out the front telescopic pole completely~ and then rotate the locking device to OFF®, please tighten it to avoid loosening when using, and then rotate to install the tail pole®, so that the length of the cleaning brush reaches 47.3 inches.

PRODUCT STRUCTURE

1. Sponge brush
2. Round brush
3. Towel brush
4. Big brushes
5. Imitation wool brush
6. Fiber brush
7. Corner brush
8. small brush
9. Charging line
10. Telescopic rod
11. Connect head
12. main body
13. Switch button
14. control panel
15. Indicator light
16. sealing plug
    

WARNING

• Please check carefully the fittings before use.
• Do not place the charger in wet conditions.
• Be sure to check that the charging hole is sealed when cleaning.
• Dry the surface in time after cleaning to ensure the product is dry.
• This product must not be used by persons (including children) who are not sound, feel or mentally handicapped or lack relevant experience and knowledge, unless there are persons responsible for their safety who supervise or direct their use of the product. Children should be taken care of to ensure that they do not play with these products.
• Do not use hot water when cleaning products. When using warm water, check that the temperature is too high to prevent scalding.
• Please make sure to use the standard charger for this product.
• Do not touch the rotating parts with your hands or skirts when using.

HOW TO CHARGE

• When the power of the machine is low, the fifth light on the control panel starts flashing.
• Open the sealing plug of the charging port, insert the charging plug into the charging hole using the charging cable matched with the product, and the indicator light on the switch panel flashes alternately.
• The charging time of the product is about 2-3 hours.
• When all the indicator lights are on, it means that the power is sufficient. Pull out the charger and install the sealing plug

Warning: when charging, be sure to use the original charging cable with the USB charger of dv5v1 a, and check whether the charger and charging cable are wet

PURPOSE OF ACCESSORIES

• Sharp brush: Suitable for the corners, seams, car wheels of a home kitchen, bathroom or fume.machine, as well as for cleaning areas that are not easily accessible (Fig 4)
• Small flat brush head: suitable for cleaning small flat areas such as hand wash basin, kitchen sink, furniture etc .(Fig .5)
• Big flat brush head: Suitable for cleaning oil and dirt in bathroom, kitchen, living room, toilet, window, glass etc (Fig6)
• Towel brush: mainly suitable for living room floor, glass, tea table, car surface cleaning, polishing and other purposes (Fig7)
  
  

Note: when using 7-9 brush disc, it needs to be used together with brush disc base.

• Imitation wool brush plate is mainly used for polishing, waxing or decontamination of high-grade household, electrical appliances and automobile surfaces
• Fiber brush tray is mainly used in kitchen, stove, range hood and other places that are particularly difficult to clear
  
  

HOW TO USE

• Please fully charge the battery before use.
• Install the appropriate brush head on the host according to the requirements of the place to use.
• Long press the switch butto1n for 2 seconds for High speed and once for Lows peed. (Fig 11)
• During operation, the number of indicator lights on represents the current proportion of remaining power.
• After cleaning, shut down the machine in time, continue to replace the brush head, or clean the product and place the brush head properly.

HOW TO REPLACE THE BRUSH HEAD

• When replacing the brush head, the product should be closed and the fingers should be away from the switch key
• Hold the brush head and pull it out vertically. When pulling the brush head, you can gently swing the brush head while pulling, so it is easier to pull it out.(Fig12)
• installing the brush head, align the semicircular groove of the brush head with the convex groove of the brush head connector and mount it vertically.(Fig 13)
• When using the mop, press the white side of the mop towards the bottom of the mop tray to start it
  

CLEANING AND MAINTENANCE

• Please check if the charge is sealed when cleaning.
• Do not use metal such as steel wire or abrasive cleaner or corrosive liquid (e.g. gasoline or acetone) to clean brush heads and fuselage surfaces.
• You can wash the product under the tap or drive the product to high-end, and automatically clean the brush into the water.
• After the cleaning is finished, it is necessary to shake the moisture on the dry product and wipe it with dry cloth.

ENVIRONMENT PROTECTION

• Do not use more than 60° of hot water to clean the brush head and products.
• When disposing of products, please do not pile them up with general domestic waste; they should be handed over to the manufacturer’s designated recycling centre. This is good for environmental protection.
• Built-in rechargeable batteries contain substances that may contaminate the environment. When products are discarded, make sure the battery is removed and properly handled

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>