EasierHike YTS-4L Beach Sunshade Installation Guide
- May 15, 2024
- EasierHike
Table of Contents
EasierHike YTS-4L Beach Sunshade Installation Guide
Installation Guide
NOTE: Scan this QR code to watch the installation video
Customer Support:Support@easierhike.com
-
Lay out the tent and spread it on the beach with the logo facing up.
-
Fill 4 sand bags as much as possible.
NOTE: At least 10 full shovels of sand into each sand bag
-
Fully stretch the tent to an X shape by moving 4 sand bags.
-
Slot up each section to form a long pole.
Note: The bungee cord tie on the poles will be used shortly to fix tent and poles
-
Please use the ball head of the pole to prop the tent in the yellow area at 4 corners.
-
Fix the tent and pole with bungee cord.
-
Clip the windproof cord to bungee cord and hook the other end to the sand bag.
-
Fully stretch the tent again and dig 4 deep pits to bury 4 sand bags to prevent them from moving.
-
Re-adjust the poles and insert them deeply into the sand.
-
Install the side shade to the adjacent 2 poles.
Done!
You can adjust the side shade to the angle of sunlight to create the best shade possible.
Customer Support:Support@easierhike.com