HARBOUR HBRCI604C 60cm Induction Cooktop User Guide
- June 4, 2024
- HARBOUR
Table of Contents
HARBOUR HBRCI604C 60cm Induction Cooktop
Control Panel
- ON/Off control
- Timer
- Power boost
- Zone selection control.
- Power and Timer regulating controls
- Child lock
Starting Up Your Induction Cooktop
-
Touch the ON/OFF power control for three seconds. After the power is on, the buzzer will beep once and all the displays show either “” or “” indicating the cooktop has entered standby mode.
-
Place a suitable pan on the cooking zone that you wish to use. Make sure the bottom of the pan and the surface of the cooking zone are clean and dry.
-
When selecting the heating zone of your choice, the indicated next to the button will flash.
-
Select a heat setting by touching the
’ or+’ buttons. If you don’t choose a heat setting within 1 minute, the induction cooktop will automatically switch off. You will need to start again at step 1. You can modify the heat setting at any time during cooking.
How Does Induction Cooking Work?
Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by electromagnetic vibrations generating heat directly in the pan, rather than indirectly through heating the glass surface. The glass becomes hot only because the pan eventually warms it up. NOTE: Only use cookware with a base suitable for Induction Cooking. This is usually indicated on the packaging or on the bottom of the pan.
TIPS FOR USING & OPERATING YOUR COOKTOP (HBRCI604C) SUPPORT: 1300 11 4357 | WWW.HARBOUR-APPLIANCES.COM.AU