BASON E124B LED Bluetooth Controller Instruction Manual

Installation light

Manufacturer: Shenzhen Bason Electronics Technology Co., Ltd
Address: Floor 5. B Building, Hui Longda Industrial Park. No.2 of Shi Long Community. Shiyan Town, Baoan District Shenzhen, Guangdong, China This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body

Installation

1. Clean the installation site, keep it clean and dry.
   Reinigen Sie den Aufstellungsort, batten Sie ihn sauber und trocken.

|

1. Install the buckle at the corner. Installieren Sie die Schnalle an der Ecl

1. Install the light bar and snap it into buckle after 10 minutes. Installieren Sie die Lichtleiste und lassen Sie sie nach 10 Minuten einrasten.

|

1. The corner position can be bent and cannot be folded. Die Eckposition kann gebogen und nicht gefattet warden.

1. After the installation, connect the USB port. SchlieBen Sie nach der Installation den USB-Anschluss an.

| Control the light strip with a smartphone app or remote control. Steuem Sie den Lichtstreifen mit eine’ Smartphone-App oder einer Fernbedienung.

Product List:

1. LED strip
2. Remote control (Cr2025 battery inserted)
3. la USB Power line
4. Cable Buckle x 4

Product Parameter:

REMOTE CONTROL

1. LED brightness adjustment buttons (8 levels of brightness)
2. On/Off buttons.
3. LED color buttons (16 colors)
4. Flash: Fast change LED colors in every 0.5 seconds.
5. Strobe: Fast change LED colors in every 3 seconds.
6. Fade: Fade out the current LED color and fade into the next LED color every 0.5 seconds.
7. Smooth: Fade out the current LED color and fade into the next LED color in every 3 seconds

Instructions

APP installation instructions:

Search “HomePlus Light” in APP Store or Google Play Store.
Disclaimer
Please read through this user manual thoroughly and make sure you follow the instruction to use the product properly and safely. If the product damage is caused by misuse by the user which may result in product damage, the supplier is not responsible for the damage even when the product is within its warranty period.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject. to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body

1. Please keep the product away from the flammable object, explosive gas, and liquid.
2. Ensure that the cables and pins are connected correctly and properly to avoid hazards and damage caused by a short circuit.
3. Before connecting the product to the power source, please make sure that the power voltage of the power source is 5V.
4. Please do not connect the product to the power source before the installation of the product is completed.
5. Please ensure the remote control sensor on the main LED strip is not covered or blocked in order to make sure that the remote control will work properly.
6. Please do not try to repair the product.
7. Never cut the LED strip.
8. Do not use the rope light when covered or recessed into a surface
9. The light source of this luminaire is not replaceable; when the light source reaches its end of the whole luminaire shall be replaced.
10. Then luminaires shall be supplied by an independent SELV LED driver which was approved according to standard EN 61347-2-13, and
    – the output voltage, output current, and output power shall comply with the luminaire’s ratings;
    – the IP degree of the LED driver shall be the same as the luminaires at least.

Troubleshooting

remote control to turn off
Strip flashing| TV USB has some problems| Use the USB plug to supply power

Disposal

** The packaging material is recyclable. Dispose of the packaging in an environmentally-friendly manner and make it available to the collection service for recyclable materials.
Dispose of the product in an environmentally friendly manner The product does not belong in the household garbage. Dispose of it at a recycling center for old electric and electronic equipment. For more information, please contact the administration in your community.
Batteries and rechargeable batteries must be removed and disposed of separately before disposing of the product. To protect the environment, batteries and rechargeable batteries may not be disposed of together with normal household waste. Instead, they must be turned in at appropriate collection points. Please also observe applicable statutory provisions regulating the disposal of batteries.
Service Procedure
If you have any problem or get a defective product, we will reply within 24 hours. Email:peter-service@outlook.com
You can:**

1. Return it back without any reason within 30 days after receipt of goods.
2. Get a refund or replacement without shipping rate within 30 days.
3. Get free replacement parts (need to cover shipping rate) within 365 days.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>