ODIKA ET-CS-GY-81822 C Shaped End Table Installation Guide
- May 15, 2024
- ODIKA
Table of Contents
ODIKA ET-CS-GY-81822 C Shaped End Table
Product Specifications
- Product Name: End Table
- Design: Simple and elegant
- Assembly Req u ired: Yes
- Tools Needed: Included in the package
- Materials: Wood and metal
- Dimensions: 24 inches (L) x 18 inches (W) x 22 inches (H)
- Weight: 15 lbs
Product Usage Instructions
-
Step 1: Unboxing
Open the package carefully and lay out all the parts on a clean, flat surface. -
Step 2: Identify Parts
Refer to the manual to identify each part by its corresponding number. -
Step 3: Assembly
-
Start by attaching part 1 to part 2 using screws A (M6*12mm).
-
Connect part 3 to part 4 and part 5 using screws B (M5*50mm).
-
Attach part 6 to part 7 with screws C.
-
Secure part G to part S4 and S3 using screws D.
-
Continue assembling the remaining parts following the numerical order indicated in the manual.
Frequently Asked Questions (FAQ)
-
Q: Are additional tools required for assembly?
No, all necessary tools are included in the package for your convenience. -
Q: What is the weight capacity of the end table?
The end table is designed to support up to 20 lbs of weight.
End Table
Perfectly designed with simplicity in mind 
- If you have these tools at home to assist you, assembly will be quicker.
- If not, no worries, we have included everything required for assembly in the package.
TOOLS
INSTALLATION STEP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>