HIKER H10 360 Degree Mobile Holder User Guide
- May 15, 2024
- Hiker
Table of Contents
Model : H10
360° Magnetic Mobile Holder
User Guide
H10 360 Degree Mobile Holder
Clean the device surface before use..
Wipe your phone’s back surface with a wet wipe. Ensure that the back side
is thoroughly clean & dry. Chose one out of the two sizes (Round & Square)
available for the metal sheets & white stickers according to the size of your
phone.
Peel off the White Sticker !.
Peel off the white film of the selected size & stick it down firmly to the center
of the back of your phone or phone cover.
This white sticker will protect your phone surface from any scratches by the
metal plate.
Take the Black Metal Plate
The black plate is the metal element which will hold your phone to the magnetic mount. Thus, chose the metal plate according to the surface are of your phone or phone cover. Square plate is recommended for bigger devices.
Apply the Metal Plate
Peel off the white 3M sticker from the back of the metal sheet and press it down firmly to the center of the whitesticker on the back of your phone or cover.
Incase, bottom 3M adhesive does not work, Use the extra 3M adhesive stickers given in the box. Follow the same instructions as previous or contact us.
Clean the Dashboard..
Clean the dashboard surface where you want to fix the HIKER mount. Use the alcohol swab to wipe off any dust, oils or dirt particles from the dashboard surface. Ensure that the surface is thoroughly clean & dry before proceeding with the HIKER mount installation.
Fix the HIKER Mount !.
Once the desired area is clean & completely dry, peel off the 3M sticker on the
back of the HIKER Mount and firmly press it onto the dashboard surface.
Keep pressure on the mount for 2-3 minutes.
Shh.. Wait for sometime!
After installation of the HIKER mount please wait 24 hours before usage so
that the adhesive can firm up/stick properly.
Using it too early may cause the adhesive to fail.
Ready to Use !
After 24 hours, your HIKER magnetic mount is ready for use. Tap off your phone on the top of the holder and let the HIKER magnetic mount do the rest.
