HIKER AUDIO K1 ANC Active Noise Cancelling Bluetooth Headphone User Manual
- June 6, 2024
- HIKER AUDIO
Table of Contents
HIKER AUDIO K1 ANC Active Noise Cancelling Bluetooth Headphone
Preview
Welcome to use Kl ANC BT Headsets.wish you to experience the wonderful music journey!
- K1 ANC Active noise <ancelling BT Headsets c;an be ,onnected to mob·11e phones, computers and other BT devices.
- Foldable design.easy and convenient.easy to travel.walk around.
- It is ergonomically designed to give you comfort.stability and pure sound.
- Built-in wireless microphone,ANC active noise cancelling.and bring you a perfect listening experi@nce.
- Slim is compatible with all 3.5mm audio devices.it can a lso be used as a high quality playback headset without power-on.
- Fully enclosed cavity design,new large diameter40mm neodymium iron strong magnetic unit ,n~ tuning,r~p~aited r:heck.
- The sound quality is excellent.with rich low frequencies, bright treble~ excellent parsing.
- 10M effective distance, 18 hours long time to play,allows you to listen to good music for a long time
Active noise cancelling function
In the noisy environment,turn on the ANC swit ch.it can effectively reduce 85%
of the ambient noise.to provide you with quiet and comfortable can enjoy high-
quality music environment.
Headset conf1gurat1on
Match Your Device
How to pair your phone:
- Make su~ the bluetooth headc;et has enough battery power before pairing the device.
- Charging: Connect the Mirco plug t o the charging interface.The indicator light shows that the red is charging.when the bat tery is full.the indicator light disappears. ” Red light flashing. voice prompt~ occurs when the battery is low,lt takes about 2 hours for t he battery to be fully charged
- Turn on the headset: Turn on the button,and the indicator light flashes alternately blue and red to enter the pairing state.
- Headphone search: Keep the distance between the bluetooth headset and the mobile phone within 1 meter,turn on the bluetooth of the mobile phone and start searching for pairs.
- Bluetooth Pairing: When HIKER AUDIO Kl ANC is displayed on the mobile phone, click connect.At this time,the headphone indicator is blue blinking.and the headphone has been paired with the device successfully.
- After disconnecting from the connected device,if you turn on bluetooth again,it will auto matically connect to the last paired device
Use the Headset
Check Guide Parameters
Faults and Solutions
**
**
Technical indicator
Notice
- Keep away from moisture Do not expose headsets to rain or humid alr,and do no t d ry the device with a hair dryer or microwave oven.
- Battery Safety The device contains a buHt-in battery,when using the battery,do not heat_ puncture, destroy the product or put the product into fire.Do not expose headsets to direct sunlight for long periods of t ime.which m.iy cause melt ing or b.ittery d.image.
- Wired Safety Avo id damaging power cables and 3.55mm AUX cable,and prevent people from stepping on them, squeezing them or serio usly bending them,especially at the connections between power cables and devices.Do not knot the power cord,yank itor use it roughly.Keep the cord away from children and pets.Do not let them bite or chew the cord. Do not expose, the power cable to a heat source,when disconnection the power cable,hold the plug and pull it o ut,Do not pull the power cable out.
- Hearing Safe1ySet the volume to clearly audible,Don’ t raise the volume again.Your ear h.is the ability to adapt over time so that high volume soun ds like normal volume,but high volume can st ill damage your hearing.
- Dispose of discarded batteries and electrical and electronic equipment The product or battery C.3n not be discarded with the ho usehold garbage.At the same time,you are obligated to send it to the appropriate collection point so that the batteries and e-lectrical equipme-nt can be- recycled.Because of the pote-ntial presenceof hazardou~ substances in batteries and elec:t rical equipment,classified colledion and recycling help to protect natural resources and prevent potential negat I’ve consequences for hum;m health and the environment due to improper handling.
Headset Size
Name and content of harmful substances in the product
This form is prepared in accordance with SJ/T 11364
- o : Indicates that the content of the hazardous substance in all homogeneous nmmaterials of the part is below the limit requirement stipulated in GB/T 26572
- x: Indicate,; that the content of the haz.1rdous substance in at least one homogeneous material of the part exceeds the limit specif ied in GB/f 26572. And t here is no mature alternative in the industry ta meet the environmental requirements of the EU ROHS d irective.
FCC Warning:
This equipment has been testedand found to complywiththe limitsforaClassB
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonableprotection against harmfulinterference in a
residential installation. This equipment generates,uses and can radiateradio
frequency energy and, if not installedand used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interferencewill not occurin a
particularinstallation, If this equipment does cause harmful interference to
radioor television reception, which can be determined by turning the equipment
off and on , the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receivingantenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on acircuit different from that to which the receiver is connected.
- Consultthe dealeror an experiencedradio/ TV technician for help.
This device complieswith part 15 of the FCC Rules. Operationis subject tothe following two conditions:
- This devicemay not cause harmful interference,and
- This device must accept any interference received, including interference that may cause undesired operation Changes or modifications not expresslyapproved by the party responsible for compliance could void the user’s authorityto operate the equipment.
FCC RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>