HIKER F10 Mini Magnetic Holder User Guide

HIKER F10 Mini Magnetic Holder

Specifications

• Product Name: 0LQL0DJQHWLF+ROGHU 8VHU*XLGH
• Model: 0RGHO)
• Power Source: &OHDQWKHGHYLFHVXUIDFH
• Material: &OHDQWKH’DVKERDUG

Product Usage Instructions

Powering On the Device

• To power the device, press the %ODFN0HWDO3ODWH button located on the front panel.

Setting Up the Device

• Connect the device to a power source using the supplied power cord. Ensure the %ODFNSODWHLVWKHPHWDOHOHPHQW is securely connected.

Adjusting Settings

• Use the +,(.50RXQW knob to adjust the settings according to your preference.

Using Different Modes

• Switch between modes by pressing the %ODFN0HWDO3ODWH button multiple times until the desired mode is selected.

Maintenance

• Regularly clean the device using a soft cloth to prevent dust accumulation and ensure optimal performance.

FAQs (Frequently Asked Questions)

Q: How do I reset the device?

• A: To reset the device, locate the reset button on the back panel and press it with a small object like a paper clip.

Q: What should I do if the device malfunctions?

• A: If you encounter any issues or malfunctions, refer to the user manual for troubleshooting steps or contact customer support for assistance.

INSTALLATION INSTRUCTION

• Clean the device surface before use.
  • Wipe your phone’s back surface with a wet wipe. Ensure that the back side is thoroughly clean & dry.
  • Choose one out of the two sizes (Round & Square) available for the metal sheets & white stickers according to the size of your phone.
• Peel off the White Sticker!
  • Peel off the white film of the selected size & stick it down firmly to the center of the back of your phone or phone cover.
  • This white sticker will protect your phone’s surface from any scratches by the metal plate.
• Take the Black Metal Plate
  • The black plate is the metal element that will hold your phone to the magnetic mount.
  • Thus, choose the metal plate according to the surface of your phone or phone cover.
  • A square plate is recommended for bigger devices.
• Apply the Metal Plate
  • Peel off the white 3M sticker from the back of the metal sheet and press it down firmly to the center of the white sticker on the back of your phone or cover.
• Clean the Dashboard.
  • Clean the dashboard surface where you want to fix the HIKER mount. Use the alcohol swab to wipe off any dust, oils, or dirt particles from the dashboard surface.
  • Ensure that the surface is thoroughly clean & dry before proceeding with the HIKER mount installation.
• Fix the HIKER Mount!
  • Once the desired area is clean & completely dry, peel off the 3M sticker on the back of the HIKER
  • Mount and firmly press it onto the dashboard surface.
  • Keep pressure on the mount for 2-3 minutes.
• Shh.. Wait for some time!
  • After installation of the HIKER mount please wait 24 hours before usage so that the adhesive can firm up/stick properly Using it too early may cause the adhesive to fail.
• Ready to Use!
  • After 24 hours, your HIKER magnetic mount is ready for use.
  • Tap off your phone on the top of the holder and let the HIKER magnetic mount do the rest.

Other Uses

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>