BRAYER BR4976 Fan Instruction Manual

: May 15, 2024
: BRAYER

Table of Contents

BRAYER BR4976 Fan
Product Information
DESCRIPTION
SAFETY MEASURES AND OPERATION RECOMMENDATIONS
BEFORE THE FIRST USE
REMOTE CONTROL
FAN USAGE
CLEANING AND MAINTENANCE
DELIVERY SET
TECHNICAL SPECIFICATIONS
RECYCLING
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRAYER BR4976 Fan

BRAYER-BR4976-Fan-product

Product Information

Specifications

Model: BR4976
Intended Use: Artificial ventilation of the room
Power Source: Lithium battery (remote control)
Usage: Household use only
Operating Life: 3 years

FAQ

Q: How often should I clean the Air-Inlet Grill and Outgoing Airflow Grill?
- A: It is recommended to clean the grills regularly, depending on usage, to ensure efficient airflow.
Q: Can I use the fan for commercial purposes?
- A: No, the fan is intended for household use only and should not be used for commercial or laboratory purposes.

The fan is intended for artificial ventilation of the room.

DESCRIPTION

BRAYER-BR4976-Fan-fig-1

Base
Outgoing Airflow Grill
Indication Panel
Control Panel
Carrying handle
Body
- Control Panel
On/Off timer button «TIMER»
Body oscillation On/Off button «OSC»
Airflow type selection button «AIRFLOW»
Airflow speed selection button «SPEED»
On/Off power button «ON/OFF»
- Indication panel
Digital display: room air temperature/timer operation time
Room temperature display «ºС»
Timer value display «Н»
Normal mode indication « »
Night mode indication « »
Fan oscillation indication « »
Timer On/Off indication « »
Economy mode indication « »
Airflow speed indication
- Remote control
Remote control
Fan «ON/OFF» power button
Аirflow rate selection button «SPEED»
Airflow type selection button «BLOW»
Oscillation mode on/off button «OSC»
Battery Holder
Mode power button «SILENT BLOW»
Timer on/off button «TIMER»

SAFETY MEASURES AND OPERATION RECOMMENDATIONS

Read the operation manual carefully before using the fan; after reading, keep it for future reference.

Use the unit for its intended purpose only, as it is stated in this manual.
Mishandling the unit can lead to its breakage and cause harm to the user or damage to the user’s property, which is not covered by warranty.

ATTENTION: A lithium battery is used in the remote control. To avoid danger, do not allow children to play with the battery. If your child swallowed a battery, immediately see your doctor.

Make sure that the operating voltage of the unit indicated on the label corresponds to your home mains voltage.
Place the fan vertically on a flat dry moisture- and heat-resistant surface, do not place it horizontally and do not turn it over.
Do not place the fan on soft surfaces, such as carpets with high pile, sofas or beds.
Do not place the fan near curtains and do not direct it to house plants.
Do not use the fan in a limited space, for example, in built-in cabinets or wall niches.
It is not recommended to stay in the zone of the air flow from the fan for a long period of time, especially for children and the elderly.
Do not use the power cord as a carrying handle for the fan.
Do not wind the power cord around the fan body.
Provide that the power cord does not contact with hot surfaces and sharp furniture edges.
Protect the unit from impacts, falling, vibrations and other mechanical stress.
Avoid blocking the air inlet grid of the fan with foreign objects, do not cover the unit during the operation.
Do not use the unit in places where inflammable liquids are used or aerosols are sprayed, do not use the unit in the places where such liquids are stored.
Do not use the unit near heating appliances, heat sources or open flame.
Do not use the unit outdoors, in bathrooms or in places with high humidity.
Do not use the unit in proximity to the kitchen sink, near swimming pools or other containers filled with water.
If the unit is dropped into water, unplug it immediately, and only then you can take the unit out of water. Apply to the authorized service center for testing or repairing the unit.
Do not touch the unit body, the power cord and the power plug with wet hands.
It is not recommended to use the unit during lightning storms.
Do not block the fan grids and do not insert foreign objects onto them.
Never leave the unit connected to the mains unattended.
Unplug the unit after usage or before cleaning.
Switch the fan off and unplug the power cord plug from the mains socket.
When unplugging the unit, hold the power plug and carefully remove it from the mains socket, do not pull the power cord, as this can lead to its damage or cause a short circuit.
Do not immerse the unit into water or any other liquids.
If water droplets fall on the fan body, switch it off and disconnect the power plug from the mains before touching the unit, then wipe the fan body with a dry cloth.
For child safety reasons do not leave polyethylene bags used as packaging unattended.

ATTENTION! Do not allow children to play with polyethylene bags or packaging film. Danger of suffocation!

The unit is not intended for usage by children.
Do not leave children unattended to prevent them using the device as a toy.
Do not allow children to touch the operating surface, the unit body, the power cord or the power plug during operation of the unit.
Be especially careful if children or disabled persons are near the operating unit.
During the unit operation and breaks between operation cycles, place the unit out of reach of children.
The device is not intended to be used by people (including children) with physical, sensory, psychological, or mental disabilities, or lacking experience or knowledge, if they are not under the supervision of or have not been instructed on the usage of the device by the person responsible for their safety.
From time to time check the power cord integrity.
If the power cord is damaged, it should be replaced by the manufacturer, a maintenance service or similar qualified personnel to avoid danger.
Do not repair the unit by yourself. Do not disassemble the unit by yourself, if any malfunction is detected, and after the unit was dropped, unplug it and apply to the service center.
To avoid damages, transport the unit in the original package.
Keep the unit in a dry cool place out of reach of children and disabled persons.

THE UNIT IS INTENDED FOR HOUSEHOLD USE ONLY, DO NOT USE THE UNIT FOR COMMERCIAL OR LABORATORY PURPOSES.

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative temperature, unpack it and wait for at least 3 hours before using it.

Unpack the unit and remove all the packaging materials.
Keep the original package.
Read the safety measures and operating recommendations.
Check the delivery set.
Examine the unit for damages, in case of damage do not plug it into the mains.
Make sure that specified specifications of power supply voltage of the unit correspond to the specifications of your mains. No additional settings required when using the device in the mains with 60 Hz frequency.
Wipe the fan body with a slightly damp cloth and then wipe it dry.

FAN ASSEMBLY

Fan is supplied with its Base (1) disassembled. Do not turn on the fan without the Base (1).
Align the protrusions on the bottom part of the fan body with the openings on the base (1) (Fig. 2).
Secure the base, using the provided set of fasteners (Fig. 3).
Gently insert the power cord into the holder on the base (1) (Fig. 4).

REMOTE CONTROL

ATTENTION

A lithium battery is used in the remote control.
To avoid danger, do not allow children to play with the battery. If your child has swallowed a battery, immediately see a doctor.

Battery installation/replacing

Press on the clamp and remove the battery holder (26) from the remote control (21) body, insert a CR2025 battery (are not included) into the holder, strictly following the polarity (pic. 5).
Install the battery holder (26) into the remote control (21).
- Notes: if there is an isolation insert in the battery holder (26), remove the insert;
- replace the battery in time;
- do not recharge the lithium battery CR2025;
- remove the battery if you are not planning to use the unit for a long time;
- remove the used battery from the remote control (21) and dispose of it.
When using the remote control, aim it at the front upper part of the fan body (6).
The distance between the remote control and the fan should not exceed 5 m, the coverage angle should be up to 30 degrees.
Avoid exposing the receiver to direct sunlight, otherwise false activation of control commands is possible.
When you are not using the remote control (21), insert it into the carrying handle (5) on the fan.

FAN USAGE

Place the fan Base (1) on a flat, dry and steady surface.
Do not place the fan on soft surfaces, such as carpets with high pile, sofas, or beds.
Insert the plug of the power cord into an electric socket, while room air temperature will be displayed with numeric symbols (12) on the indication panel (3), and symbol (13) «ºС» will light up.

Note

numeric temperature readings may slightly differ from readings of other thermometers.

Switching the fan on/off and selecting the airflow speed

To turn on the fan, press the «ON/OFF» Power Button (11) on the Control Panel (4) or the «ON/OFF» button (22) on the Remote Control (21) – the fan will turn on.
To turn off the fan, press the «ON/OFF» Power Button (11) on the Control Panel (4) or the «ON/OFF» button (22) on the Remote Control (21) a second time – the fan will turn off.
Press the «SPEED» (10) on the Control Panel (4) or the «SPEED» buttons (21) on the Remote Control (23), you can select the mode of airflow to be displayed on the Indication Panel (3) through the indicators (20).
You can select one of the 6 airflow speed options.

Selecting the airflow type

Press the «BLOW» button (9) on the Control Panel (4) or the «BLOW» button (24) on the Remote Control (21), select the airflow type.
The airflow type is displayed through the indicators (15, 16, 19) on the Indication Panel (3):
- (15) « » – normal mode – normal air ventilation;
- (16) « » – «Night Mode» (16), you can choose one of 6 airflow speed options. In this mode, the airflow speed will gradually decrease from the current setting every twenty minutes until it reaches the lowest airflow speed level.

Note

to turn on the «night mode» by the remote control (21), press the button (27) «NIGHT MODE», and the indicator (16) « » will light up on the indication panel (3). To turn off the «night mode», press the button (27) «NIGHT MODE» on the remote control (21) again, and the indicator (16) « » will go out.
When you turn on the «night mode», the indication panel (3) will go out after 8 seconds. Press any button to turn on the indication panel (3).
(19) « » – Economy mode, the airflow speed adapts to the temperature of the environment.

Fan operation time timer

To set the fan operation time, press the «TIMER» button (7) on the Control Panel (4) or the «TIMER» button (28) on the Remote Control (21); the « » indicator (16) on the Indication Panel (3) will turn on.
Set the timer duration between 1 and 15 hours with a 1-hour increment. The set time will be displayed on the indication panel (3) with digital characters (12) and the symbol (14) «H»
To turn off the timer, press the on/off power button (11) «ON/OFF» on the control panel (4) or the button (22) «ON/OFF» on the remote control (21). The fan will turn off. To turn on the fan, press the button (11 or 22) again.

Note

In the timer mode, the indication panel (3) will go out after 10 seconds. Press any button to turn on the indication panel (3).

Switching the fan body oscillation on/off

To activate the oscillation mode, press the body oscillation On/Off button (8) «OSC» on the control panel (4) or the button (25) «OSC» on the remote control (21).
The « » indicator (17) will turn on. To deactivate the oscillation mode, press the body oscillation On/Off button (8) «OSC» on the control panel (4) or the button (25) «OSC» on the remote control (21) again.
Once you are finished, turn off the fan by pressing the «ON/OFF» Power Button (11) on the Control Panel (4) or the «ON/OFF» button (22) on the Remote Control (21), unplug the power cord from the mains socket.
Insert the remote control (21) into the carrying handle (5) of the fan for easy storage.

CLEANING AND MAINTENANCE

Before cleaning the fan, switch it off and unplug it.
Wipe the fan body with a slightly damp cloth and then wipe it dry.
Do not use liquid detergents, abrasive cleaners and any solvents to clean the fan.
To avoid the risk of electric shock provide that no water or other liquid gets into the fan body.
You can use a vacuum cleaner with an appropriate attachment to clean the Air-Inlet Grill and the Outgoing Airflow Grill (2).

STORAGE

After cleaning put the fan away for storage in a dry cool place away from children and disabled persons.
Remove the battery from the remote control (21) if it will not be used for a long time.
Before using the fan next time, it is recommended to check the unit operability and integrity of the power cord isolation and the power cord plug.

DELIVERY SET

Fan — 1 pc.
Base – 1pc.
Remote control – 1
Base fasteners – 1 set
Instruction manual — 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V, ~ 50/60 Hz
Rated input power: 75 W
Remote control

RECYCLING

To prevent possible damage to the environment or harm to the health of people by uncontrolled waste disposal, after service life expiration of the unit or the batteries (if included), do not discard them with usual household waste, deliver the unit and the batteries to specialized centers for further recycling.

The waste generated during the disposal of the unit is subject to mandatory collection and consequent disposal in the prescribed manner. For further information about recycling of this product apply to a local municipal administration, a disposal service or to the shop where you purchased this product.

The manufacturer reserves the right to change the appearance, design and specifications not affecting general operation principles of the unit, without prior notice.