ZHUOPAI T3 Instrument Panel User Guide

Instrument Panel
User Guide
Model: T3

Navigation Bar Function Guide

Touch the LCD Panel right corner will display the navigation bar, select each icon will enter into each interface. The Navigation bar auto-hidden after 5 Seconds if there is no touch

Instruments UI Instruction

2.1 Day Mood & Night Mood
Day Mood

Night Mood

In system settings, if choose Auto, it will auto switch with Tesla large display
2.2 Slide Window

2.3 Volume Adjustment of the Instrument Panel Amplifier
Slide up/down on the left edge of the panel changes the volume of the panel’s internal amplifier. If the panel Bluetooth is connected to the vehicle’s original Bluetooth then the amplifier will automatically shut down.

2.4 Screen Brightness Adjustment
Settings -> Screen Brightness -> Manual, Slide up/down on the right side of the panel changes the brightness. Sets daytime/nighttime mode. Independent settings of brightness. Settings -> Screen Brightness -> Auto, Instrument panel brightness automatically synchronizes with the vehicle’s central dashboard.

Slide Windows Display:

1. Lamp Model Info,
2. Safe Distance Info,
3. Door info,
4. Tire Pressure Info

• Lamp Model Info
  Headlamp, Break lamp Synchronous display

• Safe Distance Info
  Displays the safety distance value set by the current original vehicle

• Door Info
  Display 5 Doors switch status

• Tire Pressure Info
  The tire pressure values of four tires of the original vehicle are displayed, and the tire pressure units can be switched by touching the unit icon during normal driving, if there is a door unclosed or a tire pressure alarm, the interface will automatically jump to the corresponding alarm interface, and lock the up and down sliding function until the alarm is released, and will automatically jump back to the lamp vehicle model interface.

2.5 Mileage Information Description

The single mileage, total mileage, and remaining mileage information are displayed under the power instrument. The display unit follows the original vehicle.
Single Mileage: The single trip mileage is accumulated from zero clearing.
Touch the mileage value to clear the single-trip mileage.
Total Mileage: Follow the original car
Remaining Mileage: Follow the original car

Smart Phone Screen Projection UI

The screen projection interface can be displayed in full screen or normally, default is normal. If you need to change, you can go to the connection mode column of the setting interface to modify the mobile phone projection display. Fixed normal display in CarLife mode. Some instrument information will be displayed synchronously on the right side of the normal display.

System Settings

4.1 System Settings

Supported Car Model: Support TESLA Model 3 & Model Y
Temperature unit: Set the temperature unit, Celsius (°C)/ Fahrenheit (°F).
Mobile Connectivity: Support Wireless CarPlay, Wired/Wireless Android Auto.
CarPlay and Android Auto support Full-Screen display or Normal Display.
Display mode: There are 3 display moods: day mood, night mood, and auto. Set the instrument panel display mode, under Auto Mode it will auto switch with Tesla large display.
Body Color: Support 5 Colors of the Body.
Time Zone: Set the Instrument Panel time zone, default GMT+8
Time Format: Set the Instrument Panel time display format with 12/24.
Steer Wheel control: Enable/disable the mobile phone interface control function
Screen Brightness:
Auto mode – Panel brightness automatically synchronizes with the central dashboard.
Manual mode – Slide up/down on the right side of the panel changes the brightness.
Settings UI
4.2About the Device

Display the Device Info.

Steering Wheel Roller Operation

1. Left Push
   Short push: Switch to the previous song/ Hung up

2. Down Push
   Short push: Songs playing/pause
   Long push: Activate Siri/Google/Xiaoyu

3. Right Push
   Short push: Switch to the next song / Pick up the call

4. Left Push Short push: Back to the previous menu
   Long push: Exit mobile screen projection and back to the panel interface

5. Rolling In the Nonmobile screen Mirror control mode, scroll up and down to switch the instrument interface / mobile screen projection interface. When the mobile phone is in the screen projection control mode, scroll the knob up and down to switch the mobile phone/instrument interface

6. Right Push Short push: If in mobile screen projection mode, short push activates CarPlay/Carlife/Android Auto.

Cautions: The Steering Wheel Roller Control Functions only work under Non-Automatic Driving Mode

CarPlay Connection

In System Settings, choose CarPlay as a smartphone connection, and choose display mode. Click Confirm, and the device will restart.
Open the Bluetooth of the iPhone, search BT_LINK ID, and connect with this BT ID. Will auto-connect with Carplay Screen Projection UI.

1. Search the BT ID: BT_LINK, and click to connect
2. Click Pairing
3. Allow address book synchronization
4. Click Use CarPlayCarPlay Interface

Android Auto wired/wireless connection
Wired Connection
Settings ->System Settings ->Mobile Connection ->Choose A-Auto, Connect the mobile with the vehicle then a message will pop out.
Select Recharge-only and it’s successfully connected.
Wireless Connection
Settings ->System Settings)) Mobile Connection)) Choose A-Auto (As pictured below), Activate WIFI in the mobile and use Bluetooth searching and connect BT-LINK. After 10 seconds, Android Auto will automatically finish the connection.

After a successful connection, the instrument panel interface will automatically switch.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm of the radiator and your body: Use only the supplied antenna.
FCC ID: 2A7EP-T3
Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment
Caution:1. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>