SZMP J1AS10G011 Solar Fountain 2023 Upgrade User Manual
- May 15, 2024
- SZMP
Table of Contents
Solar Floating Fountain
Number：J1AS10G011
Parts list
| Parts | Name | Quantity |
|---|---|---|
| A | Solar panel with pump | 1 |
| B | B1 | Nozzle 1 |
| B2 | Nozzle 2 | 1 |
| B3 | Nozzle 3 | 1 |
| B4 | Nozzle 4 | 1 |
| B5 | Nozzle 5 | 1 |
| B6 | Nozzle 6 | 1 |
| B7 | Nozzle 7 | 1 |
| B8 | Connection pipe | 1 |
| C | Plastic pipe | 4 |
| D | Fasteners | 4 |
| E | Filter cotton | 3 |
Assembly Method
- Please choose the Nozzles you like between B1-B7.
- Assembling the connecting pipe B8 and the nozzle B5,B6 or B7 into F.(as shown in fig.1)
- You can install the nozzles B1 , B2 , B3 ,B4 or F on solar fountain. (as shown in fig.2)
- Install the plastic pipe . put D into C , a total of four group(H). (as shown in fig.3)
- Install H into solar fountain(EVA open slot). (as shown in fig.4)
- The plastic pipe can be cut according to your requirement .
- Putting the product into water, making sure the water pump is completely immersed in water. Let the sunlight shine directly on the solar panel without any shade so that the water pump can start spraying water.
Product features
- The water pump will stop working on the rainy days or at night until the sunshine directly on the solar panel again.
- The height of the spray water will change with the change of sunlight .
- Lifespan：≥ 10000 h.
- Here are seven spray patterns.
Note
- You can choose the nozzles according to your preferences and environment.
- Make sure solar panel gain enough sunlight , Don’t cover the solar panel with sundries or garbage.
- Make sure you have put enough water in the fountain so that the pump can stay entirely under the water.
- The fountain should be put into the water to exhaust the air when the solar fountain is used for the first time.
- when there is enough sunlight , the spray height is too low or only a little water .please take out the filter cotton or rotor for cleaning or replacement.(as shown in the fig.5)
The first step : remove the nozzle
The second step : remove the water pump
The third step : Take out the filter cotton or rotor
The fourth step : Clean filter cotton or rotor
The fifth step : Reassemble the fountain
Specifications
Size of solar panel
(mm)| Power of solar panel
(W)| Voltage of solar panel
(V)| Voltage of water pump
(V)| Volume of flow (L/h)| Water height (cm)
---|---|---|---|---|---
Ф160| 3.5| 7| 5-7| 120-220| 30-60
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>