Baveke 39.4 Inch Small TV Stand for TV User Guide
- May 15, 2024
- Baveke
Table of Contents
Baveke 39.4 Inch Small TV Stand for TV
Tighten the screws to about 70% of their depth during installation (do not over-tighten), and then tighten all the screws when the installation is fully completed.
Illustration of Assembly Process
The document provides a step-by-step illustration of the assembly process for a piece of furniture, including various components and the tools required. The illustrations are accompanied by text detailing the specific parts and assembly instructions for each step.
Specifications
| Step | Required Parts | Assembly Instructions |
|---|---|---|
| 1 | Panel with one slot, Cabinet feet, Screws (Type A) | Orient the cabinet feet |
first, then screw in the screws without applying too much force.
2| Acrylic partition, Screws (Type D)| Attach the partition making sure to
align the holes correctly.
3| Acrylic partition with a narrower front, Screws (Type B)| Attach the
partition ensuring the correct orientation with the narrower side facing the
front.
4| Main top panel| Align the card slots of the top panel with the structure
and secure.
5 & 6| Acrylic panels, Screws (Type C)| Insert two acrylic panels into each
side slot.
7| Panel with two slots, Screws (Type A)| Insert the slot at the back first
then the acrylic plate into the front two slots.
8| Back panel, Screws (Type B)| Attach the back panel ensuring to align the
slot with the corresponding structure.
FAQ
- Q: How tight should the screws be during the initial installation?
- A: The screws should be tightened to about 70% of their depth during the initial installation to allow for adjustments. Once the installation is fully completed, all screws should be fully tightened.
- Q: What should I do if I have concerns or questions about the assembly?
- A: If you have any concerns, questions, or comments, you are encouraged to bring them to the attention of ZHUMUJIAJU. Contact details are provided for further assistance.
- Q: How can I ensure that the acrylic partitions are installed correctly?
- A: Make sure to align the slots and holes as indicated in the illustrations and follow the orientation instructions, with the narrower side of the partition facing the front when required.
Tighten the screws to about 70% of their depth during installation (do not over-tighten), and then tighten all the screws when the installation is fully completed.
As the picture shows:
Hold the long handle in your hand and use the short handle to tighten the screw
parts
All parts of the product and assembly tools
Required parts
Installation
Installation Methods
Required parts
Dear Mr/Ms.
Please accept our sincerest thanks and gratitude for your recent purchase with
us! It was truly our pleasure to serve you. Here ZHUMUJIAJU is a new brand and
devoted to promoting the “bamboo” culture. We advocate environmentally
friendly and healthy product concepts and strive to provide the highest level
of service possible. As a new brand, our team is groping forward and of
service possible. exploring more possibilities, we hope that your experience
with Us was a pleasant one and we can be of service to you again in the
future. As a valued customer, your comments and opinions are very important to
us. If you have any concerns, questions or comments. we hope that you will
bring them to our attention. If there are any other ways that we can serve you
better at this time or in the future please let us know.
Thank you once again for your business, and we will look forward to serving
you again in the future. Please contact Us if we can be of further service.
Sincerely.
- ZHUMUJ I AJU
- contact details
- Email: huangtenyuan@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>