Lifeline 240202 QSGuide Smartwatch User Manual
- June 21, 2024
- Lifeline
Table of Contents
Lifeline 240202 QSGuide Smartwatch
Product Information
Specifications
- Dimension : 46.9mm 41.7mm 15.4mm / 1.84in 1.64in 0.60in
- Weight : 38g / 1.34oz
- Battery : Rechargeable, 3.8V, 600mAh
- Charging voltage : 5V/DC 1.0A
- Waterproof : IPX7
Product Usage Instructions
Charging Your Smartwatch
-
To power on:
Press and hold the Help Button until the Smartwatch powers on. -
To power off:
Swipe until you see the Power Off screen, then press Power Off on the touchscreen.
Functions and Basic Settings
-
To check the steps:
Swipe to access the Step screen. Step counting is enabled by default. You can also view distance. -
To measure heart rate:
Wear the Smartwatch on the left hand. Select heart rate. After several seconds, the screen will display your heart rate BPM.
Activating an Alarm
To activate an alarm:
- Press and hold the Help Button for 3 seconds. The device will vibrate and display the alarm status on the screen.
- The Smartwatch will announce, “Your Help Call is in progress…” The message will repeat 3 times.
- The wearer can cancel the call by pressing the Help Button or tapping the X on the touchscreen within this time.
Fall Detection
If a fall is detected:
- The Smartwatch will announce to the user, “Fall has been detected…” The message will repeat 3 times.
- The wearer can cancel the fall alarm by pressing the Help Button or tapping the X on the touchscreen within this time.
What’s Included
Feature
Charging Your Smartwatch
- Connect the USB cable to the charging base and into the AC adapter. Plug into a power outlet NOT controlled by a light switch.
- Place the Smartwatch onto the charging base. You will hear a voice confirmation.
- Fully charge the battery daily or when battery is low.
Power On
Press and hold the Help Button until the Smartwatch powers on.
Power Off
Swipe until you see the Power Off screen, press Power Off on the
touchscreen.
The Smartwatch battery is not removable.
Functions and Basic Settings
- When the Smartwatch is turned on, you can swipe left or right to view all available functions, such as heart rate, step tracking, settings, and more.
- On the Smartwatch Home screen, you can see the time, date, battery information, network connection, and signal strength.
Steps
Swipe to access the Step screen. Step counting is enabled by default. You can
also view distance.
Heart Rate Measurement
Wear the Smartwatch on the left hand. Select heart rate. After several
seconds, the screen will display your heart rate BPM.
General Specifications
- Dimension : 46.9mm 41.7mm 15.4mm/ 1.84in 1.64in 0.60in
- Weight : 38g/1.34oz
- Battery : Rechargeable, 3.8V, 600mAh
- Charging voltage : 5V/DC 1.0A
- Waterproof : IPX7
Activating an Alarm
Press and hold the Help Button for 3 seconds. The device will vibrate and display the alarm status on the screen. The Smartwatch will announce, “Your Help Call is in progress…”. The message will repeat 3 times. During this time, the wearer can cancel the call by pressing the Help Button or tapping the X on the touchscreen. If the alarm is not canceled during the 3 announcements, the response center will be called.
Fall Detection
The Smartwatch can automatically detect a fall. When this occurs the Smartwatch will announce to the user “Fall has been detected…”. This message will repeat 3 times. During this time, the wearer can cancel the fall alarm by pressing the Help Button or tapping the X on the touchscreen. If the alarm is not canceled during the 3 announcements, the response center will be called.
- Some daily activities like sports or even sitting down abruptly can trigger the fall alarm.
- In certain situations, some movements may not register as a fall and would not be detected. Always press your Help Button when able.
- Your Smartwatch uses GPS and Wi-Fi technology to identify your location. In good conditions, the product should provide a location that is accurate within 30 feet or less. However, the performance of GPS can be affected by a wide range of factors, including obstructions, metal objects in the vicinity, structures that block the signal from satellites, weather and other factors. Your Smartwatch uses the cellular network to communicate. The Smartwatch’s location, network provider service availability, and other issues may disrupt communications.
Please comply with the instructions to extend the Smartwatch’s life:
- Do not use or store the watch in dusty, hot, cold, electric, or chemical areas. Keep the watch and accessories dry.
- Do not drop, shake or knock the Smartwatch. Rough handling can break it.
- Clean the Smartwatch with a dry cloth.
- Do not disassemble the Smartwatch as it will void your warranty.
- To avoid an accident, never allow the Smartwatch to distract you while driving.
- Turn off the Smartwatch in an aircraft and follow any restrictions. Wireless devices can cause interference in aircraft.
Smartwatch
The Smartwatch is designed to support a healthy and active lifestyle and
provides fast and easy access to assistance at the press of a button.
FAQ
Q: How accurate is the GPS location provided by the Smartwatch?
A: In good condition, the product should provide a location accurate within 30
feet or less. However, GPS performance can be affected by various factors like
obstructions, weather, and other factors.
Q: Can movements always be detected as falls by the Smartwatch?
A: In certain situations, some movements may not register as a fall and would
not be detected. It’s advisable to press the Help Button when able for
assistance.
Q: How does the Smartwatch communicate?
A: The Smartwatch uses GPS, Wi-Fi, and the cellular network to communicate and
provide assistance at the press of a button.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>