L Shaped Metal Twin XL Triple Bunk Bed Instructions
- June 17, 2024
- L Shaped Metal
Table of Contents
L Shaped Metal Twin XL Triple Bunk Bed
ASSEMBLY INSTRUCTIONS
SAFETY WARNINGS AND GENERAL NOTES:
-
Follow the information on the warnings on the bunk bed end structure and on the carton. Do not remove the warning label from the bed.
-
Always use the recommended size mattress on mattress support, or both, to help prevent the likelihood of entrapment or falls.
-
Do not allow children under 6 years of age to use the upper bunk.
-
Periodically check and ensure the guardrail, ladder and other components are in their proper position, free from damage, and all connectors are tight.
-
Do not allow horseplay on or under beds.
-
Always prohibit jumping on the bed.
-
Prohibit more than one person on upper bunk.
-
Always use the ladder for entering and leaving the upper bunk.
-
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
-
Use of a night-tight may provide added safely precaution for a child using the upper bunk.
-
Always use guardrails on both long sides of the upper bunk.
-
If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
-
The use of water or sleep flotation mattresses is prohibited. STRANGULATION HAZARD-Never attach or hang items to any part of the bunk bed that are not designed for use with the bed.
-
Keep these instructions for future reference.
-
We recommend assembling your bunk bed on the shipping carton to protect your floor or carpet.
-
Be certain all staples are out of the box before beginning assembly on the shipping carton.
-
USE ONLY MATTRESSES WHICH ARE AS THE TABLE BELOW ON UPPER AND ON LOWER BUNKS.
Down bed
Bed type Length Width Thickness
Twin Standard 74”- 75” 38Vz 8”max -
SURFACE OF THE MATTRESS MUST BE AT LEAST 5”(127MM) BELOW THE UPPER EDGE OF GUARDRAILS.
-
Replacement Parts:
Replacement Parts, including additional guardrails, may be obtained from any of our dealers
- Use A, H and E accessories to fix and tighten #19 to the left and right of the bed respectively.
- Use A, H and E accessories to fix and tighten #19 to the left and right of the bed respectively.
- New upgrade, add #19support foot, stronger
- New upgrade, add #19support foot, stronger
PARTLIT
HARDWARE LIST
FEATURES
INSTALLATION
- Step 1: Use hardware A, C, F, G to connect #3, #3, #3, #6, #3, #3, #18 together to get a component 1.
- Step 2: Use hardware F, A, G to connect #1 and #6 together to get a component 2.
- Step 3: Use hardware F, C, G to connect #2, #7, #8, #9, #10, #18 together to get a component 3.
- Step 4: Use hardware A and G to connect component 1, component 2 and component 3 together to get a left bed.
- Step 5: Use hardware A, C, F, G to connect #3, #4, #6, #13, #18 together to get a component 4.
- Step 6: Use hardware F, A, and G to connect #1 and #6 together to get a component 5.
- Step 7: Use hardware F, C, G to connect #2, #7, #8, #9, #10, #18 together to get a component 6.
- Step 8: Use hardware A and G to connect component 4, component 5 and component 6 together to get a right bed.
- Step 9: Use hardware F, A, B, G, connect #5 and #14 together, reassemble 2 to get two identical components 7.
- Step 10: Use hardware C, G, connect the two components 7 to the left bed and the right bed.
- Step 10: Use hardware C, G, connect the two components 7 to the left bed and the right bed.
- Step 12: Use hardware C and G to tighten #10 with component 7.
- Step 13: Use hardware A and G to continue to install #11 to specify the location of the drawing.
- Step 14: Use hardware A and G to continue to install #12 at the specified location of the drawing.
- Step 15: Use hardware A and G to connect #11 and #16 to the bed and tighten them.
- Step 16: Use hardware E, A and G to connect #17 left and right from the bed and tighten it.
Completed attic bed
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>