Folews 6-Tier Wire Shelving Unit with Wheels Installation Guide

Folews 6-Tier Wire Shelving Unit with Wheels

Specifications

• 6-Shelf Storage Unit
• Dimensions: [Insert Dimensions Here]
• Material: [Insert Material Here]
• Color: [Insert Color Here]

Product Usage Instructions

Installation

1. Install the 4 wheels into the bottom poles (C). Note: Both the wheels (E) and leveling feet (F) can be adjusted to keep the shelf stable.
2. Screw the top poles (D) to the bottom poles (C).
3. Install the bottom shelf:
   • Place two joint clips (B) into the appropriate groove on each pole as instructed. Ensure the arrows on the clips are facing upward.
   • Gently slide down one shelf (A) through the bottom pole (C) until it fits firmly against all the joint clips (B). Ensure it is no more than 6 inches from the floor.
   • Ensure that the joint clips (B) for each pole are at the same height to ensure shelf levelness.
4. Repeat step 2 to install the remaining 4 shelves (A) and the 2 hangers (G). Choose a suitable height between each shelf.
5. Repeat step 2 to install one more shelf (A). Choose a suitable height between each shelf.

Tips

Use the flat washer (H), expansion screw (I), and screw (J) to fix the whole shelf on the wall to prevent tip-over:

1. Screw the expansion screw (I) into the wall, at the top shelf.
2. Put on the flat washer (H), and screw the screw (J) into the wall.

Safety Information

• Recommended to be installed by two adults. Be careful when handling.
• Recommended to install on a soft surface, such as carpet, to prevent scratching the floor finish.
• The black circular plastic pieces are only used to separate and protect the shelves during shipping.

FAQ

Q: Can I adjust the height of each shelf?

• A: Yes, you can choose a suitable height between each shelf during installation.

Q: How do I secure the shelf to the wall?

• A: Use the provided flat washer, expansion screw, and screw to fix the whole shelf on the wall to prevent tip-over. Follow the provided instructions for securing it properly.

Contents

If there are any missing parts, please contact us before assembly via email at cs@folews.biz .

Installation

1. Install the 4 wheels into the bottom poles(C).
   • NOTE: Both the wheels(E) and leveling feet(F) can be adjusted to keep the shelf stable.
2. Install the bottom shelf:
   • Place two joint clips (B) into the appropriate groove on each pole as below (8 joint clips in total). Ensure the arrows on the clips are facing upward.
   • Gently slide down one shelf (A) through the bottom pole (C) until it fits firmly against all the joint clips (B). Ensure that it is no more than 6 inches from the floor.
   • NOTE: The joint clips (B) for each pole must be at the same height to ensure that the shelf is level.
3. Repeat step 2 to install one more shelf(A). Choose a suitable height between each shelf.
   • Tips: Use the flat washer(H), expansion screw(I), and screw(J) to fix the whole shelf on the wall to prevent tip-over:
   • Screw the expansion screw(I) into the wall, at the top shelf.
   • Put on the flat washer(H), and screw the screw(J) into the wall.
4. .Screw the top poles (D)to the bottom poles (C).
5. Repeat step 2 to install the remaining 4 shelves(A) and the 2 hangers(G). Choose a suitable height between each shelf.

Safety Information

1. Recommended to be installed by two adults. Be careful when handling.
2. Recommended to install on a soft surface, such as carpet, to prevent scratching the floor finish.
3. The black circular plastic pieces are only used to separate and protect the shelves during shipping.

CAUTION: Do not allow children to climb or play in or around the shelves.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>